u-boot.git/common, branch v2020.01-rc1 Unnamed repository; edit this file 'description' to name the repository. spl: spl_mmc: fix getting raw_sect when boot from emmc boot partition 2019-10-29T02:09:44+00:00 Peng Fan peng.fan@nxp.com 2019-10-23T01:43:30+00:00 a335f80502131e9e2b58a0281f5fc78018295ea4 On i.MX8, when booting from eMMC boot partition, the whole flash.bin is stored in boot partition, however SPL switches to user partition during the init of mmc driver: spl_mmc_load() -> mmc_init() Then it tries to load the container image in spl_mmc_get_uboot_raw_sector(), but here it reads the data from user partition and the header is not recognized as a valid header. So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch to address this issue. Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch is not correct, so let's move it after eMMC partition switch. Reported-by: Anatolij Gustschin <agust@denx.de> Signed-off-by: Peng Fan <peng.fan@nxp.com> 
On i.MX8, when booting from eMMC boot partition, the whole flash.bin
is stored in boot partition, however SPL switches to user partition
during the init of mmc driver:
  spl_mmc_load() -> mmc_init()

Then it tries to load the container image in
spl_mmc_get_uboot_raw_sector(), but here it reads the data from user
partition and the header is not recognized as a valid header.

So we move spl_mmc_get_uboot_raw_sector after eMMC partition switch
to address this issue.

Anyway put spl_mmc_get_uboot_raw_sector before eMMC partition switch
is not correct, so let's move it after eMMC partition switch.

Reported-by: Anatolij Gustschin <agust@denx.de>
Signed-off-by: Peng Fan <peng.fan@nxp.com>
common: command: Fix manual relocation for repeatable command 2019-10-24T11:37:03+00:00 Michal Simek michal.simek@xilinx.com 2019-10-21T10:54:20+00:00 6f94daf9151e76f68a2a46d15862e232436a14e3 All platforms which are using MANUAL_RELOC are jumping back to origin location when repeatable command is called. The reason is that cmd_rep link is not updated properly. Issue can be reproduced by rewriting origin U-Boot location through (for example) file download by tftp command. Fixes: 80a48dd47e3b ("common: command: Rework the 'cmd is repeatable' logic") Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
All platforms which are using MANUAL_RELOC are jumping back to origin
location when repeatable command is called. The reason is that cmd_rep link
is not updated properly. Issue can be reproduced by rewriting origin
U-Boot location through (for example) file download by tftp command.

Fixes: 80a48dd47e3b ("common: command: Rework the 'cmd is repeatable' logic")
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
common: image-sig.c: Add manual relocation 2019-10-24T11:37:02+00:00 T Karthik Reddy t.karthik.reddy@xilinx.com 2019-03-16T09:53:03+00:00 1ed8c137304c8bd19eeadc98a376dfec9575ebe0 This patch adds manual relocation for struct checksum_algo & struct crypto_algo structures. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
This patch adds manual relocation for struct checksum_algo & struct
crypto_algo structures.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
common: hash: Manually relocate struct hash_algo 2019-10-24T11:37:02+00:00 T Karthik Reddy t.karthik.reddy@xilinx.com 2019-03-16T09:53:01+00:00 10088fb0373a0dc6f907f81279db004f5c35c4ea This patch adds manual relocation for struct hash_algo if CONFIG_NEEDS_MANUAL_RELOC is enabled. Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com> Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com> Signed-off-by: Michal Simek <michal.simek@xilinx.com> 
This patch adds manual relocation for struct hash_algo if
CONFIG_NEEDS_MANUAL_RELOC is enabled.

Signed-off-by: T Karthik Reddy <t.karthik.reddy@xilinx.com>
Signed-off-by: Siva Durga Prasad Paladugu <siva.durga.paladugu@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
spl: mmc: make eMMC HW boot partition configuration optional 2019-10-18T20:37:13+00:00 Anatolij Gustschin agust@denx.de 2019-10-18T19:38:33+00:00 32ded5022e5606fe1a1220ed5ea3e2f935da0fce Loading U-Boot on i.MX8QXP MEK board is broken since recent changes in spl_mmc: U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200) Normal Boot WDT: Not found! Trying to boot from MMC2_2 Load image from MMC/SD 0x46400 spl: mmc partition switch failed SPL: failed to boot from all boot devices ### ERROR ### Please RESET the board ### The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option is selected automatically and overrides the EXT_CSC_PART_CONFIG configurations with default value, always selecting the eMMC boot partition 1. Boards which place U-Boot image in other partitions became not bootable. Fix this by making the eMMC HW boot partition selection optional. Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition) Reviewed-by: Lukasz Majewski <lukma@denx.de> Signed-off-by: Anatolij Gustschin <agust@denx.de> 
Loading U-Boot on i.MX8QXP MEK board is broken since recent changes
in spl_mmc:

  U-Boot SPL 2019.10-00162-gff5bd397e4 (Oct 18 2019 - 15:50:45 +0200)
  Normal Boot
  WDT:   Not found!
  Trying to boot from MMC2_2
  Load image from MMC/SD 0x46400
  spl: mmc partition switch failed
  SPL: failed to boot from all boot devices
  ### ERROR ### Please RESET the board ###

The newly added CONFIG_SYS_MMCSD_RAW_MODE_EMMC_BOOT_PARTITION option
is selected automatically and overrides the EXT_CSC_PART_CONFIG
configurations with default value, always selecting the eMMC boot
partition 1. Boards which place U-Boot image in other partitions
became not bootable.

