u-boot.git/common/spl/Kconfig, branch v2020.07

sifive: fu540: Add U-Boot proper sector start

2020-06-04T01:44:09Z

Add U-Boot proper sector start offset for SiFive FU540. This value is based on the partition layout supported by SiFive FU540. u-boot.itb need to write on this specific offset so-that the SPL will retrieve it from here and load. Signed-off-by: Jagan Teki Reviewed-by: Bin Meng Reviewed-by: Pragnesh Patel

rename symbol: CONFIG_TEGRA -> CONFIG_ARCH_TEGRA

2020-05-15T18:47:35Z

Have this symbol follow the pattern of all other such symbols. Signed-off-by: Trevor Woerner

spl: sdp: Add CONFIG_SPL_SDP_USB_DEV for USB device

2020-05-03T13:31:41Z

Add a new configuration CONFIG_SPL_SDP_USB_DEV to specify the usb index for spl sdp driver, so that we change use different device. The default value is 0. Signed-off-by: Ye Li Signed-off-by: Peng Fan

Revert "imx: Introduce CONFIG_SPL_FORCE_MMC_BOOT to force MMC boot on falcon mode"

2020-05-01T16:47:07Z

The CONFIG_SPL_FORCE_MMC_BOOT config flag is not needed as its behavior is the correct one in all cases; using spl_boot_device() instead of the boot_device parameter will lead to inconsistency issues, for example, when a board_boot_order() is defined. In fact, this is the reason the parameter was introduced in the first place, in commit 2b1cdafa9fdd ("common: Pass the boot device into spl_boot_mode()"). This reverts commit 772b55723bcbe8ebe84f579d9cdc831d8e18579d. Link: https://lists.denx.de/pipermail/u-boot/2020-April/405979.html Signed-off-by: Harald Seiler

spl: Kconfig: de-dup SPL_DM_GPIO definition

2020-04-24T14:51:32Z

Two nearly concurrent commits (d4d65e112 and bcee8d676) added a SPL_DM_GPIO symbol. Resolve the duplication in favor of the version in drivers/gpio/Kconfig. Signed-off-by: Joel Johnson Reviewed-by: Frieder Schrempf

spl: Kconfig: Escape '$(ARCH)' in LDSCRIPT entries

2020-03-16T20:42:50Z

The default SPL / TPL linker script is in the $(ARCH) directory. The way we use this today works but isn't ideal. With an update to Kconfig to re-sync with the Linux Kernel, we need to escape the '$' here so that it will end up being evaluated by make. Cc: Masahiro Yamada Signed-off-by: Tom Rini Reviewed-by: Masahiro Yamada

sunxi: move CONFIG_SYS_SPI_U_BOOT_OFFS out of defconfig

2020-01-24T17:36:56Z

For Allwinner SoCs the CONFIG_SYS_SPI_U_BOOT_OFFS value is not really a board choice: The boot ROM only loads the SPL from offset 0 of the SPI NOR flash, and loads at most 32KB. This is a similar situation as on MMC, so consequently we create our "joint" image (SPL + U-Boot proper) with that 32KB offset during the build. So define the value of this symbol to be 32KB by default for every Allwinner SoC. This removes the definition of this symbol from the _defconfig files, and avoids every board to define this over and over again. Signed-off-by: Andre Przywara Reviewed-by: Jagan Teki

Merge https://gitlab.denx.de/u-boot/custodians/u-boot-marvell

2020-01-16T17:52:07Z

- Clearfog: Fix SD booting (Baruch) - Misc updates to MMC handling in SPL to support booting from main data partition (vs hardware boot partition) on MVEBU (Baruch)

spl: mmc: support uboot image offset on main partition

2020-01-16T09:58:52Z

On Armada 38x platforms the ROM code loads SPL from offset 0 of eMMC hardware boot partitions. When there are no boot partitions (i.e. SD card) the ROM skips the first sector that usually contains the (logical) partition table. Since the generated .kwb image contains the main U-Boot image in a fixed location (0x140 sectors by default), we end up with the main U-Boot image in offset of 1 sector. The current workaround is to manually set CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR to 0x141 to compensate for that. This patch uses the run-time detected boot partition to determine the right offset of the main U-Boot partition. The generated .kwb image is now compatible with both eMMC boot partition, and SD card main data partition. Signed-off-by: Baruch Siach Reviewed-by: Stefan Roese Signed-off-by: Stefan Roese

Kconfig: Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA

2020-01-16T00:50:27Z

Rename CONFIG_SPL_DMA_SUPPORT to CONFIG_SPL_DMA. This allows to use macros such as CONFIG_IS_ENABLED() that allow conditional compilation of code for SPL and U-Boot. Signed-off-by: Vignesh Raghavendra Reviewed-by: Simon Glass