u-boot.git/configs/x96_mate_defconfig, branch master

sunxi: h616: defconfigs: enable eMMC

2025-04-28T18:45:43+00:00

Now that eMMC is working properly on H616 devices, it became apparent
that some boards were missing the right defconfig bits to enable eMMC
access.

Add the eMMC device number to the Tanix TX1 and the X96 Mate defconfig,
also the eMMC boot option to the TX1. Oddly enough the X96 Mate had
just this bit already.

Signed-off-by: Andre Przywara 
Reviewed-by: Jernej Skrabec

sunxi: H616: DRAM: rename Kconfig parameters to be more generic

2025-01-22T22:44:34+00:00

The H616 DRAM controller requires some board specific parameters, which
we declare in Kconfig, let each board specify in their defconfig, and
then use in the DRAM init code.

Other DRAM controllers now require a very similar, if not identical
parameter set, with so far the same parameter names used.

To help keep the Kconfig file at bay, rename the existing parameter
names to drop the H616_ part in there, to make them more naturally
reusable for other SoCs.

No functional change, just a rename.

Signed-off-by: Andre Przywara 
Reviewed-by: Jernej Skrabec

sunxi: H616: switch to OF_UPSTREAM

2024-10-09T23:23:41+00:00

With the recent "old-style sunxi" sync and the penultimate OF_UPSTREAM DT
update, both directories were based on the same v6.10 kernel tree.
And while there is one subtle difference in many Allwinner SoC's DT
files, the H616 ones turn out to be identical.

Remove the old copies of the H616 related .dts and .dtsi files, and
switch the whole H616 SoC over to use OF_UPSTREAM. This immediately
benefits from the recent upstream DT update, to kernel v6.11.

Signed-off-by: Andre Przywara

configs: Resync with savedefconfig

2024-01-03T14:09:56+00:00

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini

sunxi: H616: remove default AXP305 selection

2023-12-06T23:09:17+00:00

The original H616 devices released about three years ago were typically
paired with an X-Powers AXP305 PMIC. Newer devices uses the smaller
AXP313, and there seem to be far more systems with this PMIC around now.

Remove the default AXP305 selection for the H616 SoC from the Kconfig,
and move the PMIC selection into the board defconfig files instead.

Signed-off-by: Andre Przywara 
Reviewed-by: Jaehoon Chung

sunxi: H616: add DRAM type selection

2023-07-20T23:54:13+00:00

Allwinner H616 SoC supports several types of DRAM memory. To further
integrate other types of memory, we need to add this delimitation.

Signed-off-by: Mikhail Kalashnikov 
Reviewed-by: Andre Przywara 
Signed-off-by: Andre Przywara

sunxi: H616: enable USB support for H616 boards

2023-07-20T23:28:13+00:00

Now that the PHY driver supports the H616 USB PHY, we can enable USB
support for the two H616 boards.
As the OrangePi Zero2 has a USB-C port hard-wired to peripheral mode,
let's enable USB gadget mode for port 0, so people can use fastboot,
ethernet or mass storage functionality.

Signed-off-by: Andre Przywara 
Reviewed-by: Jernej Skrabec

configs: Resync with savedefconfig

2023-05-01T15:50:26+00:00

Rsync all defconfig files using moveconfig.py

Signed-off-by: Tom Rini

sunxi: Parameterize "unknown feature" in H616 DRAM driver

2023-04-11T23:17:21+00:00

Part of the code, previously known as "unknown feature", also doesn't
have constant values. They are derived from TPR0 parameter in vendor
DRAM code.

Let's move that code to separate function and introduce TPR0 parameter
here too, to ease adding new boards.

Signed-off-by: Jernej Skrabec 
Acked-by: Andre Przywara 
Signed-off-by: Andre Przywara

sunxi: Parameterize bit delay code in H616 DRAM driver

2023-04-11T23:17:21+00:00

These values are highly board specific and thus make sense to add
parameter for them. To ease adding support for new boards, let's make
them same as in vendor DRAM settings.

Signed-off-by: Jernej Skrabec 
Acked-by: Andre Przywara 
Signed-off-by: Andre Przywara