u-boot.git/configs, branch v2020.04 Unnamed repository; edit this file 'description' to name the repository. Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-tegra 2020-04-03T20:05:46+00:00 Tom Rini trini@konsulko.com 2020-04-03T20:05:46+00:00 60f1cc529ccc364e8374945a06ff2f7a2c54fb1e - Add support for Jetson Nano, plus miscellaneous other fixes found during Nano bringup. - Add Igor's update_uboot wrapper patches. 
- Add support for Jetson Nano, plus miscellaneous other fixes found
  during Nano bringup.
- Add Igor's update_uboot wrapper patches.
ARM: tegra: Add NVIDIA Jetson Nano Developer Kit support 2020-04-02T21:30:02+00:00 Tom Warren twarren@nvidia.com 2020-02-28T23:17:07+00:00 7c02bc9649f6d3afd272ac4a94b280495473834c The Jetson Nano Developer Kit is a Tegra X1-based development board. It is similar to Jetson TX1 but it is not pin compatible. It features 4GB of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot used for storage. HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0 and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI Ethernet controller provides onboard network connectivity. NVMe support has also been added. Env save is at the end of QSPI (4MB-8K). A 40-pin header on the board can be used to extend the capabilities and exposed interfaces of the Jetson Nano. Signed-off-by: Thierry Reding <treding@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> 
The Jetson Nano Developer Kit is a Tegra X1-based development board. It
is similar to Jetson TX1 but it is not pin compatible. It features 4GB
of LPDDR4, a SPI NOR flash for early boot firmware and an SD card slot
used for storage.

HDMI 2.0 or DP 1.2 are available for display, four USB ports (3 USB 2.0
and 1 USB 3.0) can be used to attach a variety of peripherals and a PCI
Ethernet controller provides onboard network connectivity. NVMe support
has also been added. Env save is at the end of QSPI (4MB-8K).

A 40-pin header on the board can be used to extend the capabilities and
exposed interfaces of the Jetson Nano.

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
tegra: Enable CONFIG_BOOTP_PREFER_SERVERIP for all Jetson boards 2020-04-02T21:30:01+00:00 Tom Warren twarren@nvidia.com 2020-03-26T22:59:14+00:00 224595abaae918a64fba2625553e51a482ead084 This allows the user to set $serverip in the environment before executing a DHCP request. If they do, U-Boot will use that IP rather than using the IP in the DHCP response. Signed-off-by: Tom Warren <twarren@nvidia.com> Acked-by: Stephen Warren <swarren@nvidia.com> 
This allows the user to set $serverip in the environment before
executing a DHCP request. If they do, U-Boot will use that IP rather
than using the IP in the DHCP response.

Signed-off-by: Tom Warren <twarren@nvidia.com>
Acked-by: Stephen Warren <swarren@nvidia.com>
ARM: tegra: p2771-0000: enable PIE relocation 2020-04-02T21:30:01+00:00 Vishruth vishruthj@nvidia.com 2020-03-26T22:20:43+00:00 c0d436fe892f1cc31bde3426834fe8512bc8a029 U-Boot is configured to build as position independent executable. Enable relocation of RELA section required to work with different load addresses. Signed-off-by: Vishruth <vishruthj@nvidia.com> Signed-off-by: Tom Warren <twarren@nvidia.com> Reviewed-by: Stephen Warren <swarren@nvidia.com> Tested-by: Peter Robinson <probinson@gmail.com> 
U-Boot is configured to build as position independent executable. Enable
relocation of RELA section required to work with different load
addresses.

Signed-off-by: Vishruth <vishruthj@nvidia.com>
Signed-off-by: Tom Warren <twarren@nvidia.com>
Reviewed-by: Stephen Warren <swarren@nvidia.com>
Tested-by: Peter Robinson <probinson@gmail.com>
rockchip: Enable HDMI output on rk3399 board w/ HDMI 2020-04-02T13:50:25+00:00 Jagan Teki jagan@amarulasolutions.com 2020-04-02T11:41:24+00:00 9778edae5576e0a43a13387f9081ce11ef633025 Enable config options and console setting to respective rk3399 board for HDMI output. Boards supported and tested on this patch are: - NanoPc T4 - NanoPi M4 - NanoPi Neo4 - ROC-RK3399-PC - Rock960 Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org> Signed-off-by: Jagan Teki <jagan@amarulasolutions.com> Tested-by: Peter Robinson <pbrobinson@gmail.com> Reviewed-by: Kever Yang <kever.yang@rock-chips.com> 
Enable config options and console setting to respective
rk3399 board for HDMI output.

