u-boot.git/common, branch v2017.07 Unnamed repository; edit this file 'description' to name the repository. avr32: Retire AVR32 for good 2017-07-06T20:17:19+00:00 Andy Shevchenko andriy.shevchenko@linux.intel.com 2017-07-05T13:25:22+00:00 daab59ac05d8fd1092e34a4c695ac265ae700141 AVR32 is gone. It's already more than two years for no support in Buildroot, even longer there is no support in GCC (last version is heavily patched 4.2.4). Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully). There is no good point to keep this support in U-Boot either. Reviewed-by: Simon Glass <sjg@chromium.org> Reviewed-by: Tom Rini <trini@konsulko.com> Reviewed-by: Heiko Schocher <hs@denx.de> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com> 
AVR32 is gone. It's already more than two years for no support in Buildroot,
even longer there is no support in GCC (last version is heavily patched 4.2.4).

Linux kernel v4.12 got rid of it (and v4.11 didn't build successfully).

There is no good point to keep this support in U-Boot either.

Reviewed-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Heiko Schocher <hs@denx.de>
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
spl: Make UBI fastmap support Kconfig selectable 2017-07-06T17:09:37+00:00 Ladislav Michl ladis@linux-mips.org 2017-06-25T08:26:11+00:00 ffc282e1995f7f8b84019ebeb1e29cfa733ba25d Fastmap was always enabled in ubispl, make it selectable by CONFIG_MTD_UBI_FASTMAP. Signed-off-by: Ladislav Michl <ladis@linux-mips.org> Acked-by: Heiko Schocher <hs@denx.de> 
Fastmap was always enabled in ubispl, make it selectable by
CONFIG_MTD_UBI_FASTMAP.

Signed-off-by: Ladislav Michl <ladis@linux-mips.org>
Acked-by: Heiko Schocher <hs@denx.de>
powerpc: remove 4xx support 2017-07-03T21:35:28+00:00 Heiko Schocher hs@denx.de 2017-06-27T14:49:14+00:00 98f705c9cefdfdba62c069821bbba10273a0a8ed There was for long time no activity in the 4xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 4xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de> 
There was for long time no activity in the 4xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 4xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
powerpc, 5xxx, 512x: remove support for mpc5xxx and mpc512x 2017-06-16T14:14:55+00:00 Heiko Schocher hs@denx.de 2017-06-14T03:49:40+00:00 064b55cfcb25c0f7692ecf6d4a38f12cd82739f7 There was for long time no activity in the mpx5xxx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in mpc5xxx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de> 
There was for long time no activity in the mpx5xxx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in mpc5xxx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
board_f: fix calculation of reloc_off 2017-06-12T12:38:41+00:00 Lothar Waßmann LW@KARO-electronics.de 2017-06-08T08:18:25+00:00 53207bfd704250354c56aa74c7e96151fddee1f1 relocate_code() calculates the relocation offset wrt. the symbol __image_copy_start which happens to have the same value as CONFIG_TEXT_BASE on most systems. When creating an i.MX boot image with an integrated IVT it is convenient to have CONFIG_TEXT_BASE point to the start of the IVT that is prepended to the actual code. Thus CONFIG_TEXT_BASE will differ from __image_copy_start, while the calculation 'gd->relocaddr - __image_copy_start' still gives the right relocation offset. Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de> 
relocate_code() calculates the relocation offset wrt. the symbol
__image_copy_start which happens to have the same value as
CONFIG_TEXT_BASE on most systems.
When creating an i.MX boot image with an integrated IVT it is
convenient to have CONFIG_TEXT_BASE point to the start of the IVT
that is prepended to the actual code. Thus CONFIG_TEXT_BASE will
differ from __image_copy_start, while the calculation
'gd->relocaddr - __image_copy_start' still gives the right relocation
offset.

Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
board_f: Use IS_ENABLED instead of #ifdef in initf_bootstage() 2017-06-12T12:38:11+00:00 Simon Glass sjg@chromium.org 2017-06-07T16:28:46+00:00 baa7d345fb2a7aaee31af6d77f2a790e89864af6 The current implementation makes it look like the 'if (from_spl)' part is dead code because these features are not enabled for sandbox. We could enable it for sandbox_spl, but this is not done yet (it requires sharing memory between SPL and U-Boot proper which is in fact supported). It is probably nicer to avoid #ifdef anyway. Change it. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 163244) Fixes: 824bb1b (bootstage: Support SPL) 
The current implementation makes it look like the 'if (from_spl)' part is
dead code because these features are not enabled for sandbox. We could
enable it for sandbox_spl, but this is not done yet (it requires sharing
memory between SPL and U-Boot proper which is in fact supported).

It is probably nicer to avoid #ifdef anyway. Change it.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Coverity (CID: 163244)
Fixes: 824bb1b (bootstage: Support SPL)
edid: Use sizeof() in cea_is_hdmi_vsdb_present() 2017-06-12T12:38:06+00:00 Simon Glass sjg@chromium.org 2017-06-07T16:28:39+00:00 66a1b30d14566676293ba4010a0d592adc61ce95 We should not use an open-coded value here. Use sizeof() instead. Signed-off-by: Simon Glass <sjg@chromium.org> Reported-by: Coverity (CID: 163252) Fixes: 43c6bdd0 (edid: Add HDMI flag to timing info) 
We should not use an open-coded value here. Use sizeof() instead.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reported-by: Coverity (CID: 163252)
Fixes: 43c6bdd0 (edid: Add HDMI flag to timing info)
powerpc, 5xx: remove support for 5xx 2017-06-12T12:38:05+00:00 Heiko Schocher hs@denx.de 2017-06-07T15:33:11+00:00 502589777416aaee32e4ba1682c6eb3aa3a88e1c There was for long time no activity in the 5xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 5xx, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de> 
There was for long time no activity in the 5xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 5xx,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
powerpc, 8260: remove support for mpc8260 2017-06-12T12:38:02+00:00 Heiko Schocher hs@denx.de 2017-06-07T15:33:10+00:00 2eb48ff7a210ddd2a39bac23b3b9b39c60c32aef There was for long time no activity in the 8260 area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8260, so remove it. Signed-off-by: Heiko Schocher <hs@denx.de> 
There was for long time no activity in the 8260 area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8260,
so remove it.

Signed-off-by: Heiko Schocher <hs@denx.de>
powerpc, 8xx: remove support for 8xx 2017-06-12T12:37:55+00:00 Heiko Schocher hs@denx.de 2017-06-07T15:33:09+00:00 5b8e76c35ec312a3f73126bd1a2d2c0965b98a9f There was for long time no activity in the 8xx area. We need to go further and convert to Kconfig, but it turned out, nobody is interested anymore in 8xx, so remove it (with a heavy heart, knowing that I remove here the root of U-Boot). Signed-off-by: Heiko Schocher <hs@denx.de> 
There was for long time no activity in the 8xx area.
We need to go further and convert to Kconfig, but it
turned out, nobody is interested anymore in 8xx,
so remove it (with a heavy heart, knowing that I remove
here the root of U-Boot).

Signed-off-by: Heiko Schocher <hs@denx.de>