u-boot.git/configs/CMPC885_defconfig, branch masterUnnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/configs/CMPC885_defconfig?h=master2024-10-08T15:28:10Zconfigs: Resync with savedefconfig2024-10-08T15:28:10ZTom Rinitrini@konsulko.com2024-10-08T15:18:32Zurn:sha1:d892702080d45468b4b5c1cbd3358705d182d4ef
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
board: cssi: add support for reading temperature2024-04-18T13:47:46ZChristophe Leroychristophe.leroy@csgroup.eu2024-04-02T17:22:24Zurn:sha1:57eb454392efe28156124efc825f6fcf6445c13c
All CSSI boards have an LM74 chip as temperature sensor.
Enable it.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
configs: Resync with savedefconfig2024-01-03T14:26:16ZTom Rinitrini@konsulko.com2024-01-03T14:26:16Zurn:sha1:42fb448a203197c84d71a5d8f83012c87c5c9a8b
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2023-10-02T17:58:20ZTom Rinitrini@konsulko.com2023-10-02T17:58:20Zurn:sha1:ec6f06bddc7f5a5f5d122a56707a10fc4e501b97
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig2023-10-02T14:35:27ZTom Rinitrini@konsulko.com2023-10-02T14:35:27Zurn:sha1:ba6d575ee0715b914ab31941e180c65ee097b22b
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
disable NFS support by default2023-07-14T19:21:07ZPeter Robinsonpbrobinson@gmail.com2023-06-14T14:41:10Zurn:sha1:10de1257079905ac383e7abf346a04221cafa620
While NFS is widely used in data centres, and private
networks it's quite a nuanced usecase for device firmware.
A lot of devices already disable it.
Various network protocols should really be opt in, not opt
out, because they add extra size and are potential attack
vectors from a security PoV. In the NFS case it doesn't
really make sense for a lot of devices like tables, SBCs etc.
It's also something we don't really want for SystemReady-IR
due to security concerns.
Signed-off-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
Reviewed-by: Ilias Apalodimas <ilias.apalodimas@linaro.org>
configs: Resync with savedefconfig2023-05-29T14:43:26ZTom Rinitrini@konsulko.com2023-05-29T14:43:26Zurn:sha1:c90e18932b4a1ea26db7726d3d0e1af97e2aad37
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>
board: cssi: Activate SMC relocation on CMPC885 board for MIAE device2023-05-05T05:26:53ZChristophe Leroychristophe.leroy@csgroup.eu2023-05-03T07:25:10Zurn:sha1:0ec8ebef87d78529d1b4f3e7beaced0b9fbea629
When CMPC885 board is used for MIAE device, SCC2 SCC3 and SMC2
are used for serial lines. Therefore only SCC4 is available for
handling the TDM line.
In order to use SCC4 in QMC mode without loosing SMC2, SMC2
must be relocated.
Activate SMC relocation and relocate SMC2 at offset 0x1fc0 which
is unused.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
board: cssi: Load CMPC885's motherboard FPGA earlier2023-05-04T08:58:07ZChristophe Leroychristophe.leroy@csgroup.eu2023-05-03T06:38:16Zurn:sha1:019b39b7366e5591949f6d41aeac474b632be704
In order to know the motherboard type earlier, perform I/O ports
initialisation and FPGA loading in board_early_init_f() instead
of board_early_init_r().
This is needed to be able to load mpc8xx CPM microcode base on
motherboard type and before starting to use the CPM.
Console is not available yet so remove the printfs.
Signed-off-by: Christophe Leroy <christophe.leroy@csgroup.eu>
configs: Resync with savedefconfig2023-05-01T15:50:26ZTom Rinitrini@konsulko.com2023-05-01T15:50:26Zurn:sha1:c960c0fd38be57abffb68996e53408ba5f675ee9
Rsync all defconfig files using moveconfig.py
Signed-off-by: Tom Rini <trini@konsulko.com>