u-boot.git/common/cmd_led.c, branch master

Move all command code into its own directory

2016-01-25T15:39:43+00:00

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Reviewed-by: Heiko Schocher 
Acked-by: Stefan Roese 
Acked-by: Przemyslaw Marczak

cmd_led: Extend led command to support blinking and more leds

2015-04-23T13:43:08+00:00

This patch extends the U-Boot "led" command to support automatic blinking
by setting a blink frequency in milliseconds. Additionally the number of
supported LEDs is increased to 6 (0...5).

This will be used by the PCA9551 LED driver.

Signed-off-by: Stefan Roese 
Reviewed-by: Tom Rini

Coding Style cleanup: remove trailing white space

2013-10-14T20:06:53+00:00

Signed-off-by: Wolfgang Denk

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set

2013-03-07T16:22:57+00:00

This fixes the gpio_led driver which needs to compare againt a
STATUS_LED_ON to enable a led.

Signed-off-by: Otavio Salvador

cmd_led.c: Standardize format of help and usage info.

2012-12-06T20:56:39+00:00

Current "led" help and usage info has redundancy and extraneous
newlines, tweak it to be consistent with other commands.

Signed-off-by: Robert P. J. Day

Convert cmd_usage() calls in common to use a return value

2012-03-06T20:09:46+00:00

Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass

led: remove camel casing of led identifiers globally

2011-09-13T06:30:52+00:00

Result of running the following command to address Wolfgang's
comment about camel case:

for file in `find . | grep '\.[chS]$'`; do perl -i -pe
's/(green|yellow|red|blue)_LED_(on|off)/$1_led_$2/g' $file; done

Discussion:
http://patchwork.ozlabs.org/patch/84988/

Signed-off-by: Jason Kridner 
Signed-off-by: Joel A Fernandes 
Signed-off-by: Sandeep Paulraj

led: Remove state-saving of led for toggle functionality and add toggle option to led command

2011-09-04T09:36:22+00:00

* Read the led output state from GPIO instead saving state in memory when it is [re]set
* Added a toggle option to the led command

Previous discussion:
http://lists.denx.de/pipermail/u-boot/2011-May/093068.html

Changes since v1:
Fixed checkpatch errors

Signed-off-by: Joel A Fernandes 
Signed-off-by: Jason Kridner 
Signed-off-by: Sandeep Paulraj

led: Fixed setting of STATUS_LED_BIT1 when led_name is 'all'

2011-09-04T09:36:22+00:00

Fix for only one led getting set or reset when the led_name is 'all'

Previous discussion:
http://lists.denx.de/pipermail/u-boot/2011-May/093068.html

Changes since v1:
Fixed checkpatch if statement error noticed by Sergei.

Signed-off-by: Joel A Fernandes 
Signed-off-by: Jason Kridner 
Cc: Sergei Shtylyov 
Signed-off-by: Sandeep Paulraj