u-boot.git/common/spl, branch v2015.04-rc1 Unnamed repository; edit this file 'description' to name the repository. spl: Change printf to puts for "Unsupported boot-device" 2015-01-28T21:58:01+00:00 Stefan Roese sr@denx.de 2015-01-27T15:45:09+00:00 e860d012c407d6e8baa9cbf7789c201f675e5bee Microblaze currently doesn't use printf in SPL. So this one line was the only reference to it and resulted in the printf functionality to be pulled in. Exceeding the 4k size limit. Lets change the printf back to puts so that Microblaze is fixed again. The only drawback is that the detected boot-device number will not be printed. But this message alone should be helpful enough to get an idea where the boot process is broken. Signed-off-by: Stefan Roese <sr@denx.de> Cc: Tom Rini <trini@ti.com> Cc: Michal Simek <michal.simek@xilinx.com> Acked-by: Michal Simek <michal.simek@xilinx.com> 
Microblaze currently doesn't use printf in SPL. So this one line was the only
reference to it and resulted in the printf functionality to be pulled in.
Exceeding the 4k size limit. Lets change the printf back to puts so that
Microblaze is fixed again. The only drawback is that the detected boot-device
number will not be printed. But this message alone should be helpful enough
to get an idea where the boot process is broken.

Signed-off-by: Stefan Roese <sr@denx.de>
Cc: Tom Rini <trini@ti.com>
Cc: Michal Simek <michal.simek@xilinx.com>
Acked-by: Michal Simek <michal.simek@xilinx.com>
spl: spl_nor: surround Linux-load code with #ifdef CONFIG_SPL_OS_BOOT 2015-01-14T16:37:39+00:00 Masahiro Yamada yamada.m@jp.panasonic.com 2015-01-08T10:23:35+00:00 9f9d8704b6566c24b6efaa23abc42cfbc5aadb36 If CONFIG_SPL_NOR_SUPPORT is defined, spl_nor_load_image() requires spl_start_uboot(), CONFIG_SYS_OS_BASE, CONFIG_SYS_SPL_ARGS_ADDR, CONFIG_SYS_FDT_BASE to be defined even if users just want to run U-Boot, not Linux. This is inconvenient. This patch is following the codying style of common/spl/spl_nand.c. Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com> 
If CONFIG_SPL_NOR_SUPPORT is defined, spl_nor_load_image() requires
spl_start_uboot(), CONFIG_SYS_OS_BASE, CONFIG_SYS_SPL_ARGS_ADDR,
CONFIG_SYS_FDT_BASE to be defined even if users just want to run
U-Boot, not Linux.  This is inconvenient.

This patch is following the codying style of common/spl/spl_nand.c.

Signed-off-by: Masahiro Yamada <yamada.m@jp.panasonic.com>
Merge branch 'master' of git://git.denx.de/u-boot-mmc 2015-01-06T15:44:47+00:00 Tom Rini trini@ti.com 2015-01-06T15:44:47+00:00 2ed3f9114300b1f11f1f30d9d2478146afc3af0e 






spl: mmc: Fix raw boot mode (related to commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f)
2015-01-06T08:10:30+00:00

Guillaume GARDET
guillaume.gardet@free.fr

2014-12-16T11:00:44+00:00

2c84c9a40ac19c44c0c9f865fcf6f459c426659e

As reported by Robert Nelson, commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f
may break MMC RAW boot mode.
This patch fixes the check path to fix MMC Raw boot mode.

Tested raw boot mode and FS boot mode on a pandaboard (rev. A3).

Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>

Cc: Tom Rini <trini@ti.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>





As reported by Robert Nelson, commit 4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f
may break MMC RAW boot mode.
This patch fixes the check path to fix MMC Raw boot mode.

Tested raw boot mode and FS boot mode on a pandaboard (rev. A3).

Reported-by: Robert Nelson <robertcnelson@gmail.com>
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>

Cc: Tom Rini <trini@ti.com>
Cc: Robert Nelson <robertcnelson@gmail.com>
Tested-by: Robert Nelson <robertcnelson@gmail.com>







spl_sata.c: Add <scsi.h>
2015-01-06T02:14:04+00:00

Tom Rini
trini@ti.com

2015-01-06T02:14:04+00:00

fc89b2e479f0b75008bab1b59170aa8179ba61fe

We need <scsi.h> for scsi_scan().

