u-boot.git/common/spl, branch v2025.10-rc2

spl: NULL check variable before dereference

2025-07-29T19:12:12Z

In boot_from_devices the variable loader is not NULL checked after assignment and before first use but later code does check it for NULL. Add a NULL check before first use. This issue was found by Smatch. Signed-off-by: Andrew Goodbody

sunxi: add basic A523 support

2025-07-27T22:11:31Z

Add the basic Kconfig options, addresses and other values for the existing Kconfig settings for the new Allwinner A523/T527/H728 SoC. Signed-off-by: Andre Przywara

spl: spl_imx_container: Delete uninitialized variable

2025-07-24T11:00:47Z

The 'overhead' variable is uninitialized and actually shall not be used. Delete it to fix coverity CID 37041718 - Uninitialized scalar variable. Fixes: 73c40fcb7367 ("spl: Refactor spl_load_info->read to use units of bytes") Reported-by: Andrew Goodbody Signed-off-by: Ye Li Reviewed-by: Peng Fan Signed-off-by: Fabio Estevam Reviewed-by: Andrew Goodbody

spl: imx: Add support for new PQC container

2025-07-17T12:56:33Z

To support PQC container format which is used for post quantum authentication on new i.MX parts like i.MX94 The major changes compared to legacy container format is in signature block, new container tag and version, and new alignment of container header. Signed-off-by: Ye Li Signed-off-by: Jacky Bai Signed-off-by: Alice Guo Acked-by: Peng Fan

Kconfig: Test for !COMPILE_TEST in some locations

2025-07-11T17:33:25Z

We have a few options that we cannot enable in a "allyesconfig" type build because we cannot use zero as a default value. - The logic around HAS_BOARD_SIZE_LIMIT assumes that if we have set this then we compare with it. Similarly, we need to set SPL_NO_BSS_LIMIT as the default there. - Both SYS_CUSTOM_LDSCRIPT and ENV_USE_DEFAULT_ENV_TEXT_FILE then prompt for a file name to use. - The SYS_I2C_SOFT driver is a legacy driver which requires a lot of configuration within the board config. file instead, so disable it. Signed-off-by: Tom Rini

arm64: renesas: Add Renesas R-Car Gen4 SCIF/HSCIF loader SREC generation

2025-07-10T17:26:55Z

Add Renesas R-Car Gen4 SCIF/HSCIF loader compatible SREC generation. This is a regular U-Boot SPL SREC augmented with a short header which describes where to store the received data and how much data to store. This header is interpreted by the R-Car Gen4 BootROM SCIF/HSCIF loader. Signed-off-by: Marek Vasut

Merge branch 'next'

2025-07-07T20:10:59Z

common/spl: guard against buffer overflow in spl_fit_get_image_name()

2025-06-26T17:58:17Z

A malformed FIT image could have an image name property that is not NUL terminated. Reject such images. Reported-by: Mikhail Kshevetskiy Signed-off-by: Heinrich Schuchardt Tested-by: E Shattow

common/spl: Revert fix potential out of buffer access in spl_fit_get_image_name function

2025-06-26T17:58:17Z

The change in commit 3704b888a4ca ("common/spl: fix potential out of buffer access in spl_fit_get_image_name function") led to function spl_fit_get_image_name() no longer detecting if a property does not exist at a non-zero buffer. Link: https://lore.kernel.org/u-boot/38f5d078-3328-4bdb-9c95-4fb5fe89ddc2@gmx.de/T/#m59f3a23e675daa992c28d12236de71cae2ca2bb9 Fixes: 3704b888a4ca ("common/spl: fix potential out of buffer access in spl_fit_get_image_name function") Signed-off-by: Heinrich Schuchardt Tested-by: E Shattow

sunxi: add support for the Allwinner A100/A133 SoC

2025-06-24T00:59:09Z

The Allwinner A100 SoC has been around for a while, mostly on cheap tablets, but didn't generate much interest in the community so far. There were some efforts by two Allwinner employees in 2020, which led to basic upstream Linux support for that SoC, although this momentum dried up pretty quickly, leaving a lot of peripherals unsupported. The A100 was silently replaced with the seemingly identical Allwinner A133, which is reportedly a better bin of the A100. So far we assume that both are compatible from a software perspective. There are some more devices with the A133 out there now, so people are working on filling the gaps, and adding U-Boot (and TF-A) support. Based on the just added pinctrl, clock and DRAM support, this adds the missing bits, mostly addresses and values for the SPL. The A133 seems to be an predecessor to the H6, so we can share a lot of code with that (and the H616 code), and just need to adjust some details. Signed-off-by: Andre Przywara