u-boot.git/configs, branch v2022.10

configs: rockchip: Drop TPL_MAX_SIZE definition

2022-09-29T14:10:39Z

The max size is defined at architectural level. On the same commit I have checked mostly all the other architecture and look like they are Fixes: commit ca8a329a1b7f ("Convert CONFIG_SPL_PAD_TO et al to Kconfig") Signed-off-by: Michael Trimarchi Reviewed-by: Tom Rini

kontron-sl-mx8mm: Let CONFIG_SPL_FIT_IMAGE_TINY be selected

2022-09-21T14:19:45Z

When CONFIG_IMX_HAB is selected the 'hab_status' command reports several error events, indicating that the BootROM failed to authenticate the SPL. After inspecting the content of the memory location that corresponds to the DTB load address, the content did not match with the DTB binary, showing that some kind of memory corruption/overlap occurred. Letting the CONFIG_SPL_FIT_IMAGE_TINY option to be selected causes the DTB to be properly placed into RAM and no more overlap occurs. With this change, the 'hab_status' command returns no more error events, which indicates that the BootROM succeeded to authenticate the SPL. Signed-off-by: Fabio Estevam Reviewed-by: Frieder Schrempf

configs: Resync with savedefconfig

2022-09-19T15:22:26Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini

imx8m*_venice_defconfig: fix default bootcmd

2022-09-19T12:53:50Z

commit 970bf8603b87 ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") had an unintended side effect of resulting in a bootcmd env var change for boards like venice that did not have CONFIG_USE_BOOTCOMMAND defined and relied on it being defaulted in include/config_distro_bootcmd.h. Following that patch it instead got defaulted in tools/env/fw_env_private.h Fix this by enabling CONFIG_USE_BOOTCOMMAND for venice. Fixes: commit 970bf8603b87 ("Convert CONFIG_USE_BOOTCOMMAND et al to Kconfig") Signed-off-by: Tim Harvey

bsh: imx6ulz_smm_m2: Add imx6ulz BSH SMM M2 boards

2022-09-18T20:56:18Z

Introduce BSH SystemMaster (SMM) M2 board family, which consists of: imx6ulz SMM M2 and imx6ulz SMM M2 PRO boards. Add support for imx6ulz BSH SMM M2 board: - 128 MiB DDR3 RAM - 256MiB Nand - USBOTG1 peripheral - fastboot. Signed-off-by: Michael Trimarchi Reviewed-by: Fabio Estevam

ARM: imx: Enable SPL GPIO hog on i.MX8M Plus DHCOM

2022-09-18T20:56:10Z

Enable GPIO hog support in SPL to match the GPIO hog support in U-Boot proper. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Peng Fan Cc: Stefano Babic Cc: uboot-imx Reviewed-by: Fabio Estevam

verdin-imx8mm: various config additions and improvements

2022-09-18T20:56:10Z

- integrate bootcount using SNVS_LP general purpose register LPGPR0 - enable link-time optimisation - explicitly set a boot delay of one second - enable CRC32 and MD5 - enable command for low-level access to data in a partition - enable time commands - enable PMIC commands - improve ETHPRIME configuration - enable eMMC HS400 functionality - enable fixed PHY and MDIO driver model - remove stale PFUZE100 PMIC driver - enable thermal management unit driver - enable more USB host functionality - enable hexdump Signed-off-by: Marcel Ziswiler

board: purism: add the Purism Librem5 phone

2022-09-18T20:56:10Z

Initial commit of Librem5 u-boot and SPL Signed-off-by: Angus Ainslie Co-developed-by: Sebastian Krzyszkowiak Signed-off-by: Sebastian Krzyszkowiak Reviewed-by: Fabio Estevam

verdin-imx8mm: verdin-imx8mp: update env memory layout

2022-09-18T20:56:10Z

Update the distro config env memory layout for the Verdin iMX8M Mini and Verdin iMX8M Plus: - loadaddr=0x48280000 allows for 128.5MB area for uncompressing (ie FIT images, kernel_comp_addr_r, kernel_comp_size) - fdt_addr_r = loadaddr + 127.5MB : allows for 127.5MB kernel - scriptaddr = fdt_addr_r + 512KB : allows for 512KB fdt - ramdisk_addr_r = scriptaddr + 512KB : allows for 512KB script Memory layout taken from commit fd5c7173ade4 ("imx8m{m,n}_venice: update env memory layout") but moved loadaddr by an additional 0.5MB to avoid "Moving Image from 0x48200000 to 0x48280000" during booti plus actually defining kernel_comp_size to make booti work. Note that for our regular BSP Layers and Reference Images for Yocto Project an updated distro boot script is required (see meta-toradex-bsp-common/recipes-bsp/u-boot/u-boot-distro-boot). Signed-off-by: Marcel Ziswiler

ARM: imx: Enable USB ethernet on i.MX8M Plus DHCOM

2022-09-18T20:56:09Z

Enable both USB CDC ethernet and USB host ethernet on i.MX8M Plus DHCOM. This is useful for bringing up systems without ethernet plug, but with either USB host or gadget plug. Signed-off-by: Marek Vasut Cc: Fabio Estevam Cc: Peng Fan Cc: Stefano Babic Cc: uboot-imx