u-boot.git/common/cmd_ide.c, branch v1.3.0

Fixed mips_io_port_base build errors.

2007-11-17T00:37:44+00:00

This patch has been sent on:
- 29 Sep 2007

Although mips_io_port_base is currently a part of IDE command, it is quite
fundamental for MIPS I/O port access such as in[bwl] and out[bwl]. So move
it to MIPS general part, and introduce `set_io_port_base()' from Linux.

This patch is triggered by multiple definition of `mips_io_port_base' build
error on gth2 (and tb0229 also needs this fix.)

board/gth2/libgth2.a(gth2.o): In function `log_serial_char':
/home/skuribay/devel/u-boot.git/board/gth2/gth2.c:47: multiple definition of `mips_io_port_base'
common/libcommon.a(cmd_ide.o):/home/skuribay/devel/u-boot.git/common/cmd_ide.c:712: first defined here
make: *** [u-boot] Error 1

Signed-off-by: Shinya Kuribayashi 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

Fix warning differ in signedness in common/cmd_ide.c

2007-11-16T21:42:03+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD

IDE: - make ide_inb () and ide_outb () "weak", so boards can

2007-08-28T15:39:14+00:00

          define there own I/O functions.
          (Needed for the pcs440ep board).
        - The default I/O Functions are again 8 Bit accesses.
        - Added CONFIG_CMD_IDE for the pcs440ep Board.

Signed-off-by: Heiko Schocher

Merge with /home/wd/git/u-boot/custodian/u-boot-testing

2007-08-05T23:11:08+00:00

Merge branch 'testing' into working

2007-08-03T07:23:23+00:00

Conflicts:

	CHANGELOG
	fs/fat/fat.c
	include/configs/MPC8560ADS.h
	include/configs/pcs440ep.h
	net/eth.c

make show_boot_progress () weak.

2007-07-13T07:54:17+00:00

Signed-off-by: Heiko Schocher

common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS.

2007-07-08T23:02:23+00:00

Signed-off-by: Jon Loeliger

common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*).

2007-07-03T22:23:09+00:00

This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger

[PCS440EP] upgrade the PCS440EP board:

2007-06-22T17:11:54+00:00

                - Show on the Status LEDs, some States of the board.
                - Get the MAC addresses from the EEProm
                - use PREBOOT
                - use the CF on the board.
                - check the U-Boot image in the Flash with a SHA1
                  checksum.
                - use dynamic TLB entries generation for the SDRAM

Signed-off-by: Heiko Schocher

Fix config problems on SC3 board; make ide_reset_timeout work.

2007-06-08T08:24:58+00:00