u-boot.git/common/spl, branch v2022.10-rc2

vpl: fix reference in comment to non-existing SPL_SERIAL_SUPPORT

2022-08-04T19:32:20Z

Since commit 2a7360666871 ("serial: Rename SERIAL_SUPPORT to SERIAL") SPL_SERIAL_SUPPORT is named SPL_SERIAL. So let's update the comment to point to the correct Kconfig option in the comment of VPL_SERIAL. Fixes: 747093dd408 ("vpl: Add Kconfig options for VPL") Cc: Quentin Schulz Signed-off-by: Quentin Schulz Reviewed-by: Simon Glass

spl: mmc: Use correct MMC device when loading image

2022-08-04T17:59:59Z

When attempting to load images from multiple MMC devices in sequence, spl_mmc_load() chooses the wrong device from the second attempt onwards. The reason is that MMC initialization is only done on its first call and spl_mmc_load() will then continue using this same device for all future calls. Fix this by checking the devnum of the "cached" device struct against the one which is requested. If they match, use the cached one but if they do not match, initialize the new device. This fixes specifying multiple MMC devices in the SPL's boot order to fall back when U-Boot Proper is corrupted or missing on the first attempted MMC device. Fixes: e1eb6ada4e38 ("spl: Make image loader infrastructure more universal") Signed-off-by: Harald Seiler

Merge tag 'u-boot-imx-20220726' of https://gitlab.denx.de/u-boot/custodians/u-boot-imx

2022-07-26T14:26:00Z

u-boot-imx-20220726 ------------------- i.MX for 2022.10 - Added i.MX93 architecture CI: https://source.denx.de/u-boot/custodians/u-boot-imx/-/pipelines/12891

spl: Use SPL_FIT_IMAGE_TINY for iMX9

2022-07-26T09:29:00Z

Select SPL_FIT_IMAGE_TINY for i.MX9 Signed-off-by: Peng Fan

spl: imx8mm: enlarge SPL_MAX_SIZE

2022-07-26T09:28:59Z

The CONFIG_SPL_MAX_SIZE could be 0x27000 for i.MX8MM when SPL_TEXT_BASE set to 0x7E1000. The DDR firmware max uses 96KB, there is a 4KB padding header before SPL_TEXT_BASE, so the SPL MAX SIZE is `256KB - 96KB - 4KB`. Signed-off-by: Peng Fan Reviewed-by: Fabio Estevam

spl: fit: pass real compatible flags to fpga_load()

2022-07-26T07:34:21Z

Convert taken FPGA image "compatible" string to a binary compatible flag and pass it to an FPGA driver. Signed-off-by: Oleksandr Suvorov Tested-by: Ricardo Salveti Tested-by: Adrian Fiergolski Link: https://lore.kernel.org/r/20220722141614.297383-9-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek

fpga: pass compatible flags to fpga_load()

2022-07-26T07:34:21Z

These flags may be used to check whether an FPGA driver is able to load a particular FPGA bitstream image. Signed-off-by: Oleksandr Suvorov Tested-by: Ricardo Salveti Tested-by: Adrian Fiergolski Link: https://lore.kernel.org/r/20220722141614.297383-7-oleksandr.suvorov@foundries.io Signed-off-by: Michal Simek

xilinx: zynqmp: Do not use 0 as spl bss start address

2022-07-26T06:23:54Z

Do not use 0 as address for memory because of the special meaning for pointers (null pointer). Change the spl bss start address to the second page. Signed-off-by: Stefan Herbrechtsmeier Link: https://lore.kernel.org/r/20220714134733.7487-1-stefan.herbrechtsmeier-oss@weidmueller.com Signed-off-by: Michal Simek

spl: Use SPL_TEXT_BASE instead of ISW_ENTRY_ADDR

2022-07-25T18:57:27Z

The ISW_ENTRY_ADDR symbol was used for OMAP devices in place of SPL_TEXT_BASE. Keystone2 HS devices were not using it right either. Remove ISW_ENTRY_ADDR and use SPL_TEXT_BASE directly. Signed-off-by: Andrew Davis Reviewed-by: Tom Rini

arch: mvebu: Disable by default unused peripherals in SPL

2022-07-21T08:14:04Z

SPL on mvebu loads proper U-Boot from custom Marvell kwbimage format and therefore support for other binary formats is not required to be present in SPL. Boot source of proper U-Boot is defined by compile time options and therefore it is not required to enable all possible and unused peripherals in SPL by default. This change decrease size of SPL binaries. Signed-off-by: Pali Rohár Reviewed-by: Stefan Roese