u-boot.git/configs/theadorable_debug_defconfig, branch u-boot-2016.09.y

Revert "Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL"

2016-09-19T14:42:32+00:00

This increase is too large and causes other problems, and we're still
discussing things.

This reverts commit 90c08d9e08c7a108ab904f3bbdeb558081757892.

Signed-off-by: Tom Rini

configs: Resync with savedefconfig

2016-09-09T13:51:28+00:00

Signed-off-by: Tom Rini

Increase default of CONFIG_SYS_MALLOC_F_LEN for SPL_OF_CONTROL

2016-09-07T12:48:58+00:00

If both SPL_DM and SPL_OF_CONTROL are enabled, SPL needs to bind
several devices, but CONFIG_SYS_MALLOC_F_LEN=0x400 is apparently
not enough.  Increase the default to 0x2000 for the case.  This
will be helpful for shorter defconfigs.

Signed-off-by: Masahiro Yamada 
Reviewed-by: Stefan Roese 
Reviewed-by: Simon Glass

common: bootdelay: move CONFIG_BOOTDELAY into a Kconfig option

2016-06-09T17:53:05+00:00

move CONFIG_BOOTDELAY into a Kconfig option. Used for this
purpose the moveconfig.py tool in tools.

Signed-off-by: Heiko Schocher 

Reviewed-by: Tom Rini 
Acked-by: Viresh Kumar 
Acked-by: Igor Grinberg

configs: Re-sync with cmd/Kconfig

2016-04-25T19:09:47+00:00

Update the config.h and defconfig files for the commands that 8e3c036
converted over to Kconfig

Signed-off-by: Tom Rini

configs: Re-sync almost all of cmd/Kconfig

2016-04-25T19:09:40+00:00

This syncs up the current cmd/Kconfig and include/configs/ files with the
only exception being CMD_NAND.  Due to how we have used this historically
we need to take further care here when converting.

Signed-off-by: Tom Rini

configs: Re-sync HUSH options

2016-04-25T18:22:43+00:00

Move all cases of CONFIG_SYS_HUSH_PARSER out of the config.h files.  Remove
all cases of CONFIG_SYS_PROMPT_HUSH_PS2 as everyone uses the default.

Signed-off-by: Tom Rini

arm: mvebu: theadorable: Add StratixV FPGA programming support

2016-03-24T08:48:34+00:00

This patch adds support for Altera StratixV bitstream programming. 2 FPGAs
are connected to the SPI busses. This patch uses board specific write
code to program the bitstream via SPI direct write mode.

Signed-off-by: Stefan Roese 
Cc: Luka Perkov 
Signed-off-by: Stefan Roese

Kconfig: Move CONFIG_FIT and related options to Kconfig

2016-03-14T23:18:07+00:00

There are already two FIT options in Kconfig but the CONFIG options are
still in the header files. We need to do a proper move to fix this.

Move these options to Kconfig and tidy up board configuration:

   CONFIG_FIT
   CONFIG_OF_BOARD_SETUP
   CONFIG_OF_SYSTEM_SETUP
   CONFIG_FIT_SIGNATURE
   CONFIG_FIT_BEST_MATCH
   CONFIG_FIT_VERBOSE
   CONFIG_OF_STDOUT_VIA_ALIAS
   CONFIG_RSA

Unfortunately the first one is a little complicated. We need to make sure
this option is not enabled in SPL by this change. Also this option is
enabled automatically in the host builds by defining CONFIG_FIT in the
image.h file. To solve this, add a new IMAGE_USE_FIT #define which can
be used in files that are built on the host but must also build for U-Boot
and SPL.

Note: Masahiro's moveconfig.py script is amazing.

Signed-off-by: Simon Glass 
[trini: Add microblaze change, various configs/ re-applies]
Signed-off-by: Tom Rini

arm: mvebu: Add support for the Armada XP theadorable board

2016-01-27T06:45:43+00:00

This patch adds support for the Armada XP (MV78260) based theadorable
board. Its equipped with onboard DDR3, UART, ethernet, I2C, SPI NOR,
LCD and SATA (SSD) interfaces / devices.

Two defconfigs are added:

theadorable_defconfig:
The production U-Boot version with a stripped down drivers and feature
list. This removes networking, USB and PCI support.

theadorable_debug_defconfig:
The debugging / testing U-Boot version with full support for all drivers.

Signed-off-by: Stefan Roese 
Cc: Luka Perkov 
Signed-off-by: Stefan Roese