u-boot.git/configs/phycore_am62ax_a53_defconfig, branch master Unnamed repository; edit this file 'description' to name the repository. configs: phycore_am6xx_a53_defconfig: Enable CMD_DDR4 2026-01-21T15:17:17+00:00 Wadim Egorov w.egorov@phytec.de 2026-01-13T05:35:29+00:00 3396e7d4aae81717a455a6427f4a218b2c99e408 Enable command for verifying DDRSS inline ECC features. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> 
Enable command for verifying DDRSS inline ECC features.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
spl: Kconfig: k3: Set common default for SPL_LOAD_FIT(_ADDRESS) 2025-12-31T16:13:01+00:00 Andrew Davis afd@ti.com 2025-12-08T19:06:35+00:00 dc1c7526b1cb64526601d81f70a87f57aeac1e9a These are common for all K3 based boards. Add the common values as defaults and remove from each board defconfig Signed-off-by: Andrew Davis <afd@ti.com> Reviewed-by: Bryan Brattlof <bb@ti.com> 
These are common for all K3 based boards. Add the common values as
defaults and remove from each board defconfig

Signed-off-by: Andrew Davis <afd@ti.com>
Reviewed-by: Bryan Brattlof <bb@ti.com>
configs: Resync with savedefconfig 2025-10-27T15:57:45+00:00 Tom Rini trini@konsulko.com 2025-10-27T15:57:45+00:00 f17f11880a16f214aef8f8b8bbb4958ff2cfcc7c Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini <trini@konsulko.com> 
Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>
Merge patch series "configs: phycore_am62ax_r5_defconfig: eMMC boot from raw offsets" 2025-09-19T17:57:00+00:00 Tom Rini trini@konsulko.com 2025-09-19T17:57:00+00:00 31eee7d42b44ad7d0bad320461ba0c14750a61d9 This series from Wadim Egorov <w.egorov@phytec.de> changes the phycore_am62ax platform to use raw offsets for eMMC boot. Link: https://lore.kernel.org/r/20250909103654.3341398-1-w.egorov@phytec.de 
This series from Wadim Egorov <w.egorov@phytec.de> changes the
phycore_am62ax platform to use raw offsets for eMMC boot.

Link: https://lore.kernel.org/r/20250909103654.3341398-1-w.egorov@phytec.de
configs: phycore_am62ax_a53_defconfig: eMMC boot from raw offsets 2025-09-19T17:56:52+00:00 Daniel Schultz d.schultz@phytec.de 2025-09-09T10:36:54+00:00 be5715f9aa93341fb01f870af596bfa37e137b91 Enable CONFIG_SPL_SYS_MMCSD_RAW_MODE and set the offset address to boot from raw addresses instead of a FAT partition. Signed-off-by: Daniel Schultz <d.schultz@phytec.de> Signed-off-by: Wadim Egorov <w.egorov@phytec.de> Acked-by: Anshul Dalal <anshuld@ti.com> 
Enable CONFIG_SPL_SYS_MMCSD_RAW_MODE and set the offset address to
boot from raw addresses instead of a FAT partition.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
Acked-by: Anshul Dalal <anshuld@ti.com>
Merge patch series "Update SoM detection related code and configs" 2025-08-26T20:37:02+00:00 Tom Rini trini@konsulko.com 2025-08-26T18:49:35+00:00 b4ae2926068a96264a88311647189dd8dcf28585 Wadim Egorov <w.egorov@phytec.de> says: Update Kconfig options for phyCORE-AM62Ax to align with other boards and prepare common board code for the upcoming phyCORE-AM62L which has the SoM EEPROM connected on a different bus. Link: https://lore.kernel.org/r/20250815111051.2277173-1-w.egorov@phytec.de 
Wadim Egorov <w.egorov@phytec.de> says:

Update Kconfig options for phyCORE-AM62Ax to align with other boards and
prepare common board code for the upcoming phyCORE-AM62L which has the
SoM EEPROM connected on a different bus.

