u-boot.git/common/cmd_nvedit.c, branch v2012.07

Block: Remove MG DISK support

2012-06-21T18:53:09+00:00

This driver is unused and obsolete.

Signed-off-by: Marek Vasut 
Cc: Wolfgang Denk 
Cc: unsik Kim

common/cmd_nvedit.c: Fix GCC 4.6 warning

2012-05-22T08:15:10+00:00

cmd_nvedit.c: In function '_do_env_set':
cmd_nvedit.c:207:9: warning: unused variable 'bd' [-Wunused-variable]

Signed-off-by: Anatolij Gustschin

net: punt bd->bi_ip_addr

2012-05-15T22:32:05+00:00

This field gets read in one place (by "bdinfo"), and we can replace
that with getenv("ipaddr").  After all, the bi_ip_addr field is kept
up-to-date implicitly with the value of the ipaddr env var.

Signed-off-by: Mike Frysinger 
Reviewed-by: Joe Hershberger

powerpc/corenet_ds: Slave reads ENV from master when boot from SRIO

2012-04-25T04:58:33+00:00

When boot from SRIO, slave's ENV can be stored in master's memory space,
then slave can fetch the ENV through SRIO interface.

NOTE: Because the slave can not erase, write master's NOR flash by SRIO
	  interface, so it can not modify the ENV parameters stored in
	  master's NOR flash using "saveenv" or other commands.

Master needs to:
	1. Put the slave's ENV into it's own memory space.
	2. Set an inbound SRIO window covered slave's ENV stored in master's
	   memory space.
Slave needs to:
	1. Set a specific TLB entry in order to fetch ucode and ENV from master.
	2. Set a LAW entry with the TargetID SRIO1 or SRIO2 for ucode and ENV.

Signed-off-by: Liu Gang 
Signed-off-by: Shaohui Xie

Add support for loading and saving the environment to a FAT partition

2012-03-30T20:38:14+00:00

The following must be defined:

CONFIG_ENV_IS_IN_FAT
	Enable this saving environment to FAT.

FAT_ENV_INTERFACE
	Interface the FAT resides on (e.g. mmc).

FAT_ENV_DEVICE
	The interface device number (e.g. 0 for mmc0)

FAT_ENV_PART
	The device part (e.g. 1 for mmc0:1)

FAT_ENV_FILE
	The filename of the environment file.

Author:    Maximilian Schwerin 

Removed dead DEBUG comment.
Signed-off-by: Wolfgang Denk

Convert cmd_usage() calls in common to use a return value

2012-03-06T20:09:46+00:00

Change all files in common/ to use CMD_RET_USAGE instead of calling
cmd_usage() directly. I'm not completely sure about this patch since
the code since impact is small (100 byte or so on ARM) and it might
need splitting into smaller patches. But for now here it is.

Signed-off-by: Simon Glass

common: add possibility for readline_into_buffer timeout

2012-02-12T09:11:23+00:00

add possibility to add a timeout when reading a line
into a buffer.

Signed-off-by: Heiko Schocher 
Cc: Mike Frysinger 
Acked-by: Mike Frysinger

common/cmd_nvedit.c: Fix size calculation in do_env_import()

2011-12-19T09:19:34+00:00

do_env_import() missed the final '\0' terminator when calculating the
size of an environment data block.  This led to an erroneous 'bad CRC,
import failed' message for a checksum protected environment (-c.)

Signed-off-by: Horst Kronstorfer

common/cmd_nvedit.c: Add missing 'env save' preproc guard

2011-12-12T07:25:38+00:00

Signed-off-by: Horst Kronstorfer

cmd_nvedit.c: Fix compiler warning introduced by checkpatch cleanup

2011-11-27T14:46:10+00:00

cmd_nvedit.c: In function 'do_env_grep':
cmd_nvedit.c:182:3: warning: suggest parentheses around assignment used as truth value

Signed-off-by: Kumar Gala 
Acked-by: Mike Frysinger 
Acked-by: Igor Grinberg