u-boot.git/common/cmd_flash.c, branch LABEL_2006_06_30_2020

Fixes common/cmd_flash.c:

2006-04-11T12:39:21+00:00

   - fix some compiler/parser error, if using m68k tool chain
   - optical fix for protect on/off all messages, if using more
     then one bank
  Patch by Jens Scharsig, 28 July 2005

* Changes/fixes for drivers/cfi_flash.c:

2006-04-01T11:44:14+00:00

  - Add Intel legacy lock/unlock support to common CFI driver

    On some Intel flash's (e.g. Intel J3) legacy unlocking is
    supported, meaning that unlocking of one sector will unlock
    all sectors of this bank. Using this feature, unlocking
    of all sectors upon startup (via env var "unlock=yes") will
    get much faster.

  - Fixed problem with multiple reads of envronment variable
    "unlock" as pointed out by Reinhard Arlt & Anders Larsen.

  - Removed unwanted linefeeds from "protect" command when
    CFG_FLASH_PROTECTION is enabled.

  - Changed p3p400 board to use CFG_FLASH_PROTECTION

  Patch by Stefan Roese, 01 Apr 2006

* Changes/fixes for drivers/cfi_flash.c:
  - Correctly handle the cases where CFG_HZ != 1000 (several
    XScale-based boards)
  - Fix the timeout calculation of buffered writes (off by a
    factor of 1000)
  Patch by Anders Larsen, 31 Mar 2006

Added support for TQM834x boards.

2005-10-11T17:09:42+00:00

Add configuration for IFM AEV FIFO board.

2005-08-10T13:14:32+00:00

Minor coding style cleanup.

Fix compiler warnings with older GCC versions

2005-08-09T15:25:22+00:00

Add common (with Linux) MTD partition scheme and "mtdparts" command

2005-08-07T23:03:24+00:00

Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.

Fix compile problem in cmd_flash.c

2005-08-05T09:10:31+00:00

Patch by Teun Grinwis, 05 Aug 2005

Coding style cleanup

2005-08-02T15:06:17+00:00

Add new argument format for flash commands to allow for usage like

2005-07-21T09:45:50+00:00

"erase $(addr) +$(filesize)", i. e. a size argument can be used and
U-Boot will automaticially find the end of the corresponding sector.

* Code cleanup, mostly for GCC-3.3.x

2004-12-31T09:32:47+00:00

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.