u-boot.git/configs/qcom_defconfig, branch next

qcom_defconfig: Enable SC7180 GCC

2026-08-07T12:47:08Z

Enable Generic Clock Controller for SC7180 in qcom_defconfig. Signed-off-by: Vitalii Skorkin Signed-off-by: Erikas Bitovtas Reviewed-by: Casey Connolly Link: https://patch.msgid.link/20260621-sm7125-support-v1-3-5ad69a39781a@gmail.com Signed-off-by: Casey Connolly

configs: qcom_defconfig: Limit MMC transfer size to prevent controller timeout

2026-08-07T12:47:08Z

Set CONFIG_SYS_MMC_MAX_BLK_COUNT to 16384 blocks to limit the maximum transfer size per operation. This prevents controller timeouts. Signed-off-by: Balaji Selvanathan Reviewed-by: Sumit Garg Link: https://patch.msgid.link/20260421-emmc-v2-3-0ebd3322b676@oss.qualcomm.com Signed-off-by: Casey Connolly

mach-snapdragon: Kconfig: changes / additions to support SPL

2026-08-07T12:47:08Z

Select SUPPORT_SPL so SPL build can be enabled, disable SYSRESET_PSCI in SPL. (SPL runs in EL3, so if SPL itself doesn't provide PSCI, nothing else will.) Also select (SPL_)OF_LIVE and (SPL_)EVENT, which are needed to fix up upstream dt to make usb work, and in general don't make sense to disable in SPL as long as we're not running out of SRAM. Mirror u-boot proper selections like GPIO and pinctrl to ensure consistent behavior, and select SPL_SPRINTF, SPL_LIBCOMMON_SUPPORT etc for similar reasons. Signed-off-by: Michael Srba Reviewed-by: Simon Glass Reviewed-by: Casey Connolly Link: https://patch.msgid.link/20260521-qcom_spl-v9-7-c108ebe8ff4e@seznam.cz [casey: kconfig fixes, remove stub ft_board_setup and disable OF_BOARD_SETUP] Signed-off-by: Casey Connolly

Merge branch 'next'

2026-07-07T00:26:12Z

drivers: sysreset: revert support for args in request

2026-07-03T19:45:58Z

This reverts: - commit e49c84f7bb7b ("doc: usage: cmd: reset: specify when the -edl option is available") - commit 1076feb8a3f9 ("cmd: boot: fix edl being shown when not supported") - commit 63c806ba0e12 ("qcom_defconfig: enable psci based sysreset") - commit ef06c5d76ff4 ("cmd: boot: Add '-edl' option to reset command documentation") - commit 32825eaddc37 ("sysreset: Implement PSCI based reset to EDL mode for QCOM SoCs") - commit fcb48b89813b ("drivers: sysreset: Add sysreset op that can take arguments") There was a conflict reverting commit 63c806ba0e12 ("qcom_defconfig: enable psci based sysreset") due to commit 02ef1859b44f ("configs: Resync with savedefconfig"), but the conflict resolution was trivial. The args support for the sysreset uclass contains a logic bug. The first sysreset device implementing the request_arg callback will consume the args, not support the specified arg and thus return -EPROTONOSUPPORT which will stop the iteration over all sysreset devices. This is an issue if one has multiple sysreset devices and each with support for different (valid) args. If a sysreset device implements a -dummy argument and another -foo and a user calls reset -dummy from the U-Boot CLI, it'll depend on which sysreset device will be attempted first. If it is the one implementing -foo, it'll return it doesn't support the argument with -EPROTONOSUPPORT in which case the device implementing -dummy will never be attempted and instead we'll do a cold reset which is very likely not what's expected from the user. Casey suggested[1] we revert this and start from scratch again with a different implementation instead. [1] https://lore.kernel.org/u-boot/77ff0f56-5c3b-42e7-bdd1-bf90296da900@linaro.org/ Acked-by: Casey Connolly Signed-off-by: Quentin Schulz

board/qualcomm: qcom-phone: Add poweroff command

2026-05-18T09:06:53Z

This command helps to shutdown the device directly from serial command line. Or, the phone has to be booted into recovery mode to power off. Signed-off-by: Biswapriyo Nath Link: https://patch.msgid.link/20260515-ufs-sm61x5-v2-3-0a35d083d2da@gmail.com Signed-off-by: Casey Connolly

qcom_defconfig: Enable SM6125 clock driver

2026-05-18T09:04:14Z

Enable the driver so that SM6125 devices can boot with qcom_defconfig. Signed-off-by: Biswapriyo Nath Reviewed-by: Casey Connolly soc98: input: 1 [x] mmc@4784000.cd-gpios soc98: input: 0 [x] mmc@4784000.cd-gpios Link: https://patch.msgid.link/20260204-sm6125-clk-pinctrl-v1-2-9cf4c556557a@gmail.com Signed-off-by: Casey Connolly

configs: Resync with savedefconfig

2026-05-11T18:26:03Z

Resync all defconfig files using qconfig.py Signed-off-by: Tom Rini

qcom_defconfig: Disable EFI_HAVE_RUNTIME_RESET in qcom_defconfig

2026-04-27T10:38:45Z

Qualcomm platforms rely on the kernel to manage specialized reboot modes such as EDL, bootloader entry, and other vendor-specific reset flows. Allowing U-Boot to override these via EFI runtime reset services leads to incorrect behavior when the kernel issues advanced reboot requests. Now that EFI_HAVE_RUNTIME_RESET is exposed as a user-configurable Kconfig option, disable it for qcom_defconfig so that the kernel retains full control over reboot handling on Qualcomm SoCs. This ensures that EFI runtime reboot callbacks are not registered on these platforms, preventing conflicts with kernel-managed PSCI reset paths. Signed-off-by: Aswin Murugan Reviewed-by: Sumit Garg Acked-by: Heinrich Schuchardt Reviewed-by: Ilias Apalodimas Link: https://patch.msgid.link/20260324175913.92858-3-aswinm@qti.qualcomm.com Signed-off-by: Casey Connolly

qcom_defconfig: Enable Milos clock driver

2026-04-27T10:38:44Z

Enable the driver so that Milos devices can boot with qcom_defconfig. Reviewed-by: Sumit Garg Signed-off-by: Luca Weiss Link: https://patch.msgid.link/20260318-milos-bringup-v2-6-650b91dd75d8@fairphone.com Signed-off-by: Casey Connolly