u-boot.git/common/cmd_nvedit.c, branch v2009.06

netloop: updates for NetLoop

2009-05-15T19:19:02+00:00

Fix some issues introduced from commit:
2f70c49e5b9813635ad73666aa30f304c7fdeda9
suggested by Mike Frysinger.

- added some comment for the env_id variable in common_cmd_nvedit.c
- moved some variables in fn scope instead of file scope
- NetInitLoop now static void

Signed-off-by: Heiko Schocher 
Acked-by: Ben Warren

mflash: Initial mflash support

2009-04-03T21:47:06+00:00

Mflash is fusion memory device mainly targeted consumer eletronic and
mobile phone.
Internally, it have nand flash and other hardware logics and supports
some different operation (ATA, IO, XIP) modes.

IO mode is custom mode for the host that doesn't have IDE interface.
(Many mobile targeted SoC doesn't have IDE bus)

This driver support mflash IO mode.

Followings are brief descriptions about IO mode.

1. IO mode based on ATA protocol and uses some custom command. (read
   confirm, write confirm)
2. IO mode uses SRAM bus interface.

Signed-off-by: unsik Kim

nvedit: do not update global bi_enetaddr and do not call eth_set_enetaddr()

2009-03-20T21:39:10+00:00

Since the ethernet layer handles updating of device addresses itself from
the environment, there is no point in calling eth_set_enetaddr().

Signed-off-by: Mike Frysinger 
CC: Ben Warren

netloop: speed up NetLoop

2009-02-23T07:49:33+00:00

NetLoop polls every cycle with getenv some environment variables.
This is horribly slow, especially when the environment is big.

This patch reads only the environment variables in NetLoop,
when they were changed.

Also moved the init part of the NetLoop function in a seperate
function.

Signed-off-by: Heiko Schocher 
Signed-off-by: Ben Warren

rename CONFIG_CMD_ENV to CONFIG_CMD_SAVEENV

2009-02-17T23:47:43+00:00

The CONFIG_CMD_ENV option controls enablement of the `saveenv` command
rather than a generic "env" command, or anything else related to the
environment.  So, let's make sure the define is named accordingly.

Signed-off-by: Mike Frysinger

Command usage cleanup

2009-01-28T07:49:52+00:00

Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser

Standardize command usage messages with cmd_usage()

2009-01-28T07:43:45+00:00

Signed-off-by: Peter Tyser

saveenv: standardize enablement

2009-01-27T21:30:42+00:00

Rather than special casing each environment type for enabling the saveenv
command, have them all behave the same.  This avoids bitrot as new env
sources are added/removed.

Signed-off-by: Mike Frysinger

IOMUX: Add console multiplexing support.

2008-12-07T00:23:35+00:00

Modifications to support console multiplexing.  This is controlled using
CONFIG_SYS_CONSOLE_MUX in the board configuration file.

This allows a user to specify multiple console devices in the environment
with a command like this: setenv stdin serial,nc.  As a result, the user can
enter text on both the serial and netconsole interfaces.

All devices - stdin, stdout and stderr - can be set in this manner.

1) common/iomux.c and include/iomux.h contain the environment setting
implementation.
2) doc/README.iomux contains a somewhat more detailed description.
3) The implementation in (1) is called from common/cmd_nvedit.c to
handle setenv and from common/console.c to handle initialization of
input/output devices at boot time.
4) common/console.c also contains the code needed to poll multiple console
devices for input and send output to all devices registered for output.
5) include/common.h includes iomux.h and common/Makefile generates iomux.o
when CONFIG_SYS_CONSOLE_MUX is set.

Signed-off-by: Gary Jennejohn

rename CFG_ macros to CONFIG_SYS

2008-10-18T19:54:03+00:00

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD