u-boot.git/common, branch v2016.05

usb: hub: Don't continue on get_port_status failure

2016-05-06T18:06:56+00:00

The code shouldn't continue probing the port if get_port_status() failed.

Signed-off-by: Marek Vasut 
Cc: Chin Liang See 
Cc: Dinh Nguyen 
Cc: Hans de Goede 
Cc: Stefan Roese 
Cc: Stephen Warren

usb: Assure Get Descriptor request is in separate microframe

2016-05-06T18:06:56+00:00

The Kingston DT Ultimate USB 3.0 stick is sensitive to this first
Get Descriptor request and if the request is not in a separate
microframe, the stick refuses to operate. Add slight delay, which
is enough for one microframe to pass on any USB spec revision.

Signed-off-by: Marek Vasut 
Cc: Chin Liang See 
Cc: Dinh Nguyen 
Cc: Hans de Goede 
Cc: Stefan Roese 
Cc: Stephen Warren

usb: Wait after sending Set Configuration request

2016-05-06T18:06:56+00:00

Some devices, like the SanDisk Cruzer Pop need some time to process
the Set Configuration request, so wait a little until they are ready.

Signed-off-by: Marek Vasut 
Cc: Chin Liang See 
Cc: Dinh Nguyen 
Cc: Hans de Goede 
Cc: Stefan Roese 
Cc: Stephen Warren

usb: Don't init pointer to zero, but NULL

2016-05-06T16:35:06+00:00

The pointer should always be inited to NULL, not zero (0). These are
two different things and not necessarily equal.

Signed-off-by: Marek Vasut 
Cc: Chin Liang See 
Cc: Dinh Nguyen 
Cc: Hans de Goede 
Cc: Stefan Roese 
Cc: Stephen Warren

fdt: fix setting MAC addresses for multiple interfaces

2016-05-03T22:52:10+00:00

For multiple ethernet interfaces the FDT offset of '/aliases' will change as we
are adding MAC addresses to the FDT.
Therefore only the first interface ('ethernet0') will get properly updated in
the FDT, with the rest getting FDT errors when we try to set their MAC address.

Signed-off-by: Lev Iserovich 
Acked-by: Joe Hershberger

Fix spelling of "occurred".

2016-05-02T22:37:09+00:00

Signed-off-by: Vagrant Cascadian 
Reviewed-by: Simon Glass

common/dlmalloc.c: Delete content that was moved to malloc.h

2016-04-25T19:10:36+00:00

Remove several hundred lines of content surrounded by:

#if 0  /* Moved to malloc.h */
... moved stuff ...
#endif /* 0 */                 /* Moved to malloc.h */

Signed-off-by: Robert P. J. Day 
Reviewed-by: Tom Rini

spl: spl_mmc: Disambiguate error message

2016-04-25T19:10:36+00:00

The error message "spl: mmc block read error" may come from two
different functions, so we should better annotate the function name
where the error comes from to help debugging.

Signed-off-by: Fabio Estevam 
Reviewed-by: Tom Rini

common: env: support sata device

2016-04-18T16:29:14+00:00

Introduce env support for sata device.
1. Implement write_env/read_env/env_relocate_spec/saveenv/sata_get_env_dev
2. If want to enable this feature, define CONFIG_ENV_IS_IN_SATA, and
   define CONFIG_SYS_SATA_ENV_DEV or implement your own sata_get_ev_dev.

Signed-off-by: Peng Fan 
Cc: Simon Glass 
Cc: Joe Hershberger 
Cc: Bin Meng 
Cc: Stefan Roese 
Cc: Heiko Schocher 
Cc: Stuart Longland 
Cc: Maxime Ripard 
Cc: Tom Rini 
Reviewed-by: Tom Rini

fastboot: sparse: remove unnecessary logging

2016-04-12T00:48:29+00:00

remove logging of the 'skipped' blocks

Signed-off-by: Steve Rae 
Acked-by: Maxime Ripard