Enable LED_BOOT to use led_boot_on/off() API in board file.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Quentin Schulz <quentin.schulz@cherry.de>

Resync all defconfig files using qconfig.py

Signed-off-by: Tom Rini <trini@konsulko.com>

On STM32MP reference boards, the watchdog is started by a previous
boot stage (e.g. bootrom or secure OS), so the config flag
WATCHDOG_AUTOSTART is not required.
It's preferable to rely on the DT properties "u-boot,autostart" or
"u-boot,noautostart", if needed.

For backward compatibility on defconfigs that are based on SPL,
thus cannot rely on a previous boot stage for starting the
watchdog, enable WATCHDOG_AUTOSTART in their respective defconfig.
The change in stm32mp15_dhsom.config is propagated to:
- configs/stm32mp15_dhcom_basic.config
- configs/stm32mp15_dhcor_basic.config
and then to:
- stm32mp15_dhcom_basic_defconfig
- stm32mp15_dhcom_drc02_basic_defconfig
- stm32mp15_dhcom_pdk2_basic_defconfig
- stm32mp15_dhcom_picoitx_basic_defconfig
- stm32mp15_dhcor_avenger96_basic_defconfig
- stm32mp15_dhcor_basic_defconfig
- stm32mp15_dhcor_drc_compact_basic_defconfig
- stm32mp15_dhcor_testbench_basic_defconfig

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Signed-off-by: Antonio Borneo <antonio.borneo@foss.st.com>
Reviewed-by: Patrice Chotard <patrice.chotard@foss.st.com>

Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.

Use ENV_MMC_DEVICE_INDEX to clarify this is the SD/MMC device
index, a number, as enumerated by U-Boot. Update the help text
accordingly.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.

Reviewed-by: Tom Rini <trini@konsulko.com>
Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Rename the variable and add ENV_ prefix, so that all configuration
options which are related to environment would have an CONFIG_ENV_
prefix. No functional change.

Signed-off-by: Marek Vasut <marek.vasut+renesas@mailbox.org>

Enable OF_UPSTREAM flag for STM32MP15 platforms, except for
stm32mp15-odyssey,see following patch :

"configs: stm32: introduce stm32mp15-odyssey_defconfig"

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

At present there is a hex value SPL_STACK which both determines whether
SPL has its own initial stack and the hex value of that stack.

Split off the former into SPL_HAVE_INIT_STACK with SPL_STACK depending
on that and only providing the latter.

Signed-off-by: Simon Glass <sjg@chromium.org>
[trini: Resync defconfig files]

In arch/arm/mach-stm32mp/cmd_stm32prog/stm32prog.c, in init_device(),
in case of RAW_IMAGE, part->size = block_dev->lba * block_dev->blksz.

  _ part->size is declared as u64.
  _ block_dev->lba is declared as lbaint_t which is uint64_t
    if CONFIG_SYS_64BIT_LBA is enable, otherwise ulong.
  _ block_dev->blksz is declared as unsigned long.

For example, in case block_dev->lba = 0x1dacc00, block_dev->blksz = 0x200
then part->size 0x5980000 which is incorrect as both are declared as ulong.

To fix this overflow issue, enable CONFIG_SYS_64BIT_LBA, block_dev->lba is
then declared as uint64_t and part->size get the correct value 0x3b5980000.

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>

Restore boot SPL from sdcard for STM32MP1 platforms.

Fixes: 2a00d73d081a ("spl: mmc: Try to clean up raw-mode options")

Signed-off-by: Patrice Chotard <patrice.chotard@foss.st.com>
Reviewed-by: Patrick Delaunay <patrick.delaunay@foss.st.com>