u-boot.git/common/image.c, branch v2018.03

libfdt: move headers to and

2018-03-05T15:16:28+00:00

Thomas reported U-Boot failed to build host tools if libfdt-devel
package is installed because tools include libfdt headers from
/usr/include/ instead of using internal ones.

This commit moves the header code:
  include/libfdt.h         -> include/linux/libfdt.h
  include/libfdt_env.h     -> include/linux/libfdt_env.h

and replaces include directives:
  #include       -> #include 
  #include   -> #include 

Reported-by: Thomas Petazzoni 
Signed-off-by: Masahiro Yamada

common: image.c: Fix CACHE: Misaligned operation output

2017-12-18T18:06:30+00:00

When booting a itb file with a Ramdisk on a imx6 based
board, U-Boot drops the warning:

Loading Kernel Image ... OK
Loading Ramdisk to 4ecf1000, end 4ef8b11f ... \
CACHE: Misaligned operation at range [4ecf1000,  4ef8b11f]

Fix it!

Signed-off-by: Heiko Schocher 
Tested-by: Ayoub Zaki

fpga: allow programming fpga from FIT image for all FPGA drivers

2017-12-14T15:09:39+00:00

This drops the limit that fpga is only loaded from FIT images for Xilinx.
This is done by moving the 'partial' check from 'common/image.c' to
'drivers/fpga/xilinx.c' (the only driver supporting partial images yet)
and supplies a weak default implementation in 'drivers/fpga/fpga.c'.

Signed-off-by: Simon Goldschmidt 
Tested-by: Michal Simek  (On zcu102)
Signed-off-by: Michal Simek

Drop the log buffer

2017-12-07T20:17:00+00:00

This does not appear to be used by any boards. Before introducing a new
log system, remove this old one.

Signed-off-by: Simon Glass 
Reviewed-by: Bin Meng

image: add IH_OS_ARM_TRUSTED_FIRMWARE for ARM Trusted Firmware

2017-11-25T23:39:06+00:00

To boot on ARMv8 systems with ARM Trusted Firmware, we need to
assemble an ATF-specific parameter structure and also provide the
address of the images started by ATF (e.g. BL3-3, which may be the
full U-Boot).

To allow us to identify an ARM Trusted Firmware contained in a FIT
image, this adds the necessary definitions.

Signed-off-by: Philipp Tomsich 
Reviewed-by: Simon Glass

common: Remove genimg_get_image()

2017-10-16T13:42:51+00:00

Removal of the legacy DataFlash code turned genimg_get_image() into a
no-op. Drop all calls to it and the function itself.

Signed-off-by: Tuomas Tynkkynen

Drop CONFIG_HAS_DATAFLASH

2017-10-16T13:42:51+00:00

Last user of this option went away in commit:

fdc7718999 ("board: usb_a9263: Update to support DT and DM")

Signed-off-by: Tuomas Tynkkynen

image: Add TI PMMC image type

2017-09-12T21:58:02+00:00

Add a new image type representing TI Power Management
Micro-Controller (PMMC) Firmware image type.

Signed-off-by: Andrew F. Davis

env: Rename some other getenv()-related functions

2017-08-16T12:31:11+00:00

We are now using an env_ prefix for environment functions. Rename these
other functions as well, for consistency:

   getenv_vlan()
   getenv_bootm_size()
   getenv_bootm_low()
   getenv_bootm_mapsize()
   env_get_default()

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass

env: Rename getenv/_f() to env_get()

2017-08-16T12:30:24+00:00

We are now using an env_ prefix for environment functions. Rename these
two functions for consistency. Also add function comments in common.h.

Quite a few places use getenv() in a condition context, provoking a
warning from checkpatch. These are fixed up in this patch also.

Suggested-by: Wolfgang Denk 
Signed-off-by: Simon Glass