u-boot.git/common/serial.c, branch v2009.01 Unnamed repository; edit this file 'description' to name the repository. rename CFG_ macros to CONFIG_SYS 2008-10-18T19:54:03+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2008-10-16T13:01:15+00:00 6d0f6bcf337c5261c08fabe12982178c2c489d76 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
ARM: s3c24xx: Multiple serial port support 2008-02-04T22:52:49+00:00 Harald Welte laforge@openmoko.org 2007-12-19T13:24:40+00:00 a7c185ed3d9f8ebd85cfc286e1ffee72e4803163 This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's Signed-off-by: Harald Welte <laforge@openmoko.org> 
This patch adds support for CONFIG_SERIAL_MULTI on s3c24x0 CPU's

Signed-off-by: Harald Welte <laforge@openmoko.org>
serial: Make default_serial_console() a weak function 2008-01-09T12:27:39+00:00 Matthias Fuchs matthias.fuchs@esd-electronics.com 2007-12-27T15:57:23+00:00 1208a2dfde02bedd3c5bda29a606632b8e0be058 With this patch it is possible to reimplement default_serial_console() in board specific code. This will be done in the upcomming PMC440 U-Boot port. This also allows the lwmon board maintainer to remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c. Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com> 
With this patch it is possible to reimplement default_serial_console()
in board specific code. This will be done in the upcomming PMC440
U-Boot port. This also allows the lwmon board maintainer to
remove the '#if !defined(CONFIG_LWMON) ...' from common/serial.c.

Signed-off-by: Matthias Fuchs <matthias.fuchs@esd-electronics.com>
ppc4xx: Add PPC405EX support 2007-10-31T20:20:49+00:00 Stefan Roese sr@denx.de 2007-10-05T15:10:59+00:00 dbbd125721aea6645fdb962f36bd41f59e272f9d Signed-off-by: Stefan Roese <sr@denx.de> 
Signed-off-by: Stefan Roese <sr@denx.de>
PXA270: Add support for multiple serial ports. 2007-09-06T23:04:59+00:00 stefano babic sbabic@denx.de 2007-08-30T20:57:04+00:00 80172c6181c912fbb34ea3ba0c22b232b419b47f This patch adds support for multiple serial ports to the PXA target. FFUART, BTUART and STUART are supported. Signed-off-by: Stefano Babic <sbabic@denx.de> 
This patch adds support for multiple serial ports to the PXA target.
FFUART, BTUART and STUART are supported.

Signed-off-by: Stefano Babic <sbabic@denx.de>
[PATCH] Clean up 40EZ/Acadia support 2007-03-24T14:45:34+00:00 Stefan Roese sr@denx.de 2007-03-24T14:45:34+00:00 3cb86f3e40d2a80356177434a99f75bc8baa9caf This patch cleans up all the open issue of the preliminary Acadia support. Signed-off-by: Stefan Roese <sr@denx.de> 
This patch cleans up all the open issue of the preliminary
Acadia support.

Signed-off-by: Stefan Roese <sr@denx.de>
Make the serial driver framework work with CONFIG_SERIAL_MULTI enabled 2006-08-30T21:02:10+00:00 Wolfgang Denk wd@pollux.denx.de 2006-08-30T21:02:10+00:00 0fd30252c840ee54d2a80475d6504766d43b8add 






Merge: Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30T16:19:42+00:00

Marian Balakowicz
m8@semihalf.com

2006-06-30T16:19:42+00:00

f6e5739a68131998a5ae8aa0cf56a0316f810200












Add support for AMCC 440SPe CPU based eval board (Yucca).
2006-06-30T14:30:46+00:00

Marian Balakowicz
m8@semihalf.com

2006-06-30T14:30:46+00:00

6c5879f380be38d85fef0d3aba3353358f4b2ff4












Add support for CONFIG_SERIAL_MULTI on MPC5xxx
2006-06-16T15:04:45+00:00

Wolfgang Denk
wd@fifi.denx.de

2006-06-16T15:04:45+00:00

c12cffc543df621c162ba26e012c7f4ab0af496e

Patch by Martin Krause, 8 Jun 2006

This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.





Patch by Martin Krause, 8 Jun 2006

This patch supports two serial consoles on boards with
a MPC5xxx CPU. The console can be switched at runtime
by setting stdin, stdout and stderr to the desired serial
interface (serial0 or serial1). The PSCs to be used as
console port are definded by CONFIG_PSC_CONSOLE
and CONFIG_PSC_CONSOLE2.
See README.serial_multi for details.