u-boot.git/common/cmd_nvedit.c, branch v1.3.0 Unnamed repository; edit this file 'description' to name the repository. OneNAND support (take #2) 2007-09-17T06:19:08+00:00 Kyungmin Park kmpark@infradead.org 2007-09-10T08:15:14+00:00 d7e8ce101a4a45ed6ed45739fc2de5f87b13f7f1 [PATCH 3/3] OneNAND support (take #2) OneNAND support at U-Boot Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com> 
[PATCH 3/3] OneNAND support (take #2)

OneNAND support at U-Boot

Signed-off-by: Kyungmin Park <kyungmin.park@samsung.com>
[ARM] TI DaVinci support, hopefully final 2007-08-10T18:26:18+00:00 Sergey Kubushyn ksi@koi8.net 2007-08-10T18:26:18+00:00 c74b2108e31fe09bd1c5d291c3cf360510d4f13e Add support for the following DaVinci boards: - DV_EVM - SCHMOOGIE - SONATA Changes: - Split into separate board directories - Removed changes to MTD_DEBUG (or whatever it's called) - New CONFIG_CMD party line followed - Some cosmetic fixes, cleanup etc. - Patches against the latest U-Boot tree as of now. - Fixed CONFIG_CMD_NET in net files. - Fixed CONFIG_CMD_EEPROM for schmoogie. - Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and DV_EVM. Can't check if it works on SONATA, don't have a board any more, but it at least compiles. Here is an excerpt from session log on SCHMOOGIE... U-Boot 1.2.0-g6c33c785-dirty (Aug 7 2007 - 13:07:17) DRAM: 128 MB NAND: 128 MiB In: serial Out: serial Err: serial ARM Clock : 297MHz DDR Clock : 162MHz ETH PHY : DP83848 @ 0x01 U-Boot > iprobe Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F U-Boot > ping 192.168.253.10 host 192.168.253.10 is alive U-Boot > Signed-off-by: Sergey Kubushyn <ksi@koi8.net> Acked-by: Dirk Behme <dirk.behme@gmail.com> Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com> Acked-by: Stefan Roese <sr@denx.de> 
Add support for the following DaVinci boards:
- DV_EVM
- SCHMOOGIE
- SONATA

Changes:

- Split into separate board directories
- Removed changes to MTD_DEBUG (or whatever it's called)
- New CONFIG_CMD party line followed
- Some cosmetic fixes, cleanup etc.
- Patches against the latest U-Boot tree as of now.
- Fixed CONFIG_CMD_NET in net files.
- Fixed CONFIG_CMD_EEPROM for schmoogie.
- Made sure it compiles and works (forceenv() link problem) on SCHMOOGIE and
   DV_EVM. Can't check if it works on SONATA, don't have a board any more,
   but it at least compiles.

Here is an excerpt from session log on SCHMOOGIE...

U-Boot 1.2.0-g6c33c785-dirty (Aug  7 2007 - 13:07:17)

DRAM:  128 MB
NAND:  128 MiB
In:    serial
Out:   serial
Err:   serial
ARM Clock : 297MHz
DDR Clock : 162MHz
ETH PHY   : DP83848 @ 0x01
U-Boot > iprobe
Valid chip addresses: 1B 38 3A 3D 3F 50 5D 6F
U-Boot > ping 192.168.253.10
host 192.168.253.10 is alive
U-Boot >

Signed-off-by: Sergey Kubushyn <ksi@koi8.net>
Acked-by: Dirk Behme <dirk.behme@gmail.com>
Acked-by: Zach Sadecki <Zach.Sadecki@ripcode.com>
Acked-by: Stefan Roese <sr@denx.de>
Fix some compile problems introduced by the latest CFG_CMD_xxx cleanup 2007-07-11T21:03:06+00:00 Stefan Roese sr@denx.de 2007-07-11T10:13:53+00:00 3865b1fb7843a08ad49a6319a36415752276ff48 Signed-off-by: Stefan Roese <sr@denx.de> 
Signed-off-by: Stefan Roese <sr@denx.de>
common/: Remove lingering references to CFG_CMD_* symbols. 2007-07-10T16:02:44+00:00 Jon Loeliger jdl@freescale.com 2007-07-10T16:02:44+00:00 902531788376046da212afd1661cffb62f3daa1c Fixed some broken instances of "#ifdef CMD_CFG_IDE" too. Those always evaluated TRUE, and thus were always compiled even when IDE really wasn't defined/wanted. Signed-off-by: Jon Loeliger <jdl@freescale.com> 
Fixed some broken instances of "#ifdef CMD_CFG_IDE" too.
Those always evaluated TRUE, and thus were always compiled
even when IDE really wasn't defined/wanted.

