u-boot.git/common/image.c, branch v2020.01

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58+00:00

These functions are CPU-related and do not use driver model. Move them to
cpu_func.h

Signed-off-by: Simon Glass 
Reviewed-by: Daniel Schwierzeck 
Reviewed-by: Tom Rini

common: Add a new lz4.h header file

2019-12-02T23:23:11+00:00

Add a header file to house the lz4 compression function. Add a comment
while we are here, since it not even clear from the name what the function
actuall does.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

crc32: Use the crc.h header for crc functions

2019-12-02T23:23:08+00:00

Drop inclusion of crc.h in common.h and use the correct header directly
instead.

With this we can drop the conflicting definition in fw_env.h and rely on
the crc.h header, which is already included.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

Merge tag 'xilinx-for-v2020.01' of https://gitlab.denx.de/u-boot/custodians/u-boot-microblaze

2019-10-09T20:22:03+00:00

Xilinx/FPGA changes for v2020.01

FPGA:
- Enable fpga loading on Versal
- Minor fix

Microblaze:
- Fix LMB configurations to support initrds
- Some other cleanups

Zynq:
- Minor config/dt changes
- Add distro boot support for usb1 and mmc1
- Remove Xilinx private boot commands and use only distro boot

ZynqMP:
- Kconfig cleanups, defconfig updates
- Update some dt files
- Add firmware driver for talking to PMUFW
- Extend distro boot support for jtag
- Add new IDs
- Add system controller configurations
- Convert code to talk firmware via mailbox or SMCs

Versal:
- Add board_late_init()
- Add run time DT memory setup
- Add DFU support
- Extend distro boot support for jtag and dfu
- Add clock driver
- Tune mini configurations

Xilinx:
- Improve documentation (boot scripts, dt binding)
- Enable run time initrd_high calculation
- Define default SYS_PROMPT
- Add zynq/zynqmp virtual defconfig

Drivers:
- Add Xilinx mailbox driver for talking to firmware
- Clean zynq_gem for Versal
- Move ZYNQ_HISPD_BROKEN to Kconfig
- Wire genphy_init() in phy.c
- Add Xilinx gii2rgmii bridge
- Cleanup zynq_sdhci
- dwc3 fix
- zynq_gpio fix
- axi_emac fix

Others:
- apalis-tk1 - clean config file

imx: Kconfig: Reduce default CONFIG_CSF_SIZE

2019-10-08T14:36:36+00:00

The default CSF_SIZE defined in Kconfig is too high and SPL cannot
fit into the OCRAM in certain cases.

The CSF cannot achieve 0x2000 length when using RSA 4K key which is
the largest key size supported by HABv4.

According to AN12056 "Encrypted Boot on HABv4 and CAAM Enabled Devices"
it's recommended to pad CSF binary to 0x2000 and append DEK blob to
deploy encrypted boot images.

As the maximum DEK blob size is 0x58 we can reduce CSF_SIZE to 0x2060
which should cover both CSF and DEK blob length.

Update default_image.c and image.c to align with this change and avoid
a U-Boot proper authentication failure in HAB closed devices:

Authenticate image from DDR location 0x877fffc0...
bad magic magic=0x32 length=0x6131 version=0x38
bad length magic=0x32 length=0x6131 version=0x38
bad version magic=0x32 length=0x6131 version=0x38
spl: ERROR:  image authentication fail

Fixes: 96d27fb218 (Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets")

Reported-by: Jagan Teki 
Signed-off-by: Breno Lima

Revert "habv4: tools: Avoid hardcoded CSF size for SPL targets"

2019-10-08T14:35:59+00:00

This reverts commit 62a52f3f85bf33e286632e99f0d39b2c166af0c4.

habv4: tools: Avoid hardcoded CSF size for SPL targets

2019-10-08T14:35:59+00:00

Currently it's not possible to authenticate the U-Boot proper of
mx6ul_14x14_evk_defconfig target:

Authenticate image from DDR location 0x877fffc0...
bad magic magic=0x0 length=0x00 version=0x3
bad length magic=0x0 length=0x00 version=0x3
bad version magic=0x0 length=0x00 version=0x3
spl: ERROR:  image authentication fail

Commit 0633e134784a ("imx: hab: Increase CSF_SIZE for i.MX6 and
i.MX7 devices") has increased CSF_SIZE to avoid a possible issue
when booting encrypted boot images.

Commit d21bd69b6e95 ("tools: mkimage: add firmware-ivt image type
for HAB verification") is hardcoding the CSF and IVT sizes, the
new CSF size is not being considered and u-boot-ivt.img fails to
boot.

Avoid hardcoded CSF and IVT size to fix this issue.

Signed-off-by: Breno Lima 
Reviewed-by: Fabio Estevam

microblaze: Fix lmb memory initialization

2019-10-08T07:55:11+00:00

Microblaze as Arm is using multiple memory banks which are read from DT
that's why there is a need to initialized LMB based on bd->bi_dram[].
Without this fix memory base/size is all the time 0 and image relocation is
not possible.

Signed-off-by: Michal Simek

image: add new "copro" image type

2019-08-27T09:19:23+00:00

Define new image type for coprocessor images.
It is used in FIT to identify the files loaded
with remoteproc command (elf or bin).

Signed-off-by: Loic Pallardy 
Signed-off-by: Patrick Delaunay 
Reviewed-by: Simon Glass

spl: support booting via RISC-V OpenSBI

2019-08-26T08:07:42+00:00

RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor
Binary Interface (SBI) specification. It is required by Linux and U-Boot
running in supervisor mode. This patch adds support for booting via the
OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher.

In this configuration, U-Boot SPL starts in machine mode. After loading
OpenSBI and U-Boot proper, it will start OpenSBI. All necessary
parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot
proper is started in supervisor mode by OpenSBI. Support for OpenSBI is
enabled with CONFIG_SPL_OPENSBI. An additional configuration entry,
CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the
OpenSBI firmware binary. It is not used directly in U-Boot and instead
is intended to make the value available to scripts such as FIT
configuration generators.

The header file include/opensbi.h is based on header files from the
OpenSBI project. They are recent, as of commit bae54f764570 ("firmware:
Add fw_dynamic firmware").

Signed-off-by: Lukas Auer 
Reviewed-by: Bin Meng 
Tested-by: Bin Meng 
Reviewed-by: Anup Patel