u-boot.git/common, branch v2017.05-rc1

Merge git://git.denx.de/u-boot-fsl-qoriq

2017-04-04T13:17:08+00:00

mtd: nand: remove nand size print from nand_init function

2017-03-28T17:39:33+00:00

Add nand_size() function to move the nand size print into initr_nand().
Remove nand size print from nand_init() to allow other function to call
nand_init() without printing nand size.

Signed-off-by: Hou Zhiqiang 
Reviewed-by: York Sun

fdt_support: Fixup 'ethernet' aliases not ending in digits

2017-03-26T14:58:23+00:00

The Raspberry Pi device tree files since Linux v4.9 have a "ethernet"
alias pointing to the on-board Ethernet device node. However,
U-Boot's fdt_fixup_ethernet() only looks at ethernet aliases ending
in digits.

As the spec doesn't mandate that aliases must end in numbers and there
have been much older uses of an "ethernet" aliases in the wild
(according to Tom Rini), change the code to accept "ethernet" as well.

Without this Linux isn't told of the MAC address provided by the
RPI firmware and the ethernet interface is always assigned a random MAC
address.

Signed-off-by: Tuomas Tynkkynen 
Reviewed-by: Tom Rini 
Acked-by: Joe Hershberger

dm: Add callback to modify the device tree

2017-03-23T14:46:23+00:00

Certain boards come in different variations by way of utilizing daughter
boards, for example. These boards might contain additional chips, which
are added to the main board's busses, e.g. I2C.

The device tree support for such boards would either, quite naturally,
employ the overlay mechanism to add such chips to the tree, or would use
one large default device tree, and delete the devices that are actually
not present.

Regardless of approach, even on the U-Boot level, a modification of the
device tree is a prerequisite to have such modular families of boards
supported properly.

Therefore, we add an option to make the U-Boot device tree (the actual
copy later used by the driver model) writeable, and add a callback
method that allows boards to modify the device tree at an early stage,
at which, hopefully, also the application of device tree overlays will
be possible.

Signed-off-by: Mario Six 
Reviewed-by: Simon Glass 
Signed-off-by: Stefan Roese

spl: Correct call to spl_common_init() with SPL_STACK_R_MALLOC_SIMPLE_LEN

2017-03-21T11:14:17+00:00

Calls to IS_ENABLED() on a non-y/n option will always be false, even
when set.  We can correct this by adding a new bool value that is set
based on the conditions required for SPL_STACK_R_MALLOC_SIMPLE_LEN to be
set instead.

Fixes: 340f418acd11 ("spl: Add spl_early_init()")
Reported-by: Lokesh Vutla 
Signed-off-by: Tom Rini 
---
Changes in v2:
- Fix thinko pointed out by Lokesh

Kconfig: Disable non-FIT SPL loading for TI secure devices

2017-03-18T18:28:51+00:00

Non-FIT SPL image loading support should be disabled for TI secure
devices as the image handlers for those image types do not follow
our secure boot flow.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass

spl: Add option to enable SPL Legacy image support

2017-03-18T18:28:51+00:00

Add a Kconfig option that enables Legacy image support, this allows
boards to explicitly disable this, for instance when needed for
security reasons.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Simon Glass 
Reviewed-by: Tom Rini 
[trini: Move to common/spl/Kconfig]
Signed-off-by: Tom Rini

spl: Convert CONFIG_SPL_ABORT_ON_RAW_IMAGE into a positive option

2017-03-18T18:28:50+00:00

CONFIG_SPL_ABORT_ON_RAW_IMAGE causes SPL to abort and move on when it
encounters RAW images, express this same functionality as a positive
option enabling support for RAW images: CONFIG_SPL_RAW_IMAGE_SUPPORT

Also move uses of this to defconfigs.

Signed-off-by: Andrew F. Davis 
Reviewed-by: Tom Rini 
Reviewed-by: Simon Glass 
[trini: Rework Kconfig logic a little, move to common/spl/Kconfig]
Signed-off-by: Tom Rini

Merge git://git.denx.de/u-boot-rockchip

2017-03-17T18:15:17+00:00

This includes support for rk3188 from Heiko Stübner and and rk3328 from
Kever Yang.  Also included is SPL support for rk3399 and a fix for
rk3288 to get it booting again (spl_early_init()).

spl: Add spl_early_init()

2017-03-16T22:03:43+00:00

At present malloc_base/_limit/_ptr are not initialised in spl_init() when
we call spl_init() in board_init_f(). This is due to a recent change aimed
at avoiding overwriting the malloc area set up on some boards by
spl_relocate_stack_gd().

However if CONFIG_SPL_STACK_R_MALLOC_SIMPLE_LEN is not defined, we now
skip setting up the memory area in spl_init() which is obviously wrong.

To fix this, add a new function spl_early_init() which can be called in
board_init_f().

Fixes: b3d2861e (spl: Remove overwrite of relocated malloc limit)
Signed-off-by: Eddie Cai 
Rewrote spl_{,early_}init() to avoid duplicate code:
Rewrite/expand commit message:
Signed-off-by: Simon Glass 
Reviewed-by: Eddie Cai