u-boot.git/common/spl/spl_dfu.c, branch master

common: spl: spl_dfu.c: Fix warning associated with PCI subclass_code

2026-03-12T08:59:33+00:00

The subclass_code member of the pci_ep_header structure is a 1-byte
field. The macro PCI_CLASS_MEMORY_RAM is a concetation of baseclass_code
and subclass_code as follows:
	PCI_BASE_CLASS_MEMORY: 0x05
	Subclass Code for RAM: 0x00
	PCI_CLASS_MEMORY_RAM:  0x0500
Hence, instead of extracting it via an implicity type conversion from int
to u8 which throws a warning, explicitly mask the bits to extract the
subclass_code.

Fixes: cde77583cf0b ("spl: Add support for Device Firmware Upgrade (DFU) over PCIe")
Signed-off-by: Siddharth Vadapalli 
Tested-by: Anshul Dalal 
Reviewed-by: Mattijs Korpershoek 
Tested-by: Mattijs Korpershoek  # am62x_evm_a53
Link: https://lore.kernel.org/r/20260305103815.999886-1-s-vadapalli@ti.com
Signed-off-by: Mattijs Korpershoek

spl: Add support for Device Firmware Upgrade (DFU) over PCIe

2025-11-06T09:17:05+00:00

Introduces support for Device Firmware Upgrade (DFU) over PCIe in
U-Boot. Traditionally, the DFU protocol is used over USB, where a
device enters DFU mode and allows a host to upload firmware or binary
images directly via the USB interface. This is a widely adopted and
convenient method for updating firmware.

In the context of Texas Instruments (TI) SoCs, PCIe can be used as a
boot interface in a manner that differs from the conventional
"PCIe Boot" process, which typically refers to booting an OS or
firmware image from an NVMe SSD or other PCIe-attached storage devices.
Instead, TI SoCs can be configured as a PCIe Endpoint, allowing a
connected PCIe Root Complex (host) to transfer images directly into the
device’s memory over the PCIe bus for boot purposes. This mechanism is
analogous to DFU over USB, but leverages the high-speed PCIe link and
does not depend on traditional storage devices.

By extending the DFU framework in U-Boot to support PCIe, it will be
possible to flash images over PCIe. While this implementation is
motivated by TI SoC use cases, the framework is generic and can be
adopted by everyone for platforms that support PCIe Endpoint mode.
Platforms with hardware support for PCIe-based memory loading can use
this to implement PCIe as a boot mode, as well as to enable flashing
and recovery scenarios similar to DFU over USB.

In summary, enable support for:
- DFU-style flashing of firmware/images over PCIe, analogous to existing
USB DFU workflows
- PCIe as a boot mode where a host can load images directly into device
memory using DFU over PCIe

Signed-off-by: Hrushikesh Salunke 
Reviewed-by: Mattijs Korpershoek 
Link: https://lore.kernel.org/r/20251023080922.3527052-1-h-salunke@ti.com
Signed-off-by: Mattijs Korpershoek

Restore patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"

2024-05-20T19:35:03+00:00

As part of bringing the master branch back in to next, we need to allow
for all of these changes to exist here.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

Revert "Merge patch series "arm: dts: am62-beagleplay: Fix Beagleplay Ethernet""

2024-05-19T14:16:36+00:00

When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay
Ethernet"' I failed to notice that b4 noticed it was based on next and
so took that as the base commit and merged that part of next to master.

This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing
changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35.

Reported-by: Jonas Karlman 
Signed-off-by: Tom Rini

common: Remove and add needed includes

2024-05-06T21:05:04+00:00

Remove  from all "commmon/" files and when needed add
missing include files directly.

Signed-off-by: Tom Rini

common: Drop linux/printk.h from common header

2023-09-24T13:54:57+00:00

This old patch was marked as deferred. Bring it back to life, to continue
towards the removal of common.h

Move this out of the common header and include it only where needed.

Signed-off-by: Simon Glass

env: Drop environment.h header file where not needed

2019-08-11T20:43:41+00:00

This header file is now only used by files that access internal
environment features. Drop it from various places where it is not needed.

Acked-by: Joe Hershberger 
Signed-off-by: Simon Glass

env: Move get/set_default_env() to env.h

2019-08-11T20:43:41+00:00

Move these functions to the new header file and rename set_default_env()
to env_set_default() so that it has a consistent env_ prefix.

Acked-by: Joe Hershberger 
Signed-off-by: Simon Glass

env: Move env_set() to env.h

2019-08-11T20:43:41+00:00

Move env_set() over to the new header file.

Acked-by: Joe Hershberger 
Signed-off-by: Simon Glass

spl: dfu: Fix printed variable name

2019-06-14T10:39:50+00:00

The SPL DFU uses dfu_alt_info_N variable name to determine the DFU
configuration, where N is the name of the media (e.g. ram). It does
not use the plain dfu_alt_info. Print the name of the missing env
variable in case of a failure instead of printing dfu_alt_info,
which is just the name of the parameter passed to spl_dfu_cmd().

Signed-off-by: Marek Vasut 
Cc: Tom Rini