u-boot.git/common, branch v2015.10 Unnamed repository; edit this file 'description' to name the repository. image-fit: Fix signature checking 2015-10-19T21:06:16+00:00 Andrej Rosano andrej@inversepath.com 2015-10-14T15:45:40+00:00 84ca65aa4bd0d03867e9e49805201d0564d3ffb0 On signature verification failures fit_image_verify() should exit with error. Signed-off-by: Andrej Rosano <andrej@inversepath.com> 
On signature verification failures fit_image_verify() should
exit with error.

Signed-off-by: Andrej Rosano <andrej@inversepath.com>
env_eeprom.c: Correct using saved environment 2015-10-12T14:33:31+00:00 Ludger Dreier ludger.dreier@keymile.com 2015-10-12T11:34:24+00:00 e3cc5bc582c06fcc0a586347736160694d8ec582 The changes in ed6a5d4 unintentionally broke support for reading the environment saved to eeprom back. To correct this the crc-check and decision on which environment to use is now moved to env_relocate_spec. This is done for both the "redundant env" and the "single env" case. Signed-off-by: Ludger Dreier <ludger.dreier@keymile.com> 
The changes in ed6a5d4 unintentionally broke support for reading the
environment saved to eeprom back.  To correct this the crc-check and
decision on which environment to use is now moved to env_relocate_spec.
This is done for both the "redundant env" and the "single env" case.

Signed-off-by: Ludger Dreier <ludger.dreier@keymile.com>
common/image.c: Make boot_get_ramdisk() perform a check for Android images 2015-10-11T21:12:12+00:00 Tom Rini trini@konsulko.com 2015-08-27T19:42:41+00:00 1fec3c5d832d6e0cac10135179016b0640f1a863 In 2dd4632 the check for where a ramdisk is found on an Android image was got moved into the "normal" loop here, causing people to have to pass the kernel address in the ramdisk address location in order to have Android boot still. This changed previous behavior so perform a check early in the function to see if we have an Android image and if so use that as where to look for the ramdisk (which is what the rest of the code here expects). We allow for this to still be overridden with an explicit ramdisk address to be passed as normal. Cc: Rob Herring <robh@kernel.org> Reported-by: Paul Kocialkowski <contact@paulk.fr> Signed-off-by: Tom Rini <trini@konsulko.com> 
In 2dd4632 the check for where a ramdisk is found on an Android image
was got moved into the "normal" loop here, causing people to have to
pass the kernel address in the ramdisk address location in order to have
Android boot still.  This changed previous behavior so perform a check
early in the function to see if we have an Android image and if so use
that as where to look for the ramdisk (which is what the rest of the
code here expects).  We allow for this to still be overridden with an
explicit ramdisk address to be passed as normal.

Cc: Rob Herring <robh@kernel.org>
Reported-by: Paul Kocialkowski <contact@paulk.fr>
Signed-off-by: Tom Rini <trini@konsulko.com>
image: fix support for Android boot images with no ramdisk 2015-10-11T21:12:10+00:00 Rob Herring robh@kernel.org 2015-10-05T19:37:07+00:00 9950098e31004fdfb94c8c6ce3f4b27566a532bd If an Android boot image does not contain a ramdisk, make sure rd_len and rd_data are returned to indicate no ramdisk rather than just relying on returning an error. Signed-off-by: Rob Herring <robh@kernel.org> 
If an Android boot image does not contain a ramdisk, make sure rd_len
and rd_data are returned to indicate no ramdisk rather than just relying
on returning an error.

Signed-off-by: Rob Herring <robh@kernel.org>
Add support for LZ4 decompression algorithm 2015-10-11T21:12:10+00:00 Julius Werner jwerner@chromium.org 2015-10-07T03:03:53+00:00 027b728d4aafb5cf97abc804944a77b837b0f07f This patch adds support for LZ4-compressed FIT image contents. This algorithm has a slightly worse compression ration than LZO while being nearly twice as fast to decompress. When loading images from a fast storage medium this usually results in a boot time win. Sandbox-tested only since I don't have a U-Boot development system set up right now. The code was imported unchanged from coreboot where it's proven to work, though. I'm mostly interested in getting this recognized by mkImage for use in a downstream project. Signed-off-by: Julius Werner <jwerner@chromium.org> Acked-by: Simon Glass <sjg@chromium.org> 
This patch adds support for LZ4-compressed FIT image contents. This
algorithm has a slightly worse compression ration than LZO while being
nearly twice as fast to decompress. When loading images from a fast
storage medium this usually results in a boot time win.

Sandbox-tested only since I don't have a U-Boot development system set
up right now. The code was imported unchanged from coreboot where it's
proven to work, though. I'm mostly interested in getting this recognized
by mkImage for use in a downstream project.