Link: https://lore.kernel.org/r/20250815111051.2277173-1-w.egorov@phytec.de
configs: phycore_am62ax_a53_defconfig: Resync after savedefconfig 2025-08-26T18:49:21+00:00 Wadim Egorov w.egorov@phytec.de 2025-08-15T11:10:51+00:00 7e86c8f1dc1dceb50294902f95b3ecf21f8af687 Remove PHYTEC_SOM_DETECTION_BLOCKS after it was enabled per default for this platform. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> 
Remove PHYTEC_SOM_DETECTION_BLOCKS after it was enabled per default
for this platform.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
board: phytec: phycore-am62ax: Add watchdog start to bootcmd 2025-08-11T20:53:56+00:00 Wadim Egorov w.egorov@phytec.de 2025-07-30T15:42:16+00:00 cc6291e3b4a4a8520a3c4bb44eae2ecd8f1e9c0e Allows run-time control over watchdog auto-start and the timeout via setting the environment variable watchdog_timeout_ms. A value of zero means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value. Users can enable the watchdog to monitor the boot process until userspace or OS takes over to serve the watchdog. Signed-off-by: Wadim Egorov <w.egorov@phytec.de> 
Allows run-time control over watchdog auto-start and the timeout via
setting the environment variable watchdog_timeout_ms. A value of zero
means "do not start". Use CONFIG_WATCHDOG_TIMEOUT_MSECS as initial value.
Users can enable the watchdog to monitor the boot process until userspace
or OS takes over to serve the watchdog.

Signed-off-by: Wadim Egorov <w.egorov@phytec.de>
treewide: Remove empty board_init() function from all boards 2025-07-24T19:30:19+00:00 Sam Protsenko semen.protsenko@linaro.org 2025-07-17T02:44:26+00:00 70a4d1fa1ddb2f5f8f9a27442563f182549abbb5 Commit 86acdce2ba88 ("common: add config for board_init() call") introduced CONFIG_BOARD_INIT option. This option can be disabled for the boards where board_init() function is not needed. Remove empty board_init() calls for all boards where it's possible, and disable CONFIG_BOARD_INIT in all related defconfigs. This cleanup was made semi-automatically using these scripts: [1]. No functional change, but the binary size for the modified boards is reduced a bit. [1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org> Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon Tested-by: Bryan Brattlof <bb@ti.com> Acked-by: Peng Fan <peng.fan@nxp.com> #NXP boards 
Commit 86acdce2ba88 ("common: add config for board_init() call")
introduced CONFIG_BOARD_INIT option. This option can be disabled for the
boards where board_init() function is not needed. Remove empty
board_init() calls for all boards where it's possible, and disable
CONFIG_BOARD_INIT in all related defconfigs.

This cleanup was made semi-automatically using these scripts: [1].

No functional change, but the binary size for the modified boards is
reduced a bit.

[1] https://github.com/joe-skb7/uboot-convert-scripts/tree/master/remove-board-init

Signed-off-by: Sam Protsenko <semen.protsenko@linaro.org>
Tested-by: Adam Ford <aford173@gmail.com> #imx8mm_beacon
Tested-by: Bryan Brattlof <bb@ti.com>
Acked-by: Peng Fan <peng.fan@nxp.com>  #NXP boards
Merge patch series "malloc size cleanup for K3 devices" 2025-06-26T21:54:36+00:00 Tom Rini trini@konsulko.com 2025-06-26T19:55:24+00:00 45d951d46699a958a6c87d281af2904fea8a482c Udit Kumar <u-kumar1@ti.com> says: Many boards based upon K3 ARCH overrides default malloc size to 32MB, as part of cleanup, add default size of 32MB for K3 ARCH. Link: https://lore.kernel.org/r/20250614093717.2479920-1-u-kumar1@ti.com 
Udit Kumar <u-kumar1@ti.com> says:

Many boards based upon K3 ARCH overrides default malloc size to 32MB,
as part of cleanup, add default size of 32MB for K3 ARCH.

Link: https://lore.kernel.org/r/20250614093717.2479920-1-u-kumar1@ti.com