u-boot.git/common, branch v2010.06-rc3

Prepare v2010.06-rc3

2010-06-23T18:50:54+00:00

Signed-off-by: Wolfgang Denk

fdt_support: add entry for sec3.1 and fix sec3.3

2010-05-30T16:14:37+00:00

Add sec3.1 h/w geometry for fdt node fixups.

Also, technically, whilst SEC v3.3 h/w honours the tls_ssl_stream descriptor
type, it lacks the ARC4 algorithm execution unit required to be able
to execute anything meaningful with it.  Change the node to agree with
the documentation that declares that the sec3.3 really doesn't have such
a descriptor type.

Reported-by: Haiying Wang 
Signed-off-by: Kim Phillips 
Signed-off-by: Kumar Gala

nios: remove nios-32 arch

2010-05-28T14:56:04+00:00

The nios-32 arch is obsolete and broken. So it is removed.

Signed-off-by: Thomas Chou

Fix "par[t]ition" typo.

2010-05-21T20:05:05+00:00

Signed-off-by: Wolfgang Denk

Enabled support for Rev 1.3 SPD for DDR2 DIMMs

2010-05-12T09:54:30+00:00

SPD has minor change from Rev 1.2 to 1.3. This patch enables Rev 1.3.
The difference has ben examined and the code is compatible.
Speed bins is not verified on hardware for CL7 at this moment.

This patch also enables SPD Rev 1.x where x is up to "F". According to SPD
spec, the lower nibble is optionally used to determine which additinal bytes
or attribute bits have been defined. Software can safely use defaults. However,
the upper nibble should always be checked.

Signed-off-by: York Sun 
Signed-off-by: Kumar Gala

cmd_usb.c: show cmd usage if no args given

2010-05-06T21:35:34+00:00

Signed-off-by: Serge Ziryukin

Move test for unnecessary memmove to memmove_wd()

2010-05-05T22:38:06+00:00

Signed-off-by: Larry Johnson

command.c: Enable auto tab for the editenv command

2010-05-05T22:37:50+00:00

Enable the auto completion (with TAB) of the environment variable name
after the editenv command.

Signed-off-by: Ralf Tr�benbach

x86: Use CONFIG_SERIAL_MULTI

2010-05-05T22:16:46+00:00

Signed-off-by: Graeme Russ

cmd_onenand.c: moved to standard subcommand handling

2010-05-05T21:57:17+00:00

On the fly also fixed the following things:
- write help talked about a parameter oob, but that one was not used, so
  removed it from the help message.
- the test command also allowed a force subcommand but didn't use it.
  eliminated the code.
- do_onenand made static
- do_onenand contained
	int blocksize;
	...
	mtd = &onenand_mtd;
	this = mtd->priv;
	blocksize = (1 << this->erase_shift);
  As blocksize was not used the last two statements were unneeded so
  removed them.
  The first statement (mtd = ....) assigns to a global. Not sure if it
  is needed, and since I could not test this, left the line for now

Signed-off-by: Frans Meulenbroeks