u-boot.git/common/cmd_mmc.c, branch v2011.06 Unnamed repository; edit this file 'description' to name the repository. mmc: enable partition switch function for emmc 2011-05-18T19:37:03+00:00 Lei Wen leiwen@marvell.com 2011-05-02T16:26:26+00:00 bc897b1d4d86597311430dbe7b3e6c807c8c53e5 For emmc, it may have up to 7 partitions: two boot partitions, one user partition, one RPMB partition and four general purpose partitions. (Refer to JESD84-A44.pdf/page 154) As bootloader may need to read out or reflashing images on those different partitions, it is better to enable the partition switch with console command support. Also for partition would be restore to user partition(part 0) when CMD0 is used, so change mmc_init routine to perform normal initialization only once for each slot, unless use the rescan command to force init again. Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com> 
For emmc, it may have up to 7 partitions: two boot partitions, one
user partition, one RPMB partition and four general purpose partitions.
(Refer to JESD84-A44.pdf/page 154)

As bootloader may need to read out or reflashing images on those

different partitions, it is better to enable the partition switch with
console command support.

Also for partition would be restore to user partition(part 0) when CMD0
is used, so change mmc_init routine to perform normal initialization
only once for each slot, unless use the rescan command to force init
again.

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
cmd_mmc: eliminate device num in the mmc command 2011-05-18T19:36:35+00:00 Lei Wen leiwen@marvell.com 2011-05-02T16:26:25+00:00 ea6ebe21772568ee97fb5c23c01e993140f0e0e6 mmc command applied device, like ide and usb... Signed-off-by: Lei Wen <leiwen@marvell.com> Acked-by: Andy Fleming <afleming@freescale.com> 
mmc command applied device, like ide and usb...

Signed-off-by: Lei Wen <leiwen@marvell.com>
Acked-by: Andy Fleming <afleming@freescale.com>
mmc: show mmc capacity using print_size 2011-04-13T11:35:22+00:00 Minkyu Kang mk7.kang@samsung.com 2011-01-04T01:04:19+00:00 940e078297fc5f8707fe11003c9fda4a275fad5b Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> Signed-off-by: Andy Fleming <afleming@freescale.com> 
Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
Signed-off-by: Andy Fleming <afleming@freescale.com>
cmd_mmc: use common usage function 2010-09-21T19:37:08+00:00 Mike Frysinger vapier@gentoo.org 2010-07-29T17:40:43+00:00 e2fad3fce947edf97ff7186bcf36b9adf113ac94 Rather than using a custom "Usage:", use the common cmd_usage() function, and tail into it now that it returns 1 for us. Signed-off-by: Mike Frysinger <vapier@gentoo.org> 
Rather than using a custom "Usage:", use the common cmd_usage() function,
and tail into it now that it returns 1 for us.

Signed-off-by: Mike Frysinger <vapier@gentoo.org>
mmc: print out partition table 2010-09-18T21:47:28+00:00 Lei Wen leiwen@marvell.com 2010-09-13T14:07:28+00:00 8f3b96427aa573d5b300788e6ff5e989cff1e351 Signed-off-by: Lei Wen <leiwen@marvell.com> 
Signed-off-by: Lei Wen <leiwen@marvell.com>
Prepare v2010.09-rc1 2010-09-09T22:16:19+00:00 Wolfgang Denk wd@denx.de 2010-09-09T22:16:19+00:00 2d941de9d5c7ba00dc19787dfa0aac2949fd00fb Coding style cleanup. Signed-off-by: Wolfgang Denk <wd@denx.de> 
Coding style cleanup.

Signed-off-by: Wolfgang Denk <wd@denx.de>
fix cmd_mmc.c, line 136 missing " 2010-08-10T07:43:26+00:00 Reinhard Meyer u-boot@emk-elektronik.de 2010-08-09T15:30:51+00:00 a9804be86858cf7ee3e39e6a371ecd56da517ce8 Remove warning for missing " at the end of line 136 Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de> 
Remove warning for missing " at the end of line 136

Signed-off-by: Reinhard Meyer <u-boot@emk-elektronik.de>
various cmd_* files: fixed layout a little bit 2010-08-08T23:07:37+00:00 Frans Meulenbroeks fransmeulenbroeks@gmail.com 2010-07-31T13:01:53+00:00 388a29d0243eaca258b4c21e9456b09a0fff76a6 Most of the files have U_BOOT_CMD on a separate line, but a few didn't and had the first line on the same line as U_BOOT_CMD. This changes these files by adding a line break and a tab Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> 
Most of the files have U_BOOT_CMD on a separate line,
but a few didn't and had the first line on the same line
as U_BOOT_CMD.

This changes these files by adding a line break and a tab

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
various cmd_* files: remove the command name from the help message 2010-08-08T23:06:34+00:00 Frans Meulenbroeks fransmeulenbroeks@gmail.com 2010-07-31T13:01:52+00:00 cc9f607beb49d4d3556c326efb83a0a51784e484 removed the command name from the help message as it is already printed. for cmd_mmc also rewrote the message a little bit Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com> 
removed the command name from the help message as it is already printed.
for cmd_mmc also rewrote the message a little bit

Signed-off-by: Frans Meulenbroeks <fransmeulenbroeks@gmail.com>
cmd_usage(): simplify return code handling 2010-07-24T18:43:57+00:00 Wolfgang Denk wd@denx.de 2010-07-16T23:06:04+00:00 47e26b1bf91ddef69f4a3892815c857db094cef9 Lots of code use this construct: cmd_usage(cmdtp); return 1; Change cmd_usage() let it return 1 - then we can replace all these ocurrances by return cmd_usage(cmdtp); This fixes a few places with incorrect return code handling, too. Signed-off-by: Wolfgang Denk <wd@denx.de> 
Lots of code use this construct:

	cmd_usage(cmdtp);
	return 1;

Change cmd_usage() let it return 1 - then we can replace all these
ocurrances by

	return cmd_usage(cmdtp);

This fixes a few places with incorrect return code handling, too.

Signed-off-by: Wolfgang Denk <wd@denx.de>