Signed-off-by: Julius Werner <jwerner@chromium.org>
Acked-by: Simon Glass <sjg@chromium.org>
common/armflash: load_image returns success or failure 2015-10-11T21:12:04+00:00 Ryan Harkin ryan.harkin@linaro.org 2015-10-09T16:18:05+00:00 6607d397c2a5ecd2fe7c940331da29692bab671e Change the load_image so that it returns success or failure of the command (using CMD_RET_SUCCESS or CMD_RET_FAILURE). This way, hush scripts can optionally load different files depending upon the system configuration. A simple example: if afs load ${kernel_name} ${kernel_addr}; then echo loaded; else echo \ not loaded; fi Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> 
Change the load_image so that it returns success or failure of the
command (using CMD_RET_SUCCESS or CMD_RET_FAILURE).

This way, hush scripts can optionally load different files depending
upon the system configuration.

A simple example:

if afs load ${kernel_name} ${kernel_addr}; then echo loaded; else echo \
not loaded; fi

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
common/armflash: add command to check if image exists 2015-10-11T21:12:04+00:00 Ryan Harkin ryan.harkin@linaro.org 2015-10-09T16:18:04+00:00 1a9717fb30c5cbb70dcc5d53791670967dfe3487 Add a command to the ARM flash support to check if an image exists or not. If the image is found, it will return CMD_RET_SUCCESS, else CMD_RET_FAILURE. This allows hush scripts to conditionally load images. A simple example: if afs exists ${kernel_name}; then echo found; else echo \ not found; fi Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org> Reviewed-by: Linus Walleij <linus.walleij@linaro.org> 
Add a command to the ARM flash support to check if an image exists or
not.

If the image is found, it will return CMD_RET_SUCCESS, else
CMD_RET_FAILURE.  This allows hush scripts to conditionally load images.

A simple example:

if afs exists ${kernel_name}; then echo found; else echo \
not found; fi

Signed-off-by: Ryan Harkin <ryan.harkin@linaro.org>
Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
net: avoid eth_unregister() call when function is unavailable 2015-09-30T02:54:45+00:00 Bernhard Nortmann bernhard.nortmann@web.de 2015-09-14T13:29:45+00:00 4917c061a206b1c220307599bbda84b9bc4d44f2 CONFIG_NETCONSOLE causes common/bootm.c to call eth_unregister() for network device shutdown. However, with CONFIG_DM_ETH this function is no longer defined. This is a workaround to avoid the call in that case, and solely rely on eth_halt(). In case this is insufficient, a proper way to unregister / remove network devices needs to be implemented. Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de> Reviewed-by: Simon Glass <sjg@chromium.org> Acked-by: Joe Hershberger <joe.hershberger@ni.com> 
CONFIG_NETCONSOLE causes common/bootm.c to call eth_unregister()
for network device shutdown. However, with CONFIG_DM_ETH this
function is no longer defined.

This is a workaround to avoid the call in that case, and solely
rely on eth_halt(). In case this is insufficient, a proper way
to unregister / remove network devices needs to be implemented.

Signed-off-by: Bernhard Nortmann <bernhard.nortmann@web.de>
Reviewed-by: Simon Glass <sjg@chromium.org>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
malloc_simple: fix malloc_ptr calculation 2015-09-28T14:15:48+00:00 Philipp Rosenberger ilu@linutronix.de 2015-09-08T10:41:24+00:00 596380db285a3f048bb47ca6507ea9de69bc2c7f The gd->malloc_ptr and the gd->malloc_limit are offsets to gd->malloc_base. But the addr variable contains the absolute address. The new_ptr must be: addr + bytes - gd->malloc_base. Signed-off-by: Philipp Rosenberger <ilu@linutronix.de> Reviewed-by: Hans de Goede <hdegoede@redhat.com> 
The gd->malloc_ptr and the gd->malloc_limit are offsets to gd->malloc_base.
But the addr variable contains the absolute address. The new_ptr must be:
addr + bytes - gd->malloc_base.

Signed-off-by: Philipp Rosenberger <ilu@linutronix.de>
Reviewed-by: Hans de Goede <hdegoede@redhat.com>
drivers/net/vsc9953: Add commands for VLAN ingress filtering 2015-09-21T15:29:48+00:00 Codrin Ciubotariu codrin.ciubotariu@freescale.com 2015-07-24T13:55:35+00:00 5ed1bacd3402a3153c8306766ad099b2261ebe36 The command: ethsw [port <port_no>] ingress filtering { [help] | show | enable | disable } - enable/disable VLAN ingress filtering on port can be used to enable/disable/show VLAN ingress filtering on a port. This command has also been added to the ethsw generic parser from common/cmd_ethsw.c Signed-off-by: Johnson Leung <johnson.leung@freescale.com> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com> Acked-by: Joe Hershberger <joe.hershberger@ni.com> Reviewed-by: York Sun <yorksun@freescale.com> 
The command:
ethsw [port <port_no>] ingress filtering
     { [help] | show | enable | disable }
  - enable/disable VLAN ingress filtering on port

can be used to enable/disable/show VLAN ingress filtering on a port.
This command has also been added to the ethsw generic parser
from common/cmd_ethsw.c

Signed-off-by: Johnson Leung <johnson.leung@freescale.com>
Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@freescale.com>
Acked-by: Joe Hershberger <joe.hershberger@ni.com>
Reviewed-by: York Sun <yorksun@freescale.com>