Boards supported and tested on this patch are:
- NanoPc T4
- NanoPi M4
- NanoPi Neo4
- ROC-RK3399-PC
- Rock960

Cc: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Jagan Teki <jagan@amarulasolutions.com>
Tested-by: Peter Robinson <pbrobinson@gmail.com>
Reviewed-by: Kever Yang <kever.yang@rock-chips.com>
Merge tag 'efi-2020-04-rc5' of https://gitlab.denx.de/u-boot/custodians/u-boot-efi 2020-03-31T14:05:57+00:00 Tom Rini trini@konsulko.com 2020-03-31T14:05:57+00:00 1104dde6e89f3d3ab07284e7c871cc33037f1198 Pull request for UEFI sub-system for efi-2020-04-rc5 This series fixes: * UEFI Python tests CONFIG_OF_CONTROL=y. * int to pointer cast warning for cmd/efidebug.c * memory reservation even if fdt node is disabled Now that the Python test is fixed reintroduce the reverted patch for vexpress_ca9x4 to enable EFI_LOADER and define the dtb file name. 
Pull request for UEFI sub-system for efi-2020-04-rc5

This series fixes:

* UEFI Python tests CONFIG_OF_CONTROL=y.
* int to pointer cast warning for cmd/efidebug.c
* memory reservation even if fdt node is disabled

Now that the Python test is fixed reintroduce the reverted patch for
vexpress_ca9x4 to enable EFI_LOADER and define the dtb file name.
Merge branch 'master' of git://git.denx.de/u-boot-sh 2020-03-31T14:04:39+00:00 Tom Rini trini@konsulko.com 2020-03-31T14:04:39+00:00 962bb2e31bc8d7e4d3885c22b75bdf258c1b6b8a - Fixes for Gen 2 V2H Blanche 
- Fixes for Gen 2 V2H Blanche
Merge https://gitlab.denx.de/u-boot/custodians/u-boot-fsl-qoriq 2020-03-30T18:14:07+00:00 Tom Rini trini@konsulko.com 2020-03-30T11:46:05+00:00 8e4af8f6d83e6d08b10939a9ce994897c6c837aa - Fixes env variable for layerscape platforms, disable hs200. - Fixes board fixup, mux setting, enable gic, fspi on lx2160a, Fixes I2C DM Warning on ls1043a, ls1046a - Fixes RGMII port on ls1046ardb, ls1046ardb and DM_USB Warning on ls1012afrdm, ls1021aiot 
- Fixes env variable for layerscape platforms, disable hs200.
- Fixes board fixup, mux setting, enable gic, fspi on lx2160a, Fixes I2C
  DM Warning on ls1043a, ls1046a
- Fixes RGMII port on ls1046ardb, ls1046ardb and DM_USB Warning on
  ls1012afrdm, ls1021aiot
Merge branch 'master' of https://gitlab.denx.de/u-boot/custodians/u-boot-sunxi 2020-03-30T18:13:59+00:00 Tom Rini trini@konsulko.com 2020-03-30T11:45:25+00:00 3c4fb0e91e25c0a1c9b4a30e66fc87219eb0d827 - SPL SPI support R40, H6 (Andre) - eMMC boot part on a64-olinuxino (Petr) 
- SPL SPI support R40, H6 (Andre)
- eMMC boot part on a64-olinuxino (Petr)
configs: lx2160a: Define ENV_ADDR value 2020-03-30T02:42:13+00:00 Kuldeep Singh kuldeep.singh@nxp.com 2020-02-04T06:32:36+00:00 802dcce869867c76ddbf2c6b8a95221b5fc423b6 CONFIG_ENV_ADDR helps in picking environment from flash before DDR init. Define the value as 0x20500000 for lx2160ardb and lx2160aqds. Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com> Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com> 
CONFIG_ENV_ADDR helps in picking environment from flash before DDR init.
Define the value as 0x20500000 for lx2160ardb and lx2160aqds.

Signed-off-by: Kuldeep Singh <kuldeep.singh@nxp.com>
Reviewed-by: Priyanka Jain <priyanka.jain@nxp.com>