u-boot.git/configs/mx6cuboxi_defconfig, branch next Unnamed repository; edit this file 'description' to name the repository. sata: Rework the CMD_SATA and SATA symbols 2026-04-03T18:06:14+00:00 Tom Rini trini@konsulko.com 2026-03-20T20:53:24+00:00 d05ef0f258c960c912bfaff2ccad8d7c4c6f35a9 Today we typically enable CMD_SATA in order to have the SATA functionality itself enabled, despite there being a clean split between the two symbols. This in turn leads to potential configuration problems. Split things so that SATA continues to be separate and not CMD_SATA instead depends, functionally, on AHCI being enabled. To do all of this: - Have X86 select AHCI directly rather than "default y" it later. - Make CMD_SATA be a default y option, given the split of platforms that enabled SATA and did, or did not, enable CMD_SATA. - Change "imply CMD_SATA" to "imply SATA" - Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL without PCI (and in turn, SATA is needed for SATA_SIL). - Update a number of defconfigs to have no functional change. Signed-off-by: Tom Rini <trini@konsulko.com> 
Today we typically enable CMD_SATA in order to have the SATA
functionality itself enabled, despite there being a clean split between
the two symbols. This in turn leads to potential configuration problems.
Split things so that SATA continues to be separate and not CMD_SATA
instead depends, functionally, on AHCI being enabled.

To do all of this:
- Have X86 select AHCI directly rather than "default y" it later.
- Make CMD_SATA be a default y option, given the split of platforms that
  enabled SATA and did, or did not, enable CMD_SATA.
- Change "imply CMD_SATA" to "imply SATA"
- Correct TARGET_VEXPRESS64_JUNO because you cannot select SATA_SIL
  without PCI (and in turn, SATA is needed for SATA_SIL).
- Update a number of defconfigs to have no functional change.

Signed-off-by: Tom Rini <trini@konsulko.com>
env: Rename SYS_RELOC_GD_ENV_ADDR to ENV_RELOC_GD_ENV_ADDR 2025-06-20T18:15:08+00:00 Marek Vasut marek.vasut+renesas@mailbox.org 2025-06-09T19:26:38+00:00 123682c7651d187113455cb01d396825c08619c4 Rename the variable and add ENV_ prefix, so that all configuration options which are related to environment would have an CONFIG_ENV_ prefix. No functional change. Reviewed-by: Tom Rini <trini@konsulko.com> Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org> 
Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>
ARM: imx: soc: Select default TEXT_BASE for i.MX6 2024-10-25T23:21:15+00:00 Marek Vasut marex@denx.de 2024-10-20T21:00:38+00:00 304eb6ceea401079050136e7dae8e49e6b615e68 Select default U-Boot and SPL text base for the i.MX6 SoC. The U-Boot and SPL text base is picked as the one used by various i.MX6 boards. Update all the boards. Signed-off-by: Marek Vasut <marex@denx.de> Reviewed-by: Peng Fan <peng.fan@nxp.com> Reviewed-by: Tom Rini <trini@konsulko.com> 
Select default U-Boot and SPL text base for the i.MX6 SoC. The U-Boot
and SPL text base is picked as the one used by various i.MX6 boards.
Update all the boards.

Signed-off-by: Marek Vasut <marex@denx.de>
Reviewed-by: Peng Fan <peng.fan@nxp.com>
Reviewed-by: Tom Rini <trini@konsulko.com>
mx6cuboxi: Do not print devicetree model 2024-04-05T12:37:56+00:00 Fabio Estevam festevam@gmail.com 2024-03-30T21:03:31+00:00 3952365515c32cd8b3990afb9bd77a4f4cba4159 The mx6cuboxi_defconfig target supports several board variants. All of these variants use the hummingboard devicetree in U-Boot. Currently, the devicetree model as well as the board variant name are shown: ... Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc) Board: MX6 Cubox-i ... Printing the devicetree model that is used internally by U-Boot may confuse users. Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the board name is printed in board_late_init() instead. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Christian Gmeiner <cgmeiner@igalia.com> 
The mx6cuboxi_defconfig target supports several board
variants. All of these variants use the hummingboard devicetree in U-Boot.

Currently, the devicetree model as well as the board variant name
are shown:

...
Model: SolidRun HummingBoard2 Dual/Quad (1.5som+emmc)
Board: MX6 Cubox-i
...

Printing the devicetree model that is used internally by U-Boot
may confuse users.

Unselect the CONFIG_DISPLAY_BOARDINFO option so that only the
board name is printed in board_late_init() instead.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
mx6cuboxi: Convert to watchdog driver model 2024-03-30T12:49:53+00:00 Fabio Estevam festevam@gmail.com 2024-03-27T14:18:49+00:00 fc07cac02adebc87b69cd82f6ca6f0283d11cd5a Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused the 'reset' command in U-Boot to not cause a board reset. Fix it by switching to the watchdog driver model via sysreset, which is the preferred method for implementing the watchdog reset. Signed-off-by: Fabio Estevam <festevam@gmail.com> Tested-by: Christian Gmeiner <cgmeiner@igalia.com> 
Commit 68dcbdd594d4 ("ARM: imx: Add weak default reset_cpu()") caused
the 'reset' command in U-Boot to not cause a board reset.

Fix it by switching to the watchdog driver model via sysreset, which
is the preferred method for implementing the watchdog reset.

Signed-off-by: Fabio Estevam <festevam@gmail.com>
Tested-by: Christian Gmeiner <cgmeiner@igalia.com>
configs: Resync with savedefconfig 2024-01-03T14:26:16+00:00 Tom Rini trini@konsulko.com 2024-01-03T14:26:16+00:00 42fb448a203197c84d71a5d8f83012c87c5c9a8b Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
spl: Use CONFIG_SPL... instead of CONFIG_..._SPL_... 2023-10-06T18:38:11+00:00 Simon Glass sjg@chromium.org 2023-09-26T14:14:16+00:00 82e26e0d6883673bdedbcdb0ddd4bc967ce6ce70 We like to put the SPL first so it is clear that it relates to SPL. Rename various malloc-related options which have crept in, to stick to this convention. Signed-off-by: Simon Glass <sjg@chromium.org> Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com> Reviewed-by: Martyn Welch <martyn.welch@collabora.com> Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com> 
We like to put the SPL first so it is clear that it relates to SPL. Rename
various malloc-related options which have crept in, to stick to this
convention.

Signed-off-by: Simon Glass <sjg@chromium.org>
Reviewed-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
Reviewed-by: Martyn Welch <martyn.welch@collabora.com>
Reviewed-by: Svyatoslav Ryhel <clamor95@gmail.com>
configs: Resync with savedefconfig 2023-10-02T17:58:20+00:00 Tom Rini trini@konsulko.com 2023-10-02T17:58:20+00:00 ec6f06bddc7f5a5f5d122a56707a10fc4e501b97 Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig 2023-05-29T14:43:26+00:00 Tom Rini trini@konsulko.com 2023-05-29T14:43:26+00:00 c90e18932b4a1ea26db7726d3d0e1af97e2aad37 Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
configs: Resync with savedefconfig 2023-03-27T17:39:17+00:00 Tom Rini trini@konsulko.com 2023-03-27T17:39:17+00:00 c358af81d0df0ba5eadda585577425345dae55ed Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 
Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>