u-boot.git/common/cmd_spi.c, branch master

Move all command code into its own directory

2016-01-25T15:39:43+00:00

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Reviewed-by: Heiko Schocher 
Acked-by: Stefan Roese 
Acked-by: Przemyslaw Marczak

dm: spi: Adjust cmd_spi to work with driver model

2014-10-22T16:36:47+00:00

Driver model uses a different way to find the SPI bus and slave from the
numbered devices given on the command line. Adjust the code to suit.

We use a generic SPI device, and attach it to the SPI bus before performing
the transaction.

Signed-off-by: Simon Glass 
Reviewed-by: Jagannadha Sutradharudu Teki

dm: spi: Move cmd device code into its own function

2014-09-26T21:01:13+00:00

In preparation for changing the error handling in this code for driver
model, move it into its own function.

Reviewed-by: Jagannadha Sutradharudu Teki 
Signed-off-by: Simon Glass

Add GPL-2.0+ SPDX-License-Identifier to source files

2013-07-24T13:44:38+00:00

Signed-off-by: Wolfgang Denk 
[trini: Fixup common/cmd_io.c]
Signed-off-by: Tom Rini

cmd_spi: remove superfluous semicolon

2012-08-10T00:41:32+00:00

Reported-by: James Miller 
Signed-off-by: Marek Vasut 
Signed-off-by: Mike Frysinger

sspi: add options to specify bus and mode

2010-10-07T00:50:38+00:00

and clean up error messages and help,
removed pointless debug() call.

Signed-off-by: Reinhard Meyer 
Signed-off-by: Mike Frysinger

Make sure that argv[] argument pointers are not modified.

2010-07-04T21:55:42+00:00

The hush shell dynamically allocates (and re-allocates) memory for the
argument strings in the "char *argv[]" argument vector passed to
commands.  Any code that modifies these pointers will cause serious
corruption of the malloc data structures and crash U-Boot, so make
sure the compiler can check that no such modifications are being done
by changing the code into "char * const argv[]".

This modification is the result of debugging a strange crash caused
after adding a new command, which used the following argument
processing code which has been working perfectly fine in all Unix
systems since version 6 - but not so in U-Boot:

int main (int argc, char **argv)
{
	while (--argc > 0 && **++argv == '-') {
/* ====> */	while (*++*argv) {
			switch (**argv) {
			case 'd':
				debug++;
				break;
			...
			default:
				usage ();
			}
		}
	}
	...
}

The line marked "====>" will corrupt the malloc data structures and
usually cause U-Boot to crash when the next command gets executed by
the shell.  With the modification, the compiler will prevent this with
an
	error: increment of read-only location '*argv'

N.B.: The code above can be trivially rewritten like this:

	while (--argc > 0 && **++argv == '-') {
		char *arg = *argv;
		while (*++arg) {
			switch (*arg) {
			...

Signed-off-by: Wolfgang Denk 
Acked-by: Mike Frysinger

General help message cleanup

2009-06-12T18:47:16+00:00

Many of the help messages were not really helpful; for example, many
commands that take no arguments would not print a correct synopsis
line, but "No additional help available." which is not exactly wrong,
but not helpful either.

Commit ``Make "usage" messages more helpful.'' changed this
partially. But it also became clear that lots of "Usage" and "Help"
messages (fields "usage" and "help" in struct cmd_tbl_s respective)
were actually redundant.

This patch cleans this up - for example:

Before:
	=> help dtt
	dtt - Digital Thermometer and Thermostat

	Usage:
	dtt         - Read temperature from digital thermometer and thermostat.

After:
	=> help dtt
	dtt - Read temperature from Digital Thermometer and Thermostat

	Usage:
	dtt

Signed-off-by: Wolfgang Denk

Command usage cleanup

2009-01-28T07:49:52+00:00

Remove command name from all command "usage" fields and update
common/command.c to display "name - usage" instead of
just "usage". Also remove newlines from command usage fields.

Signed-off-by: Peter Tyser

cmd_spi: remove broken signed casting for display

2008-10-14T12:19:34+00:00

Since we're working with unsigned data, you can't apply a signed pointer
cast and then attempt to print the result.  Otherwise you get wrong output
when the sign bit is set like "0xFF" incorrectly extended to "0xFFFFFFFF".

Signed-off-by: Mike Frysinger