u-boot.git/common, branch v2009.03-rc2 Unnamed repository; edit this file 'description' to name the repository. lcd: Fix compilation warning in common/lcd.c 2009-02-25T19:28:13+00:00 Anatolij Gustschin agust@denx.de 2009-02-25T19:28:13+00:00 00cc5595a7caac8066b408774383a956c2e26797 Fix following warning while compilation for mcc200 board: lcd.c: In function 'lcd_display_bitmap': lcd.c:625: warning: unused variable 'cmap' Signed-off-by: Anatolij Gustschin <agust@denx.de> 
Fix following warning while compilation for mcc200 board:

lcd.c: In function 'lcd_display_bitmap':
lcd.c:625: warning: unused variable 'cmap'

Signed-off-by: Anatolij Gustschin <agust@denx.de>
LCD: support 8bpp BMPs on 16bpp displays 2009-02-24T09:19:00+00:00 Guennadi Liakhovetski lg@denx.de 2009-02-06T09:37:53+00:00 b245e65ee3c4cce3ccf008a21f4528239655876c This patch also simplifies some ifdefs in lcd.c, introduces a generic vidinfo_t, which new drivers are encouraged to use and old drivers to switch over to. Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de> 
This patch also simplifies some ifdefs in lcd.c, introduces a generic
vidinfo_t, which new drivers are encouraged to use and old drivers to switch
over to.

Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
Add 16bpp BMP support 2009-02-24T09:05:14+00:00 Mark Jackson mpfj@mimc.co.uk 2009-02-06T09:37:49+00:00 a303dfb0e9a93e516ea9427b5c09543d5f74ade1 This patch adds 16bpp BMP support to the common lcd code. Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code. At the moment it's only been tested on the MIMC200 AVR32 board, but extending this to other platforms should be a simple task !! Signed-off-by: Mark Jackson <mpfj@mimc.co.uk> Signed-off-by: Guennadi Liakhovetski <lg@denx.de> Acked-by: Anatolij Gustschin <agust@denx.de> 
This patch adds 16bpp BMP support to the common lcd code.

Use CONFIG_BMP_16BPP and set LCD_BPP to LCD_COLOR16 to enable the code.

At the moment it's only been tested on the MIMC200 AVR32 board, but extending
this to other platforms should be a simple task !!

Signed-off-by: Mark Jackson <mpfj@mimc.co.uk>
Signed-off-by: Guennadi Liakhovetski <lg@denx.de>
Acked-by: Anatolij Gustschin <agust@denx.de>
netloop: speed up NetLoop 2009-02-23T07:49:33+00:00 Heiko Schocher hs@denx.de 2009-02-10T08:38:52+00:00 2f70c49e5b9813635ad73666aa30f304c7fdeda9 NetLoop polls every cycle with getenv some environment variables. This is horribly slow, especially when the environment is big. This patch reads only the environment variables in NetLoop, when they were changed. Also moved the init part of the NetLoop function in a seperate function. Signed-off-by: Heiko Schocher <hs@denx.de> Signed-off-by: Ben Warren <biggerbadderben@gmail.com> 
NetLoop polls every cycle with getenv some environment variables.
This is horribly slow, especially when the environment is big.

This patch reads only the environment variables in NetLoop,
when they were changed.

Also moved the init part of the NetLoop function in a seperate
function.

Signed-off-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Ben Warren <biggerbadderben@gmail.com>
arm: add uart dcc support 2009-02-22T14:49:28+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2009-02-22T14:49:28+00:00 4f5728987f4f9f7845688482aa2b7f2127768165 Serial driver via the EmbeddedICE macrocell's DCC channel using co-processor 14. It does include a timeout to ensure that the system does not totally freeze when there is nothing connected to read. Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Serial driver via the EmbeddedICE macrocell's DCC channel using
co-processor 14.

It does include a timeout to ensure that the system does not
totally freeze when there is nothing connected to read.

Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
bootm: Reduce the unnecessary memmove 2009-02-21T22:00:20+00:00 Minkyu Kang mk7.kang@samsung.com 2009-02-18T00:05:52+00:00 fca0cecff73db99d99ad094cca7980472b8a11b5 Although load address and image start address are same address, bootm command always does memmove. That is unnecessary memmove and can be taken few milliseconds (about 500 msec to 1000 msec). If skip this memmove, we can reduce the boot time. Signed-off-by: Minkyu Kang <mk7.kang@samsung.com> 
Although load address and image start address are same address,
bootm command always does memmove.
That is unnecessary memmove and can be taken few milliseconds
(about 500 msec to 1000 msec).
If skip this memmove, we can reduce the boot time.

Signed-off-by: Minkyu Kang <mk7.kang@samsung.com>
lcd_putc bug fix for tab. 2009-02-21T21:26:55+00:00 Derek Ou dou@siconix.com 2009-02-03T23:00:07+00:00 6bcb4b806cef8a5dd08fac9a4a672b96d9ee804e Signed-off-by: Derek Ou <dou@siconix.com> 
Signed-off-by: Derek Ou <dou@siconix.com>
MMC: Don't use new framework code if not enabled 2009-02-19T20:12:03+00:00 Dirk Behme dirk.behme@googlemail.com 2009-02-18T18:59:39+00:00 3511b4e208e12be85b532866f1c660aa2e021557 Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC isn't enabled. Signed-off-by: Dirk Behme <dirk.behme@googlemail.com> 
Don't use code of new MMC framework in cmd_mmc if CONFIG_GENERIC_MMC
isn't enabled.

Signed-off-by: Dirk Behme <dirk.behme@googlemail.com>
Coding style cleanup, update CHANGELOG 2009-02-18T23:41:08+00:00 Wolfgang Denk wd@denx.de 2009-02-18T23:41:08+00:00 1bba30efe1717bea13026e15c7c7d906419fac69 Signed-off-by: Wolfgang Denk <wd@denx.de> 
Signed-off-by: Wolfgang Denk <wd@denx.de>
common/console: avoid ifdef CONFIG_CONSOLE_MUX when it's possible 2009-02-17T23:55:18+00:00 Jean-Christophe PLAGNIOL-VILLARD plagnioj@jcrosoft.com 2009-02-01T16:07:52+00:00 5f0320108870e5d62983d1d5c13a2a087dddf686 Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com> 
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>