The code is guarded by a condition none of the defconfigs meet (that is
CONFIG_SYS_FAULT_ECHO_LINK_DOWN and CONFIG_LED_STATUS_RED both enabled),
so we can remove the unreachable code sections.

When doing that, there's no caller for miiphy_link anymore, so it can be
removed.

This in turns makes CONFIG_SYS_FAULT_ECHO_LINK_DOWN and
CONFIG_SYS_FAULT_MII_ADDR unused so they are removed as well.

Signed-off-by: Quentin Schulz <quentin.schulz@cherry.de>
Reviewed-by: Tom Rini <trini@konsulko.com>

Inline mdio_init() back into mdio_alloc(), separate
access to mdio_init() is no longer necessary.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>

This uses Heinrich's merge of lib/efi_loader/efi_net.c which results in
no changes.

When enabling net console and console multiplexing, a boot crash was
observed using mtk_eth driver with stdin/stdout set to "serial,nc"
in persistent environment:

> CPU:   MediaTek MT7981
> Model: OpenWrt One
> DRAM:  1 GiB
> Core:  35 devices, 15 uclasses, devicetree: separate
> spi-nand: spi_nand spi_nand@0: Winbond SPI NAND was found.
> spi-nand: spi_nand spi_nand@0: 128 MiB, block size: 128 KiB, page size: 2048, OOB size: 64
> Loading Environment from UBI... SF: Detected w25q128 with page size 256 Bytes, erase size 4 KiB, total 16 MiB
> mtd: partition "ubi" extends beyond the end of device "spi-nand0" -- size truncated to 0x7f00000
> Read 126976 bytes from volume ubootenv to 000000007f7bf0c0
> Read 126976 bytes from volume ubootenv2 to 000000007f7de100
> OK
> "Synchronous Abort" handler, esr 0x96000004, far 0xeafffffeea000018
> elr: 0000000041e63cd4 lr : 0000000041e1b844 (reloc)
> elr: 000000007ff9ecd4 lr : 000000007ff56844
> x0 : eafffffeea000018 x1 : 000000007fb552e0
> x2 : 00000000000000fe x3 : 0000000000000000

The cause is that "serial,nc" forced the console subsystem to
initialize the ethernet driver before ethernet subsystem
initialization (console_init_r() is called before initr_net()).

During the mtk_eth driver initialization, mdio_register() will be
called, and miiphy_get_dev_by_name() will then be called.

The miiphy_get_dev_by_name() will check the list "mii_devs" to see
if the passed device name exists. However the mii_devs is defined
without initialization:
> static struct list_head mii_devs;
and the actual initialization is done in the following chain:
initr_net -> eth_initialize -> eth_common_init -> miiphy_init
Since initr_net() hasn't be called, iterating over the mii_devs
will access to physical address 0 (mii_devs.next == NULL) and will
cause the crash.

The fix is to define mii_devs using:
> static LIST_HEAD(mii_devs);

As the "current_mii" is defined as a static variable, it will
always be NULL in board_r stage and initializing it will NULL is
unnecessary. So the entire miiphy_init() can be remove.

Signed-off-by: Weijie Gao <hackpascal@gmail.com>

Introduce mdio_init() split off from mdio_alloc(), which is used
to initialize already allocated struct mii_dev.

Reviewed-by: Paul Barker <paul.barker.ct@bp.renesas.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman <jonas@kwiboo.se>
Signed-off-by: Tom Rini <trini@konsulko.com>

Remove <common.h> from all "commmon/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini <trini@konsulko.com>

This converts the following to Kconfig:
   CONFIG_PHY_RESET_DELAY

Cc: Ramon Fried <rfried.dev@gmail.com>
Signed-off-by: Tom Rini <trini@konsulko.com>

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass <sjg@chromium.org>