Signed-off-by: Jon Loeliger <jdl@freescale.com>
common/cmd_[i-n]*: Remove obsolete references to CONFIG_COMMANDS. 2007-07-08T23:02:23+00:00 Jon Loeliger jdl@freescale.com 2007-07-08T23:02:23+00:00 c76fe47425afc7d5d670ff0539823c85d65d9c42 Signed-off-by: Jon Loeliger <jdl@freescale.com> 
Signed-off-by: Jon Loeliger <jdl@freescale.com>
common/cmd_[i-z]* : Augment CONFIG_COMMANDS tests with defined(CONFIG_CMD_*). 2007-07-03T22:23:09+00:00 Jon Loeliger jdl@jdl.com 2007-06-12T00:01:54+00:00 65c450b47a62659d522cfa8f4fa1e4e5c60dccd0 This is a compatibility step that allows both the older form and the new form to co-exist for a while until the older can be removed entirely. All transformations are of the form: Before: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) After: #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT) Signed-off-by: Jon Loeliger <jdl@freescale.com> 
This is a compatibility step that allows both the older form
and the new form to co-exist for a while until the older can
be removed entirely.

All transformations are of the form:
Before:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT)
After:
    #if (CONFIG_COMMANDS & CFG_CMD_AUTOSCRIPT) || defined(CONFIG_CMD_AUTOSCRIPT)

Signed-off-by: Jon Loeliger <jdl@freescale.com>
[patch] setenv(...) can delete environmentalvariables 2007-05-05T19:30:20+00:00 Jeffrey Mann mannj@embeddedplanet.com 2007-04-23T12:00:11+00:00 9ffd451afeb08e5be7ddae680487ec962b2bca25 update setenv() function so that entering a NULL value for the variable's value will delete the environmental variable Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com> Acked-by: Stefan Roese <sr@denx.de> 
update setenv() function so that entering a NULL value for the
variable's value will delete the environmental variable

Signed-off-by: Jeffrey Mann <mannj@embeddedplanet.com>
Acked-by: Stefan Roese <sr@denx.de>
Fix to make the baudrate changes immediate for the MCF52x2 family. 2006-12-19T23:29:43+00:00 Bartlomiej Sieka tur@semihalf.com 2006-12-19T23:29:43+00:00 c84bad0ef60e7055ab0bd49b93069509cecc382a 






Check for illegal character '=' in environment variable names.
2006-10-27T23:14:32+00:00

Wolfgang Denk
wd@denx.de

2006-10-27T23:14:32+00:00

471a7be7a042e95e440f5de969c9765214ae8d6e

Make sure the string passed as variable name does not contain a '='
character. This not only prevents the common error or typing
"setenv foo=bar" instead of "setenv foo bar", but (more importantly)
also closes a backdoor which allowed to delete write-protected
environment variables, for example by using "setenv ethaddr=".





Make sure the string passed as variable name does not contain a '='
character. This not only prevents the common error or typing
"setenv foo=bar" instead of "setenv foo bar", but (more importantly)
also closes a backdoor which allowed to delete write-protected
environment variables, for example by using "setenv ethaddr=".







GCC-4.x fixes: clean up global data pointer initialization for all boards.
2006-03-31T16:32:53+00:00

Wolfgang Denk
wd@pollux.denx.de

2006-03-31T16:32:53+00:00

d87080b721e4f8dca977af7571c5338ae7bb8db7