u-boot.git/common/cmd_usb.c, branch origin

* Fix baudrate calculation problem on MPC5200 systems

2005-06-27T13:30:03+00:00

* Add MPC8220 boards to MAKEALL script

* Add EEPROM and RTC support for HMI1001 board

* Patch by Detlev Zundel, 20 Jun 2005:
  Fix initialization of low active GPIO pins on inka4x0 board

Fix problems with SNTP support;

2005-04-02T22:37:54+00:00

enable SNTP support in some boards.

Cleanup USB and partition defines

2005-02-24T23:23:29+00:00

Fix for incomplete byteorder fix in cmd_scsi.c and cmd_usb.c

2005-02-04T21:33:05+00:00

Fix byteorder problem in usbboot and scsiboot commands.

2005-02-04T15:38:08+00:00

* Removed '--no-warn-mismatch' option from Makefile. This option

2005-02-03T23:00:49+00:00

  makes 'ld' to overlook binary objects compatibility.

* Moved $(PLATFORM_LIBS) from the library group (--start-group ...
  --end-group) outside of the group. This will make 'ld' to do
  _multiple_ search in the library group when resolving symbol
  references and do only a _single_ seach in libgcc.a after the group
  search.

* Fix stability problems on CPC45 board again.

* Make image detection for diskboot / usbboot / scsiboot more robust
  (also check header checksum)

* Modify KUP4X board configuration to use SL811 driver for USB memory

2004-04-23T20:32:05+00:00

  sticks (including FAT / VFAT filesystem support)

* Add SL811 Host Controller Interface driver for USB

* Add CFG_I2C_EEPROM_ADDR_OVERFLOW desription to README

* Patch by Pantelis Antoniou, 19 Apr 2004:
  Allow to use shell style syntax (i. e. ${var} ) with standard parser.
  Minor patches for Intracom boards.

* Patch by Christian Pell, 19 Apr 2004:
  cleanup support for CF/IDE on PCMCIA for PXA25X

* Patches by David M�ller, 14 Nov 2003:

2003-12-07T18:32:37+00:00

  - board/mpl/common/common_util.c
    * implement support for BZIP2 compressed images
    * various cleanups (printf -> puts, ...)
  - board/mpl/common/flash.c
    * report correct errors to upper layers
    * check the erase fail and VPP low bits in status reg
  - board/mpl/vcma9/cmd_vcma9.c
  - board/mpl/vcma9/flash.c
    * various cleanups (printf -> puts, ...)
  - common/cmd_usb.c
    * fix typo in comment
  - cpu/arm920t/usb_ohci.c
    * support for S3C2410 is missing in #if line
  - drivers/cs8900.c
    * reinit some registers in case of error (cable missing, ...)
  - fs/fat/fat.c
    * support for USB/MMC devices is missing in #if line
  - include/configs/MIP405.h
  - include/configs/PIP405.h
    * enable BZIP2 support
    * enlarge malloc space to 1MiB because of BZIP2 support
  - include/configs/VCMA9.h
    * enable BZIP2 support
    * enlarge malloc space to 1MiB because of BZIP2 support
    * enable USB support
  - lib_arm/armlinux.c
    * change calling convention of ARM Linux kernel as
      described on http://www.arm.linux.org.uk/developer/booting.php

* Patch by Thomas Lange, 14 Nov 2003:
  Split dbau1x00 into dbau1000, dbau1100 and dbau1500 configs to
  support all these AMD boards.

* Patch by Thomas Lange, 14 Nov 2003:
  Workaround for mips au1x00 physical memory accesses (the au1x00
  uses a 36 bit bus internally and cannot access physical memory
  directly. Use the uncached SDRAM address instead of the physical
  one.)

Patch by Kenneth Johansson, 30 Jun 2003:

2003-07-01T21:06:45+00:00

get rid of MK_CMD_ENTRY macro; update doc/README.command

Fix some missing commands, cleanup header files

2003-06-29T21:03:46+00:00

(autoscript, bmp, bsp, fat, mmc, nand, portio, ...)