u-boot.git/common/cmd_flash.c, branch U-Boot-1_1_4

Added support for TQM834x boards.

2005-10-11T17:09:42+00:00

Add configuration for IFM AEV FIFO board.

2005-08-10T13:14:32+00:00

Minor coding style cleanup.

Fix compiler warnings with older GCC versions

2005-08-09T15:25:22+00:00

Add common (with Linux) MTD partition scheme and "mtdparts" command

2005-08-07T23:03:24+00:00

Old, obsolete and duplicated code was cleaned up and replace by the
new partitioning method. There are two possible approaches now:
* define a single, static partition
* use mtdparts command line option and dynamic partitioning
Default is static partitioning.

Fix compile problem in cmd_flash.c

2005-08-05T09:10:31+00:00

Patch by Teun Grinwis, 05 Aug 2005

Coding style cleanup

2005-08-02T15:06:17+00:00

Add new argument format for flash commands to allow for usage like

2005-07-21T09:45:50+00:00

"erase $(addr) +$(filesize)", i. e. a size argument can be used and
U-Boot will automaticially find the end of the corresponding sector.

* Code cleanup, mostly for GCC-3.3.x

2004-12-31T09:32:47+00:00

* Cleanup confusing use of CONFIG_ETH*ADDR - ust his only to
  pre-define a MAC address; use CONFIG_HAS_ETH* to enable support for
  additional ethernet addresses.

* Cleanup drivers/i82365.c - avoid duplication of code

* Fix bogus "cannot span across banks" flash error message

* Add support for CompactFlash for the CPC45 Board.

* Patches by Thomas Viehweger, 16 Mar 2004:

2004-03-23T22:14:11+00:00

  - show PCI clock frequency on MPC8260 systems
  - add FCC_PSMR_RMII flag for HiP7 processors
  - in do_jffs2_fsload(), take load address from load_addr if not set
    explicit, update load_addr otherwise
  - replaced printf by putc/puts when no formatting is needed
    (smaller code size, faster execution)

* Cleanup lowboot code for MPC5200

2004-01-02T14:00:00+00:00

* Minor code cleanup (coding style)

* Patch by Reinhard Meyer, 30 Dec 2003:
  - cpu/mpc5xxx/fec.c: added CONFIG_PHY_ADDR, added CONFIG_PHY_TYPE,
  - added CONFIG_PHY_ADDR to include/configs/IceCube.h,
  - turned debug print of PHY registers into a function (called in two places)
  - added support for EMK MPC5200 based modules

* Fix MPC8xx PLPRCR_MFD_SHIFT typo

* Add support for TQM866M modules

* Fixes for TQM855M with 4 MB flash (Am29DL163 = _no_ mirror bit flash)

* Fix a few compiler warnings