u-boot.git/common, branch v2017.01

tools: mkimage: add firmware-ivt image type for HAB verification

2017-01-02T16:06:57+00:00

When we want to use Secure Boot with HAB from SPL over U-Boot.img,
we need to append the IVT to the image and leave space for the CSF.
Images generated as firmware_ivt can directly be signed using the
Freescale code signing tool. For creation of a CSF, mkimage outputs
the correct HAB Blocks for the image.
The changes to the usual firmware image class are quite small,
that is why I implemented that directly into the default_image.

Cc: sbabic@denx.de

v2-Changes: None

Signed-off-by: Sven Ebenfeld 
Reviewed-by: George McCollister 
Tested-by: George McCollister

common: Fix logic in fpga programming

2016-12-20T08:15:27+00:00

Stop boot process if fpga programming fails.
Without this patch boot process continues even if fpga programming
failed.

Signed-off-by: Michal Simek 
Reviewed-by: Simon Glass

dm: Add support for scsi/sata based devices

2016-12-20T08:15:27+00:00

All sata based drivers are bind and corresponding block
device is created. Based on this find_scsi_device() is able
to get back block device based on scsi_curr_dev pointer.

intr_scsi() is commented now but it can be replaced by calling
find_scsi_device() and scsi_scan().

scsi_dev_desc[] is commented out but common/scsi.c heavily depends on
it. That's why CONFIG_SYS_SCSI_MAX_DEVICE is hardcoded to 1 and symbol
is reassigned to a block description allocated by uclass.
There is only one block description by device now but it doesn't need to
be correct when more devices are present.

scsi_bind() ensures corresponding block device creation.
uclass post_probe (scsi_post_probe()) is doing low level init.

SCSI/SATA DM based drivers requires to have 64bit base address as
the first entry in platform data structure to setup mmio_base.

Signed-off-by: Michal Simek 
Reviewed-by: Simon Glass

common: miiphyutil: Add helper function for mdio bus name

2016-12-20T06:40:04+00:00

The most of ethernet drivers are using this mdio registration sequence.
strcpy(priv->bus->name, "emac");
mdio_register(priv->bus);
Where driver can be used only with one MDIO bus because only unique
name should be used.

Other drivers are using unique device name for MDIO registration to
support multiple instances.
snprintf(priv->bus->name, sizeof(bus->name), "%s", name);

With DM dev->seq is used more even in logs
(like random MAC address generation:
printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
       dev->name, dev->seq, pdata->enetaddr);
)
where eth%d prefix is used.

Simplify driver code to register mdio device with dev->seq number
to simplify mdio registration and reduce code duplication across
all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting.

Signed-off-by: Michal Simek 
Acked-by: Joe Hershberger 
Reviewed-by: Simon Glass

spl: Drop announce_boot_device()

2016-12-09T13:40:15+00:00

This task can be handled by inline code now. Drop this function.

Signed-off-by: Simon Glass

spl: Pass the loader into spl_load_image()

2016-12-09T13:40:15+00:00

Rather than have this function figure out the correct loader again, pass
it in as a parameter.

Signed-off-by: Simon Glass

spl: Move the loading code into its own function

2016-12-09T13:40:14+00:00

Create a boot_from_devices() function to handle trying each device. This
helps to reduce the size of the already-large board_init_r() function.

Signed-off-by: Simon Glass

spl: Add a name to the SPL load-image methods

2016-12-09T13:40:13+00:00

It is useful to name each method so that we can print out this name when
using the method. Currently this happens using a separate function. In
preparation for unifying this, add a name to each method.

The name is only available if we have libcommon support (i.e can use
printf()).

Signed-off-by: Simon Glass

Revert "Merge branch 'master' of git://www.denx.de/git/u-boot-microblaze"

2016-12-09T12:56:54+00:00

This reverts commit 3edc0c252257e4afed163a3a74aba24a5509b198, reversing
changes made to bb135a0180c31fbd7456021fb9700b49bba7f533.

common: miiphyutil: Add helper function for mdio bus name

2016-12-08T09:25:17+00:00

The most of ethernet drivers are using this mdio registration sequence.
strcpy(priv->bus->name, "emac");
mdio_register(priv->bus);
Where driver can be used only with one MDIO bus because only unique
name should be used.

Other drivers are using unique device name for MDIO registration to
support multiple instances.
snprintf(priv->bus->name, sizeof(bus->name), "%s", name);

With DM dev->seq is used more even in logs
(like random MAC address generation:
printf("\nWarning: %s (eth%d) using random MAC address - %pM\n",
       dev->name, dev->seq, pdata->enetaddr);
)
where eth%d prefix is used.

Simplify driver code to register mdio device with dev->seq number
to simplify mdio registration and reduce code duplication across
all drivers. With DM_SEQ_ALIAS enabled dev->seq reflects alias setting.

Signed-off-by: Michal Simek 
---
For example:

Board: Xilinx Zynq
Net:   ZYNQ GEM: e000b000, phyaddr 7, interface rgmii-id

Warning: ethernet@e000b000 (eth0) using random MAC address -
7a:fc:90:53:6a:41
eth0: ethernet@e000b000ZYNQ GEM: e000c000, phyaddr ffffffff, interface
rgmii-id

Warning: ethernet@e000c000 (eth3) using random MAC address -
1a:ff:d7:1a:a1:b2
, eth3: ethernet@e000c000
** Bad device size - mmc 0 **
Checking if uenvcmd is set ...
Hit any key to stop autoboot:  0
Zynq> mdio list
eth0:
17 - Marvell 88E1111S <--> ethernet@e000b000
eth3:
17 - Marvell 88E1111S <--> ethernet@e000c000
Zynq>