Signed-off-by: Tom Rini <trini@ti.com>





We need <scsi.h> for scsi_scan().

Signed-off-by: Tom Rini <trini@ti.com>







spl: if MMCSD_MODE_RAW fails, try MMCSD_MODE_FS, if available
2014-12-08T14:35:42+00:00

Guillaume GARDET
guillaume.gardet@free.fr

2014-11-18T09:44:46+00:00

4c5bbc2328a24f5e1ee990c9a9527e48e5fb3b5f

In SPL MMC, boot modes are exclusive. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to
try MMCSD_MODE_FS then, if available.

It has been tested on a pandaboard (rev. A3).

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>





In SPL MMC, boot modes are exclusive. So, if MMCSD_MODE_RAW fails, the board hangs. This patch allows to
try MMCSD_MODE_FS then, if available.

It has been tested on a pandaboard (rev. A3).

Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>







spl: MMC U-Boot image load from raw partition
2014-12-08T14:35:06+00:00

Paul Kocialkowski
contact@paulk.fr

2014-11-08T22:14:56+00:00

b97300b62f2702bf1c02179a52c9027c8110331a

Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to
read the partition table, looking for a partition number instead of using
a fixed sector address.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Only add mmc_load_image_raw_partition() when
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing
conversion in spl_mmc_load_image()]
Signed-off-by: Tom Rini <trini@ti.com>





Raw images of U-Boot can be stored inside MMC partitions, so it makes sense to
read the partition table, looking for a partition number instead of using
a fixed sector address.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>
[trini: Only add mmc_load_image_raw_partition() when
CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_PARTITION to avoid warning, add missing
conversion in spl_mmc_load_image()]
Signed-off-by: Tom Rini <trini@ti.com>







MMC SD fs boot partition config coding style and proper description
2014-12-04T16:22:06+00:00

Paul Kocialkowski
contact@paulk.fr

2014-11-08T22:14:55+00:00

e2ccdf89a0196b40b445700670777ebee231756d

CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other config
options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR.

In addition, it is not related to raw mode booting but to fs mode instead.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>





CONFIG_SYS_MMC_SD_FS_BOOT_PARTITION ought to be called
CONFIG_SYS_MMCSD_FS_BOOT_PARTITION to keep it consistent with other config
options such as: CONFIG_SYS_MMCSD_RAW_MODE_U_BOOT_SECTOR.

In addition, it is not related to raw mode booting but to fs mode instead.

Signed-off-by: Paul Kocialkowski <contact@paulk.fr>
Reviewed-by: Tom Rini <trini@ti.com>







spl: Fix SPL EXT support
2014-11-26T16:21:16+00:00

Guillaume GARDET
guillaume.gardet@free.fr

2014-11-25T14:34:16+00:00

d3e488eaf48c49980adb8509a76f8577b1cf2599

Commit 9f12cd0e062614e19734b2ab37842d387457c5e5 has broken SPL EXT support.
This patch update error code check to get SPL EXT support working again.

Tested on a Pandaboard (rev. A3).

Reviewed-by: Suriyan Ramasami <suriyan.r@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>





Commit 9f12cd0e062614e19734b2ab37842d387457c5e5 has broken SPL EXT support.
This patch update error code check to get SPL EXT support working again.

Tested on a Pandaboard (rev. A3).

Reviewed-by: Suriyan Ramasami <suriyan.r@gmail.com>
Reviewed-by: Simon Glass <sjg@chromium.org>
Signed-off-by: Guillaume GARDET <guillaume.gardet@free.fr>
Cc: Tom Rini <trini@ti.com>







Merge git://git.denx.de/u-boot-dm
2014-11-24T17:01:48+00:00

Tom Rini
trini@ti.com

2014-11-24T17:01:48+00:00

1739564e753bc3a8097f8937a3cbe738bdaaed5d

Conflicts:
	drivers/serial/serial-uclass.c

Signed-off-by: Tom Rini <trini@ti.com>





Conflicts:
	drivers/serial/serial-uclass.c

Signed-off-by: Tom Rini <trini@ti.com>