u-boot.git/common/spl/spl_opensbi.c, branch v2020.07

riscv: sbi: Add newline to error message

2020-07-02T02:02:57+00:00

Signed-off-by: Sean Anderson 
Reviewed-by: Atish Patra 
Reviewed-by: Bin Meng

common: Drop image.h from common header

2020-05-18T21:33:33+00:00

Move this uncommon header out of the common header.

Signed-off-by: Simon Glass

riscv: Introduce SPL_SMP Kconfig option for U-Boot SPL

2020-04-23T02:14:06+00:00

With SBI v0.2 HSM extension, only a single hart need to boot and
enter operating system. The booting hart can bring up secondary
harts one by one afterwards.

For U-Boot running in SPL, SMP can be turned on, while in U-Boot
proper, SMP can be optionally turned off if using SBI v0.2 HSM.

Introduce a new SPL_SMP Kconfig option to support this.

Signed-off-by: Bin Meng 
Reviewed-by: Atish Patra

common: Move hang() to the same header as panic()

2020-01-17T22:53:40+00:00

At present panic() is in the vsprintf.h header file. That does not seem
like an obvious choice for hang(), even though it relates to panic(). So
let's put hang() in its own header.

Signed-off-by: Simon Glass 
[trini: Migrate a few more files]
Signed-off-by: Tom Rini

spl: opensbi: wait for ack from secondary harts before entering OpenSBI

2019-12-10T00:23:10+00:00

At the start, OpenSBI relocates itself to its link address. If the link
address ranges of U-Boot SPL and OpenSBI overlap, the relocation can
lead to code corruption if a hart is still running U-Boot SPL during
relocation. To avoid this problem, the main hart is specified as the
preferred boot hart to perform the relocation. This fixes the code
corruption problems based on the assumption that since the main hart
schedules the secondary harts to enter OpenSBI, it will be the last to
enter OpenSBI. However it was reported that this assumption is not
always correct.

To make sure the assumption always holds true, wait for all secondary
harts to acknowledge the call-function request before entering OpenSBI
on the main hart.

Reported-by: Rick Chen 
Signed-off-by: Lukas Auer 
Reviewed-by: Rick Chen 
Tested-by: Rick Chen 
Reviewed-by: Anup Patel

riscv: add option to wait for ack from secondary harts in smp functions

2019-12-10T00:23:10+00:00

Add a wait option to smp_call_function() to wait for the secondary harts
to acknowledge the call-function request. The request is considered to
be acknowledged once each secondary hart has cleared the corresponding
IPI.

As part of the call-function request, the secondary harts invalidate the
instruction cache after clearing the IPI. This adds a delay between
acknowledgment (clear IPI) and fulfillment (call function) of the
request. We want to use the acknowledgment to be able to judge when the
request has been completed. Remove the delay by clearing the IPI after
cache invalidation and just before calling the function from the
request.

Signed-off-by: Lukas Auer 
Reviewed-by: Rick Chen 
Tested-by: Rick Chen 
Reviewed-by: Anup Patel

spl: opensbi: specify main hart as preferred boot hart

2019-12-10T00:23:10+00:00

OpenSBI uses a relocation lottery to determine the hart to relocate
OpenSBI to its link address. In the U-Boot SPL boot flow, the main hart
schedules the secondary harts to enter OpenSBI before doing so itself.
One of the secondary harts will therefore always be the winner of the
relocation lottery. This is problematic if the link address ranges of
OpenSBI and U-Boot SPL overlap. OpenSBI will be relocated and therefore
overwrite U-Boot SPL while some harts may still run it, leading to code
corruption.

Avoid this problem by specifying the main hart as the preferred boot
hart to perform the OpenSBI relocation. The main hart will be the last
hart to enter OpenSBI, relocation can therefore occur safely.

The boot hart field was added to version 2 of the OpenSBI FW_DYNAMIC
info structure. The header file include/opensbi.h is synchronized with
include/sbi/fw_dynamic.h from the OpenSBI project to update the info
structure. The header file is recent as of commit
7a13beb21326 ("firmware: Add preferred boot HART field in struct
fw_dynamic_info").

Reported-by: Rick Chen 
Suggested-by: Anup Patel 
Signed-off-by: Lukas Auer 
Reviewed-by: Rick Chen 
Tested-by: Rick Chen 
Reviewed-by: Anup Patel

common: Move ARM cache operations out of common.h

2019-12-02T23:24:58+00:00

These functions are CPU-related and do not use driver model. Move them to
cpu_func.h

Signed-off-by: Simon Glass 
Reviewed-by: Daniel Schwierzeck 
Reviewed-by: Tom Rini

spl: support booting via RISC-V OpenSBI

2019-08-26T08:07:42+00:00

RISC-V OpenSBI is an open-source implementation of the RISC-V Supervisor
Binary Interface (SBI) specification. It is required by Linux and U-Boot
running in supervisor mode. This patch adds support for booting via the
OpenSBI FW_DYNAMIC firmware. It supports OpenSBI version 0.4 and higher.

In this configuration, U-Boot SPL starts in machine mode. After loading
OpenSBI and U-Boot proper, it will start OpenSBI. All necessary
parameters are generated by U-Boot SPL and are passed to OpenSBI. U-Boot
proper is started in supervisor mode by OpenSBI. Support for OpenSBI is
enabled with CONFIG_SPL_OPENSBI. An additional configuration entry,
CONFIG_SPL_OPENSBI_LOAD_ADDR, is used to specify the load address of the
OpenSBI firmware binary. It is not used directly in U-Boot and instead
is intended to make the value available to scripts such as FIT
configuration generators.

The header file include/opensbi.h is based on header files from the
OpenSBI project. They are recent, as of commit bae54f764570 ("firmware:
Add fw_dynamic firmware").

Signed-off-by: Lukas Auer 
Reviewed-by: Bin Meng 
Tested-by: Bin Meng 
Reviewed-by: Anup Patel