u-boot.git/common/spl, branch v2013.04 Unnamed repository; edit this file 'description' to name the repository. SPL: ONENAND: Support SPL to boot u-boot from OneNAND. 2013-03-11T15:05:49+00:00 Enric Balletbo i Serra eballetbo@iseebcn.com 2013-02-07T23:14:48+00:00 6000992e265f507a18b0dcbcf2a89179822b42c4 This patch will allow use SPL to boot an u-boot from the OneNAND. Tested with IGEPv2 board with a OneNAND from Numonyx Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com> [trini: Add <spl.h> hunk to fix warning] Signed-off-by: Tom Rini <trini@ti.com> 
This patch will allow use SPL to boot an u-boot from the OneNAND.

Tested with IGEPv2 board with a OneNAND from Numonyx

Signed-off-by: Enric Balletbo i Serra <eballetbo@iseebcn.com>
[trini: Add <spl.h> hunk to fix warning]
Signed-off-by: Tom Rini <trini@ti.com>
spl: support for booting via usbeth 2013-02-18T18:48:04+00:00 Ilya Yanok ilya.yanok@cogentembedded.com 2013-02-05T11:36:24+00:00 62a814310e4794a1218d0057142cf57349924a1c In case of usbeth booting just call net_load_image("usb_ether"). This patch also adds CONFIG_SPL_USBETH_SUPPORT and CONFIG_SPL_MUSB_NEW_SUPPORT config options to enable linking of SPL against USB gagdet support and new MUSB driver resp. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com> 
In case of usbeth booting just call net_load_image("usb_ether").
This patch also adds CONFIG_SPL_USBETH_SUPPORT and
CONFIG_SPL_MUSB_NEW_SUPPORT config options to enable linking of SPL
against USB gagdet support and new MUSB driver resp.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
SPL: Port SPL framework to powerpc 2012-12-05T16:30:22+00:00 Stefan Roese sr@denx.de 2012-08-23T06:34:21+00:00 ea8256f072ccc04c83fa10030673cdd4cd01cbd9 This patch enables the SPL framework to be used on powerpc platforms and not only ARM. timer_init() does not exist on PPC systems. The timer (decrementer) is initialized and enabled in interrupt_init() here. And currently interrupt_init() is called after relocation to SDRAM. Since the only powerpc SPL implementation (a3m071) doesn't need a timer, let's remove this timer_init() call for PPC systems. Signed-off-by: Stefan Roese <sr@denx.de> 
This patch enables the SPL framework to be used on powerpc platforms
and not only ARM.

timer_init() does not exist on PPC systems. The timer (decrementer) is
initialized and enabled in interrupt_init() here. And currently
interrupt_init() is called after relocation to SDRAM. Since the only
powerpc SPL implementation (a3m071) doesn't need a timer, let's remove
this timer_init() call for PPC systems.

Signed-off-by: Stefan Roese <sr@denx.de>
SPL: make jump_to_image_no_args a weak symbol 2012-10-29T16:07:05+00:00 Allen Martin amartin@nvidia.com 2012-10-19T21:08:22+00:00 a759f1e0db7be05ab562e060cf024af262920426 Change jump_to_image_no_args() to a weak symbol to allow override by SoC specific code. This is required by tegra because the SPL runs on a different CPU from the image it is loading, so tegra specific initialization is required to start the host CPU. Pass in spl_image as a parameter for the same reason. Signed-off-by: Allen Martin <amartin@nvidia.com> Acked-by: Tom Rini <trini@ti.com> Acked-by: Simon Glass <sjg@chromium.org> Tested-by: Simon Glass <sjg@chromium.org> Signed-off-by: Tom Warren <twarren@nvidia.com> 
Change jump_to_image_no_args() to a weak symbol to allow override by
SoC specific code.  This is required by tegra because the SPL runs on
a different CPU from the image it is loading, so tegra specific
initialization is required to start the host CPU.  Pass in spl_image
as a parameter for the same reason.

