u-boot.git/configs/difrnce_dit4350_defconfig, branch master

configs: Resync with savedefconfig

2026-01-06T15:13:29+00:00

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini

sunxi: Kconfig: Remove obsolete USBx_* pin symbols

2025-04-28T18:45:44+00:00

Now that the USB PHY driver uses the device tree to get the VBUS detect
and USB ID GPIOs, these Kconfig symbols are unused. Remove them from
their Kconfig definition, and also from all defconfig files.

Signed-off-by: Andre Przywara 
Acked-by: Jernej Skrabec

sunxi: Remove obsolete USBx_VBUS_PIN Kconfig symbols

2025-04-28T18:45:43+00:00

Now that the USB PHY driver uses the device tree to get VBUS supply
regulators, these Kconfig symbols are unused. Remove them.

Signed-off-by: Samuel Holland 
Signed-off-by: Andre Przywara 
Acked-by: Jernej Skrabec

sunxi: switch Allwinner A10s/A13 boards to OF_UPSTREAM

2025-01-22T22:49:15+00:00

In contrast to some other Allwinner SoCs, there is no difference between
the DTs for the Allwinner A10s/A13 SoCs (sun5i) between the U-Boot and the
Linux kernel repository.

Remove the old copies of the A10s/A13 related .dts and .dtsi files, and
switch most of sun5i boards over to use OF_UPSTREAM.

There are two boards for which we don't have DTs in the kernel tree.
Keep those two .dts files in the legacy U-Boot DT directory, and let
their defconfig opt out of OF_UPSTREAM.

Signed-off-by: Andre Przywara 
Acked-by: Sumit Garg

sunxi: remove CONFIG_MMC?_CD_PIN

2023-01-21T01:32:23+00:00

For legacy reasons we were defining the card detect GPIO for all sunxi
boards in each board's defconfig.
There is actually no need for a card-detect check in the SPL code (which
consequently has been removed already), and also in U-Boot proper we
have DM code to query the CD GPIO name from the device tree.

That means we don't have any user of that information left, so can
remove the definitions from the defconfigs.

Signed-off-by: Andre Przywara 
Reviewed-by: Samuel Holland 
Tested-by: Samuel Holland

sunxi: define SYS_MONITOR_LEN in Kconfig, not _defconfig

2022-12-13T20:33:31+00:00

Commit 08574ed339fb ("Convert CONFIG_SYS_MONITOR_LEN to Kconfig") moved
the definition of said config variable from the common sunxi header to
*every board's* defconfig.
This is a platform choice, not board specific, so remove the variable
from there, instead set the one value for all Allwinner boards in
Kconfig.

Signed-off-by: Andre Przywara 
Acked-by: Jernej Skrabec

Convert CONFIG_SYS_MONITOR_LEN to Kconfig

2022-11-10T15:08:55+00:00

This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

sunxi: defconfig: drop redundant definitions

2022-10-18T07:18:41+00:00

When some configuration symbols were converted from header files to
Kconfig, their values were placed into *every* defconfig file.
Since we now have sensible per-SoC defaults defined in Kconfig, those
values are now redundant, and can just be removed.
This affects CONFIG_SPL_STACK, CONFIG_SYS_PBSIZE, CONFIG_SPL_MAX_SIZE,
and CONFIG_SYS_BOOTM_LEN.

Signed-off-by: Andre Przywara

Convert CONFIG_SPL_STACK to Kconfig

2022-06-06T16:09:27+00:00

This converts the following to Kconfig:
   CONFIG_SPL_STACK

Signed-off-by: Tom Rini

Convert CONFIG_SYS_PBSIZE to Kconfig

2022-06-06T16:09:00+00:00

This converts the following to Kconfig:
   CONFIG_SYS_PBSIZE

Signed-off-by: Tom Rini