Fix this by making the eMMC HW boot partition selection optional.

Fixes: 17241ea0543a (spl: mmc: Add option to set eMMC HW boot partition)
Reviewed-by: Lukasz Majewski <lukma@denx.de>
Signed-off-by: Anatolij Gustschin <agust@denx.de>
image: android: Support boot image v1 and v2 2019-10-15T13:56:04+00:00 Sam Protsenko semen.protsenko@linaro.org 2019-08-15T17:25:07+00:00 bb63363f2a7fc8fb1767549698df9a22c661d169 In new versions of Android Boot Image next fields are added to the header (and corresponding payloads are added to the image itself): - v1: Recovery DTBO - v2: DTB Account for these new fields in next functions: 1. android_image_get_end(): as v1 and v2 have new payloads in the image, the calculation of image end address should be extended correspondingly; this is used e.g. by "bootm" command when booting the kernel from Android Boot Image 2. android_print_contents(): new fields values in v1 and v2 should be printed; the result of this function can be seen e.g. in "iminfo" command This commit doesn't add the means for working with new payloads in v1 and v2 images (it will be done in further commits), it only updates existing functions w.r.t. changes in boot image v1/v2. Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> 
In new versions of Android Boot Image next fields are added to the
header (and corresponding payloads are added to the image itself):
  - v1: Recovery DTBO
  - v2: DTB

Account for these new fields in next functions:
  1. android_image_get_end(): as v1 and v2 have new payloads in the
     image, the calculation of image end address should be extended
     correspondingly; this is used e.g. by "bootm" command when booting
     the kernel from Android Boot Image
  2. android_print_contents(): new fields values in v1 and v2 should be
     printed; the result of this function can be seen e.g. in "iminfo"
     command

This commit doesn't add the means for working with new payloads in v1
and v2 images (it will be done in further commits), it only updates
existing functions w.r.t. changes in boot image v1/v2.

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Merge tag 'mmc-10-10-2019' of https://gitlab.denx.de/u-boot/custodians/u-boot-mmc 2019-10-14T11:28:32+00:00 Tom Rini trini@konsulko.com 2019-10-14T11:28:32+00:00 fae79480111be47944cf66a9c052ff3934a09ce5 - Add sdhci driver for Broadcom iProc platform - Add a driver callback for power-cycle for mmc - Implement host_power_cycle callback for stm32_sdmmc2 - spl: dm_mmc: Initialize only the required mmc device 
- Add sdhci driver for Broadcom iProc platform
- Add a driver callback for power-cycle for mmc
- Implement host_power_cycle callback for stm32_sdmmc2
- spl: dm_mmc: Initialize only the required mmc device
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-x86 2019-10-12T14:52:48+00:00 Tom Rini trini@konsulko.com 2019-10-12T14:52:48+00:00 9189d6f1e9c4ae40a14558636ed7b59b53c4c885 - Remember the device being emulated for Sandbox PCI - Update Kconfig options for FSP 1.0 - Drop RESET_BASE and RESET_SEG_SIZE that are no longer used 
- Remember the device being emulated for Sandbox PCI
- Update Kconfig options for FSP 1.0
- Drop RESET_BASE and RESET_SEG_SIZE that are no longer used
Merge branch '2019-10-11-master-imports' 2019-10-12T14:10:59+00:00 Tom Rini trini@konsulko.com 2019-10-12T14:10:59+00:00 0c9cc5155cb5027ae17ace986f349e2f0d1fb9a3 - Assorted cleanups - FAT bugfixes - mediatek platform updates 
- Assorted cleanups
- FAT bugfixes
- mediatek platform updates
spl: Introduce SPL_DM_SPI Kconfig define 2019-10-11T19:33:27+00:00 Lukasz Majewski lukma@denx.de 2019-09-09T10:06:46+00:00 f18845c27ad86e118b074ce545ce685cb9a97561 This define indicates if DM_SPI shall be supported in SPL. This allows proper operation of DM converted SPI drivers in SPL, which use #if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted boards. Signed-off-by: Lukasz Majewski <lukma@denx.de> 
This define indicates if DM_SPI shall be supported in SPL. This allows
proper operation of DM converted SPI drivers in SPL, which use
#if !CONFIG_IS_ENABLED(DM_SPI) to also support not yet DM/DTS converted
boards.

Signed-off-by: Lukasz Majewski <lukma@denx.de>