Signed-off-by: Allen Martin <amartin@nvidia.com>
Acked-by: Tom Rini <trini@ti.com>
Acked-by: Simon Glass <sjg@chromium.org>
Tested-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Tom Warren <twarren@nvidia.com>
SPL: Remove setting GD_FLG_RELOC in preloader_console_init() 2012-10-15T18:53:47+00:00 Tom Rini trini@ti.com 2012-10-01T21:44:31+00:00 868444faa0327756ffe4655b2f8678a5d3b5c505 We have not strictly speaking relocated at this point, do not claim that we have. This is not required for output. Signed-off-by: Tom Rini <trini@ti.com> 
We have not strictly speaking relocated at this point, do not claim that
we have.  This is not required for output.

Signed-off-by: Tom Rini <trini@ti.com>
OMAP: networking support for SPL 2012-10-01T17:02:14+00:00 Ilya Yanok ilya.yanok@cogentembedded.com 2012-09-18T00:22:50+00:00 7ac2fe2da21d292aeaf3af74e5c80de9ce9dab56 This patch adds support for networking in SPL. Some devices are capable of loading SPL via network so it makes sense to load the main U-Boot binary via network too. This patch tries to use existing network code as much as possible. Unfortunately, it depends on environment which in turn depends on other code so SPL size is increased significantly. No effort was done to decouple network code and environment so far. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Signed-off-by: Tom Rini <trini@ti.com> 
This patch adds support for networking in SPL. Some devices are
capable of loading SPL via network so it makes sense to load the
main U-Boot binary via network too. This patch tries to use
existing network code as much as possible. Unfortunately, it depends
on environment which in turn depends on other code so SPL size
is increased significantly. No effort was done to decouple network
code and environment so far.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Signed-off-by: Tom Rini <trini@ti.com>
OMAP: spl: call timer_init() from SPL 2012-10-01T17:02:14+00:00 Ilya Yanok ilya.yanok@cogentembedded.com 2012-09-17T10:26:26+00:00 4063c77deb26432e2f396ca5dfdb911a24140e96 We need to initialize timer properly, otherwise all delays inside SPL will be wrong. Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com> 
We need to initialize timer properly, otherwise all delays
inside SPL will be wrong.

Signed-off-by: Ilya Yanok <ilya.yanok@cogentembedded.com>
SPL: Add support for loading image from ram in SPL. 2012-09-27T18:20:28+00:00 Pavel Machek pavel@denx.de 2012-08-30T20:42:11+00:00 c57b953da923c6402afc1c890c21fdc7d5a2cc4a Signed-off-by: Pavel Machek <pavel@denx.de> Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Pavel Machek <pavel@denx.de>
Signed-off-by: Tom Rini <trini@ti.com>
SPL: Rework how we inform about un-headered images 2012-09-27T18:20:28+00:00 Tom Rini trini@ti.com 2012-08-27T21:58:28+00:00 4212098181ac91e14374c1207b1e98595f1cc717 First, remove the puts from the case where we don't have an mkimage header as this is somewhat common and intentional for no-arg target images. Second, rework the final switch statement in board_init_r to, in the case of !CONFIG_SPL_OS_BOOT be only about doing debug prints about if we know what the magic is or not (the CONFIG_SPL_OS_BOOT case is unchanged). Then we call jump_to_image_no_args(). This gives us the same behavior as before but with slightly smaller code. Signed-off-by: Tom Rini <trini@ti.com> 
First, remove the puts from the case where we don't have an mkimage
header as this is somewhat common and intentional for no-arg target
images.  Second, rework the final switch statement in board_init_r to,
in the case of !CONFIG_SPL_OS_BOOT be only about doing debug prints
about if we know what the magic is or not (the CONFIG_SPL_OS_BOOT case
is unchanged).  Then we call jump_to_image_no_args().  This gives us the
same behavior as before but with slightly smaller code.

Signed-off-by: Tom Rini <trini@ti.com>
SPL: Make un-supported boot device puts a debug instead 2012-09-27T18:20:27+00:00 Tom Rini trini@ti.com 2012-08-27T21:57:26+00:00 1292eaf3530257e24c77979295892718662eda4b Signed-off-by: Tom Rini <trini@ti.com> 
Signed-off-by: Tom Rini <trini@ti.com>