Add what it takes to enable NETDEVICES with NET_LWIP and enable DHCP as well as the dhcp command. CMD_TFTPBOOT is selected by BOOTMETH_EFI due to this code having an implicit dependency on do_tftpb(). Note that PXE is likely non-fonctional with NET_LWIP (or at least not 100% functional) because DHCP option 209 is not supported by the lwIP library. Therefore, BOOTP_PXE_DHCP_OPTION cannot be enabled. Signed-off-by: Jerome Forissier <jerome.forissier@linaro.org> Tested-by: Ilias Apalodimas <ilias.apalodimas@linaro.org> Acked-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
Clear any USB-keyboard devices before running a unit test, to avoid using a stale udevice pointer in stdio. Add a long comment to explain this situation and why this solution seems best, at least for now. Signed-off-by: Simon Glass <sjg@chromium.org>
This device contains a pointer to struct udevice so set the flag indicating that, just to be tidy. Signed-off-by: Simon Glass <sjg@chromium.org>
The driver model deadline for USB was in 2019, so drop the old USB keyboard code, to avoid needing to deal with the extra code path. Drop the unnecessary #ifdef around USB_KBD_BOOT_REPORT_SIZE while we are here. Signed-off-by: Simon Glass <sjg@chromium.org>
As part of bringing the master branch back in to next, we need to allow for all of these changes to exist here. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
When bringing in the series 'arm: dts: am62-beagleplay: Fix Beagleplay Ethernet"' I failed to notice that b4 noticed it was based on next and so took that as the base commit and merged that part of next to master. This reverts commit c8ffd1356d42223cbb8c86280a083cc3c93e6426, reversing changes made to 2ee6f3a5f7550de3599faef9704e166e5dcace35. Reported-by: Jonas Karlman <jonas@kwiboo.se> Signed-off-by: Tom Rini <trini@konsulko.com>
Remove <common.h> from all "commmon/" files and when needed add missing include files directly. Signed-off-by: Tom Rini <trini@konsulko.com>
Those keyboards do not return the current device state. Polling will timeout unless there are key presses. This is not a problem during operation but the initial device state query during probing will fail. Skip this step in usb_kbd_probe_dev() to make these devices useable. Not all Apple keyboards behave like this. A keyboard with USB vendor/product ID 05ac:0221 is reported to work with the current code. Unfortunately some Keychron keyboards "re-use" Apple's vendor ID and show the same behavior (Keychron C2, 05ac:024f for example). Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Janne Grunau <j@jannau.net>
Apple USB keyboards (Magic Keyboard from 2021 (product id 0x029c)) carry the HID keyboard boot protocol on the second interface descriptor. Probe via vendor and product IDs since the class/subclass/protocol match uses the first interface descriptor. Probe the two first interface descriptors for the HID keyboard boot protocol. USB configuration descriptor for reference: | Bus 003 Device 002: ID 05ac:029c Apple, Inc. Magic Keyboard | Device Descriptor: | bLength 18 | bDescriptorType 1 | bcdUSB 2.00 | bDeviceClass 0 [unknown] | bDeviceSubClass 0 [unknown] | bDeviceProtocol 0 | bMaxPacketSize0 64 | idVendor 0x05ac Apple, Inc. | idProduct 0x029c Magic Keyboard | bcdDevice 3.90 | iManufacturer 1 Apple Inc. | iProduct 2 Magic Keyboard | iSerial 3 ... | bNumConfigurations 1 | Configuration Descriptor: | bLength 9 | bDescriptorType 2 | wTotalLength 0x003b | bNumInterfaces 2 | bConfigurationValue 1 | iConfiguration 4 Keyboard | bmAttributes 0xa0 | (Bus Powered) | Remote Wakeup | MaxPower 500mA | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 0 | bAlternateSetting 0 | bNumEndpoints 1 | bInterfaceClass 3 Human Interface Device | bInterfaceSubClass 0 [unknown] | bInterfaceProtocol 0 | iInterface 5 Device Management | HID Device Descriptor: | bLength 9 | bDescriptorType 33 | bcdHID 1.10 | bCountryCode 0 Not supported | bNumDescriptors 1 | bDescriptorType 34 Report | wDescriptorLength 83 | Report Descriptors: | ** UNAVAILABLE ** | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x81 EP 1 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0010 1x 16 bytes | bInterval 8 | Interface Descriptor: | bLength 9 | bDescriptorType 4 | bInterfaceNumber 1 | bAlternateSetting 0 | bNumEndpoints 1 | bInterfaceClass 3 Human Interface Device | bInterfaceSubClass 1 Boot Interface Subclass | bInterfaceProtocol 1 Keyboard | iInterface 6 Keyboard / Boot | HID Device Descriptor: | bLength 9 | bDescriptorType 33 | bcdHID 1.10 | bCountryCode 13 International (ISO) | bNumDescriptors 1 | bDescriptorType 34 Report | wDescriptorLength 207 | Report Descriptors: | ** UNAVAILABLE ** | Endpoint Descriptor: | bLength 7 | bDescriptorType 5 | bEndpointAddress 0x82 EP 2 IN | bmAttributes 3 | Transfer Type Interrupt | Synch Type None | Usage Type Data | wMaxPacketSize 0x0010 1x 16 bytes | bInterval 8 Reviewed-by: Marek Vasut <marex@denx.de> Reviewed-by: Neal Gompa <neal@gompa.dev> Signed-off-by: Janne Grunau <j@jannau.net>
Globally replace all occurances of WATCHDOG_RESET() with schedule(), which handles the HW_WATCHDOG functionality and the cyclic infrastructure. Signed-off-by: Stefan Roese <sr@denx.de> Reviewed-by: Simon Glass <sjg@chromium.org> Tested-by: Tom Rini <trini@konsulko.com> [am335x_evm, mx6cuboxi, rpi_3,dra7xx_evm, pine64_plus, am65x_evm, j721e_evm]