u-boot.git/common/spl/Makefile, branch v2017.07

SPL: Add XIP booting support

2017-06-09T15:23:59+00:00

Enable support for XIP (execute in place) of U-Boot or kernel image. There is
no need to copy image from flash to ram if flash supports execute in place.

Signed-off-by: Vikas Manocha 
Reviewed-by: Alexandru Gagniuc

spl: add support to booting with ATF

2017-05-15T14:38:09+00:00

ATF(ARM Trusted Firmware) is used by ARM arch64 SoCs, find more infomation
about ATF at: https://github.com/ARM-software/arm-trusted-firmware

SPL is considered as BL2 in ATF terminology, it needs to load other parts
of ATF binary like BL31, BL32, SCP-BL30, and BL33(U-Boot). And needs to
prepare the parameter for BL31 which including entry and image information
for all other images. Then the SPL handle PC to BL31 with the parameter,
the BL31 will do the rest of work and at last get into U-Boot(BL33).

This patch needs work with patches from Andre for SPL support multi
binary in FIT.

The entry point of bl31 and bl33 are still using hard code because we
still can not get them from the FIT image information.

Signed-off-by: Kever Yang 
Tested-by: Heiko Stuebner 
Acked-by: Simon Glass 
Reviewed-by: Tom Rini

spl: move RAM boot support in separate file

2017-01-14T21:46:26+00:00

Add a new top-level config option so support booting an image stored
in RAM. This allows to move the RAM boot support into a sparate file
and having a single condition to compile that file.

Signed-off-by: Stefan Agner

spl: spi: Move the generic SPI loader into common/spl

2016-10-06T19:07:33+00:00

All the other SPL loaders are in this directory, so move the SPI one in
there too.

There are two board-specific SPI loaders (fsl and sunxi). These remain in
the drivers/mtd/spi directory, since they do not contain generic code.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

spl: dfu: adding dfu support functions for SPL-DFU

2016-09-27T21:30:19+00:00

Adding support functions to run dfu spl commands.

Signed-off-by: Ravi Babu 
Reviewed-by: Tom Rini

spl: support loading from UBI volumes

2016-07-22T13:53:00+00:00

Add support for loading from UBI volumes on the top of NAND
and OneNAND.

Signed-off-by: Ladislav Michl 
Reviewed-by: Heiko Schocher

spl: Add an option to load a FIT containing U-Boot

2016-03-14T23:18:30+00:00

This provides a way to load a FIT containing U-Boot and a selection of device
tree files. The board can select the correct device tree by probing the
hardware. Then U-Boot is started with the selected device tree.

Signed-off-by: Simon Glass

spl: Add EXT support to SPL

2014-10-27T21:54:03+00:00

Add EXT filesystem support to SPL.

Signed-off-by: Guillaume GARDET 
[trini: Fix a warning and checkpatch problems]
Signed-off-by: Tom Rini

common: spl: Add spl sata boot support

2014-02-19T15:47:43+00:00

Add spl_sata to read a fat partition from a bootable SATA
drive.

Signed-off-by: Dan Murphy 
Reviewed-by: Roger Quadros

spl: common: Support for USB MSD FAT image loading

2014-01-24T21:59:22+00:00

Add SPL support to be able to detect a USB Mass Storage device
connected to a USB host.  Once a USB Mass storage device is detected
the SPL will load the u-boot.img from a FAT partition to target address.

Signed-off-by: Dan Murphy