u-boot.git/common/splash_source.c, branch v2020.10

common: Drop log.h from common header

2020-05-19T01:19:18+00:00

Move this header out of the common header.

Signed-off-by: Simon Glass

common: Move command functions out of common.h

2019-12-02T23:25:02+00:00

Move these functions into the command.h header file which is a better fit.

Signed-off-by: Simon Glass 
Reviewed-by: Tom Rini

env: Move env_get() to env.h

2019-08-11T20:43:41+00:00

Move env_get() over to the new header file.

Acked-by: Joe Hershberger 
Signed-off-by: Simon Glass

splash: Load internal and external data from FIT

2019-05-20T09:56:41+00:00

The FIT image could contain the splash data in 3 different structure:
- The splash data is embedded in FIT image (internal)
  In this case, the property 'data' presents in FIT image header. And
  internal information 'start' and 'end' represent the location and
  size of splash data inside of FIT image.
- The splash data is external with absolute position in FIT image
  This case is made by 'mkimage -p [pos]'. The splash data is stored
  at the absolute position. Instead the property 'data', the properties
  'data-position' and 'data-size' are used to specify the location and
  size of the splash data.
- the splash data is external with relative offset in FIT image
  This case is made by 'mkimage -E'. The splash data is placed after
  the FIT image header with 4 byte alignment. Instead the property
  'data', the properties 'data-offset' and 'data-size' are used to
  specify the location and size of the splash data.

Currently, the splash only support to load external data with relative
offset from FIT image. This commit make it possible to load the splash
data embedded in FIT image or the external data with absolute position

This inspiration comes from Simon Glass , see
common/spl_fit.c

Signed-off-by: Leo Ruan 
Signed-off-by: Mark Jonas 
Reviewed-by: Simon Glass 
Reviewed-by: Stefano Babic

splash: Use splashfile instead of location->name

2019-05-20T09:55:42+00:00

The splash image could be loaded from different sources (e.g. sf, mmc)
with different formats (e.g. raw, file-system). These sources are
structured by a board dependent object 'splash_location'. To decide
where is the splash image loaded, following environment variables are
used to select the splash source and file:
- 'splashsource' is used to select the splash source by setting its
  value to specified name of splash location.
- 'splashfile' specify the name of splash image file

But, when loads the splash image from FIT, the name of splash image
within FIT is specified by splash location name. Due to the splash
location name is already used for the splash source, its name may
conflicts with the name of splash image.

To solve the conflict, the environment variable 'splashfile' is used
to specify the splash image in FIT, and keeps the splash location
name for the splash source.

Signed-off-by: Leo Ruan 
Signed-off-by: Mark Jonas 
Reviewed-by: Simon Glass 
Reviewed-by: Stefano Babic 
Reviewed-by: Tomas Melin

SPDX: Convert all of our single license tags to Linux Kernel style

2018-05-07T13:34:12+00:00

When U-Boot started using SPDX tags we were among the early adopters and
there weren't a lot of other examples to borrow from.  So we picked the
area of the file that usually had a full license text and replaced it
with an appropriate SPDX-License-Identifier: entry.  Since then, the
Linux Kernel has adopted SPDX tags and they place it as the very first
line in a file (except where shebangs are used, then it's second line)
and with slightly different comment styles than us.

In part due to community overlap, in part due to better tag visibility
and in part for other minor reasons, switch over to that style.

This commit changes all instances where we have a single declared
license in the tag as both the before and after are identical in tag
contents.  There's also a few places where I found we did not have a tag
and have introduced one.

Signed-off-by: Tom Rini

splash_source: Verify FIT magic

2017-09-04T21:53:47+00:00

Before reading entire FIT image, add sanity check by testing image
header against FDT_MAGIC. This should help avoid problems in situations
where FIT is not yet available from storage device, for example when
performing initial programming of device.

Cc: Anatolij Gustschin 
Acked-by: Tomas Melin

Revert "Merge git://git.denx.de/u-boot-video"

2017-09-01T20:17:17+00:00

This reverts commit 1d20170467b079642be96996dcd71db64c3c365c, reversing
changes made to 6aee2ab68c362ace5a59f89a63abed82e0bf19e5.

The mxc_ipuv3_fb.c changes introduce build failures on some targets.

Signed-off-by: Tom Rini

splash_source: Verify FIT magic

2017-08-28T22:20:16+00:00

Before reading entire FIT image, add sanity check by testing image
header against FDT_MAGIC. This should help avoid problems in situations
where FIT is not yet available from storage device, for example when
performing initial programming of device.

Cc: Anatolij Gustschin 
Acked-by: Tomas Melin

Merge branch 'master' of git://git.denx.de/u-boot-mmc

2017-08-18T22:24:36+00:00