u-boot.git/configs/pine64_plus_defconfig, branch master

sunxi: A64: drop boot0 header reservation

2023-04-11T23:17:22+00:00

In the early days of the Allwinner A64 U-Boot support, we relied on a
vendor provided "boot0" binary to perform the DRAM initialisation. This
replaced the SPL, and required to equip the U-Boot (proper) binary with
a vendor specific header to be recognised as a valid boot0 payload.
Fortunately these days are long gone (we gained SPL and DRAM support in
early 2017!), and we never needed to use that hack on any later 64-bit
Allwinner SoC.

Since this is highly obsolete by now, remove that option from the
defconfigs of all A64 boards. We leave the code still in here for now,
since some people expressed their interest in this.

Signed-off-by: Andre Przywara 
Reviewed-by: Jernej Skrabec

sunxi: define SYS_MONITOR_LEN in Kconfig, not _defconfig

2022-12-13T20:33:31+00:00

Commit 08574ed339fb ("Convert CONFIG_SYS_MONITOR_LEN to Kconfig") moved
the definition of said config variable from the common sunxi header to
*every board's* defconfig.
This is a platform choice, not board specific, so remove the variable
from there, instead set the one value for all Allwinner boards in
Kconfig.

Signed-off-by: Andre Przywara 
Acked-by: Jernej Skrabec

Convert CONFIG_SYS_MONITOR_LEN to Kconfig

2022-11-10T15:08:55+00:00

This converts the following to Kconfig:
   CONFIG_SYS_MONITOR_LEN

To do this, we set a default of 0 for everyone because there are a
number of cases where we define CONFIG_SYS_MONITOR_LEN but the only
impact is that we set TOTAL_MALLOC_LEN to be CONFIG_SYS_MALLOC_LEN +
CONFIG_ENV_SIZE, so we must continue to allow all boards to set this
value. Update the SPL code to use 200 KB as the default raw U-Boot size
directly, if we don't have a real CONFIG_SYS_MONITOR_LEN value.

Signed-off-by: Tom Rini 
Reviewed-by: Simon Glass

sunxi: defconfig: drop redundant definitions

2022-10-18T07:18:41+00:00

When some configuration symbols were converted from header files to
Kconfig, their values were placed into *every* defconfig file.
Since we now have sensible per-SoC defaults defined in Kconfig, those
values are now redundant, and can just be removed.
This affects CONFIG_SPL_STACK, CONFIG_SYS_PBSIZE, CONFIG_SPL_MAX_SIZE,
and CONFIG_SYS_BOOTM_LEN.

Signed-off-by: Andre Przywara

Convert CONFIG_SYS_BOOTM_LEN to Kconfig

2022-07-07T18:01:09+00:00

This converts the following to Kconfig:
   CONFIG_SYS_BOOTM_LEN

As part of this, rework error handling in boot/bootm.c so that we pass
the buffer size to handle_decomp_error as CONFIG_SYS_BOOTM_LEN will not
be available to host tools but we do know the size that we passed to
malloc().

Cc: Soeren Moch 
Signed-off-by: Tom Rini

Convert CONFIG_SPL_STACK to Kconfig

2022-06-06T16:09:27+00:00

This converts the following to Kconfig:
   CONFIG_SPL_STACK

Signed-off-by: Tom Rini

Convert CONFIG_SYS_PBSIZE to Kconfig

2022-06-06T16:09:00+00:00

This converts the following to Kconfig:
   CONFIG_SYS_PBSIZE

Signed-off-by: Tom Rini

net: phy: realtek: Add tx/rx delay config for 8211e

2021-11-23T07:57:56+00:00

Some boards need to change the tx/rx delay config in order for
gigabit Ethernet to work.

In Linux commit bbc4d71d6354 ("net: phy: realtek: fix rtl8211e rx/tx
delay config"), Realtek documented the bits for overriding the delays
from the hardware straps.

Copy the logic from linux, so the delay config is set from the PHY's
interface type (the phy-mode property in the device tree).

This removes the need for a one-off workaround for the Pine A64+ board.

Signed-off-by: Samuel Holland 
Reviewed-by: Ramon Fried

configs: Resync with savedefconfig

2021-06-28T14:17:29+00:00

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2020-07-28T12:46:52+00:00

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini