u-boot.git/common/cmd_mmc.c, branch v2015.04

mmc: Implement SD/MMC versioning properly

2015-02-23T17:34:29+00:00

The SD/MMC version scheme was buggy when dealing with standard
major.minor.change cases. Fix it by using something similar to
the linux's kernel versioning method.

Signed-off-by: Pantelis Antoniou 
Tested-by: Jaehoon Chung 
Reported-by: Stephen Warren 
Tested-by: Stephen Warren

mmc: extend mmcinfo output to show partition write reliability settings

2015-01-19T15:41:51+00:00

This extends the mmcinfo hardware partition info output to show
partitions with write reliability enabled with the "WRREL" string.
If the partition does not have write reliability enabled the "WRREL"
string is omitted; this is analogous to the ehhanced attribute.

Example output:

Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
Erase Group Size: 8 MiB
HC WP Group Size: 16 MiB
User Capacity: 13.8 GiB ENH WRREL
User Enhanced Start: 0 Bytes
User Enhanced Size: 512 MiB
Boot Capacity: 16 MiB ENH
RPMB Capacity: 128 KiB ENH
GP1 Capacity: 64 MiB ENH WRREL
GP2 Capacity: 64 MiB ENH WRREL

Signed-off-by: Diego Santa Cruz

mmc: extend the mmc hwpartition sub-command to change write reliability

2015-01-19T15:41:51+00:00

This change extends the mmc hwpartition sub-command to change the
per-partition write reliability settings. It also changes the
syntax used for the enhanced user data area slightly to better
accomodate the write reliability option.

Signed-off-by: Diego Santa Cruz

mmc: add mmc hwpartition sub-command to do eMMC hardware partitioning

2015-01-19T15:41:51+00:00

Adds the mmc hwpartition sub-command to perform eMMC hardware
partitioning on an mmc device. The number of arguments can be
large for a complex partitioning, but as the partitioning has
to be done in one go it is difficult to make it simpler.

Signed-off-by: Diego Santa Cruz

mmc: show the erase group size and HC WP group size in mmcinfo output

2015-01-19T15:04:46+00:00

This adds the erase group size and high-capacity WP group size to
mmcinfo's output. The erase group size is necessary to properly align
erase requests on eMMC. The high-capacity WP group size is necessary
to properly align partitions on eMMC.

Signed-off-by: Diego Santa Cruz

mmc: display size and start of eMMC enhanced user data area in mmcinfo

2015-01-19T15:02:29+00:00

This adds output to show the eMMC enhanced user data area size and offset
along with the partition sizes in mmcinfo's output.

Signed-off-by: Diego Santa Cruz

mmc: skip mmcinfo partition info processing for eMMC < 4.41

2015-01-19T15:02:21+00:00

eMMC partitions are defined as of eMMC 4.41, but mmcinfo process
partition info for eMMC >= 4.0, change it to do it for >= 4.41

Signed-off-by: Diego Santa Cruz

mmc: make eMMC general purpose partition numbering match spec

2015-01-19T15:01:46+00:00

The eMMC spec numbers general purpose partitions starting at 1, but
the mmcinfo output follows the internal numbering which starts at 0.
Make the mmcinfo command output number partitions as in the eMMC
spec to avoid confusion.

Signed-off-by: Diego Santa Cruz

mmc: extend mmcinfo to show enhanced partition attribute

2015-01-19T15:01:34+00:00

This extends the mmcinfo command's output to show which eMMC partitions
have the enhanced attribute set. Note that the eMMC spec says that
if the enhanced attribute is supported then the boot and RPMB
partitions are of the enhanced type.

The output of mmcinfo becomes:
Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
User Capacity: 13.8 GiB ENH
Boot Capacity: 16 MiB ENH
RPMB Capacity: 128 KiB ENH
GP1 Capacity: 64 MiB ENH
GP2 Capacity: 64 MiB ENH

Signed-off-by: Diego Santa Cruz

mmc: show hardware partition sizes in mmcinfo output

2015-01-19T15:00:11+00:00

There is currently no command that will provide an overview of the hardware
partitions present on an eMMC device, one has to switch to every partition
via "mmc dev" and run mmcinfo for each to get the partition's capacity.
This commit adds a few lines of output to mmcinfo with the sizes of the
present partitions, like this:

Device: OMAP SD/MMC
Manufacturer ID: fe
OEM: 14e
Name: MMC16
Tran Speed: 52000000
Rd Block Len: 512
MMC version 4.41
High Capacity: Yes
Capacity: 13.8 GiB
Bus Width: 4-bit
User Capacity: 13.8 GiB
Boot Capacity: 16 MiB
RPMB Capacity: 128 KiB
GP1 Capacity: 64 MiB
GP2 Capacity: 64 MiB

panto: Minor edit removing superfluous parentheses.

Signed-off-by: Diego Santa Cruz 
Signed-off-by: Pantelis Antoniou