u-boot.git/common/cmd_usb.c, branch master

Move all command code into its own directory

2016-01-25T15:39:43+00:00

There are a lot of unrelated files in common, including all of the commands.
Moving them into their own directory makes them easier to find and is more
logical.

Some commands include non-command code, such as cmd_scsi.c. This should be
sorted out at some point so that the function can be enabled with or without
the associated command.

Unfortunately, with m68k I get this error:

m68k:  +   M5329AFEE
+arch/m68k/cpu/mcf532x/start.o: In function `_start':
+arch/m68k/cpu/mcf532x/start.S:159:(.text+0x452): relocation truncated to fit: R_68K_PC16 against symbol `board_init_f' defined in .text.board_init_f section in common/built-in.o

I hope someone can shed some light on what this means. I hope it isn't
depending on the position of code in the image.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng 
Reviewed-by: Heiko Schocher 
Acked-by: Stefan Roese 
Acked-by: Przemyslaw Marczak

block: pass block dev not num to read/write/erase()

2016-01-14T02:05:18+00:00

This will allow the implementation to make use of data in the block_dev
structure beyond the base device number. This will be useful so that eMMC
block devices can encompass the HW partition ID rather than treating this
out-of-band. Equally, the existence of the priv field is crying out for
this patch to exist.

Signed-off-by: Stephen Warren 
Reviewed-by: Tom Rini

usb: Refactor USB tree output code for testing

2015-11-20T03:27:51+00:00

Allow the 'usb tree' command to be used from test code, so that we can
verify that it works correctly.

Signed-off-by: Simon Glass

Move console definitions into a new console.h file

2015-11-20T03:27:50+00:00

The console includes a global variable and several functions that are only
used by a small subset of U-Boot files. Before adding more functions, move
the definitions into their own header file.

Signed-off-by: Simon Glass

dm: usb: Add support for USB keyboards with driver model

2015-11-20T03:13:39+00:00

Switch USB keyboards over to use driver model instead of scanning with the
horrible usb_get_dev_index() function. This involves creating a new uclass
for keyboards, although so far there is no API.

Signed-off-by: Simon Glass

dm: Rename dev_get_parentdata() to dev_get_parent_priv()

2015-10-23T15:42:28+00:00

The current name is inconsistent with other driver model data access
functions. Rename it and fix up all users.

Signed-off-by: Simon Glass 
Reviewed-by: Joe Hershberger

Move ALLOC_CACHE_ALIGN_BUFFER() to the new memalign.h header

2015-09-11T21:15:20+00:00

Now that we have a new header file for cache-aligned allocation, we should
move the stack-based allocation macro there also.

Signed-off-by: Simon Glass

dm: usb: fix USB Ethernet without CONFIG_DM_ETH regression

2015-08-06T02:57:50+00:00

The following commit enforces CONFIG_DM_ETH for USB Ethernet which
breaks any board using CONFIG_USB_HOST_ETHER without CONFIG_DM_ETH
which this patch fixes.

commit 69559093f6173dcfcb041df0995063bdbd07d49b
dm: usb: Avoid using USB ethernet with CONFIG_DM_USB and no DM_ETH

Tested on Colibri T20/T30 as well as Apalis T30 with
CONFIG_USB_HOST_ETHER and CONFIG_USB_ETHER_ASIX enabled and a LevelOne
USB-0301 ASIX AX88772 dongle.

Signed-off-by: Marcel Ziswiler 
Acked-by: Simon Glass

dm: usb: eth: Support driver model with USB Ethernet

2015-07-21T23:39:40+00:00

At present USB Ethernet does not work with CONFIG_DM_ETH. Add driver model
support to this feature, so that it can work alongside other Ethernet
devices with driver model.

It was found that quite a bit of code is common in most of the USB Ethernet
drivers. Add this code to the common layer to reduce the amount of duplicate
code needed in USB Ethernet drivers when CONFIG_DM_ETH is used.

Signed-off-by: Simon Glass 
Reviewed-by: Marek Vasut

dm: usb: Avoid using USB ethernet with CONFIG_DM_USB and no DM_ETH

2015-07-21T23:39:39+00:00

If driver model is used for Ethernet then USB Ethernet does not build. This
can be made to work with driver model is used for USB also. Add #ifdef logic
to make this clear when building.

Signed-off-by: Simon Glass 
Reviewed-by: Marek Vasut