u-boot.git/configs, branch v2023.01

board: rockchip: Fix binman_init failure on EVB-RK3568

2023-01-09T13:29:15Z

For some newer SoCs like RK3568, the Rockchip has not released any DDR drivers yet so idbloader needs to create manually using DDR binaries offered by rkbin. This indeed no requirement to enable TPL in the U-Boot source code. If we mark TPL disabled and mark BINMAN enabled by default then there would be an issue of binman_init failure during board relocation. This is true as binman failed to find the top-level node like u-boot-tpl here. Here is the boot issue observed in Radxa-CM3 RK3566 board, U-Boot 2023.01-rc4-00057-gac2505d463-dirty (Jan 04 2023 - 23:44:18 +0530) Model: Radxa Compute Module 3(CM3) IO Board DRAM: 2 GiB binman_init failed:-2 initcall sequence 000000007ffd2008 failed at call 0000000000a18cac (err=-2) ### ERROR ### Please RESET the board ### This might be fixed via binman node in rockchip-u-boot.dtsi however disable BINMAN_FDT for evb-rk3568 defconfig for now as we are at the end of the release cycle. Fixes: 05713d570762 ("rockchip: generate u-boot-rockchip.bin with binman for ARM64 boards") Cc: Quentin Schulz Signed-off-by: Jagan Teki Reviewed-by: Kever Yang

arm: rmobile: rzg2_beacon: Enable alternative Ethernet PHY

2023-01-06T13:14:19Z

Due to the part shortage, the AR8031 PHY was replaced with a Micrel KSZ9131. Enabling both config options keeps backward compatibility with either platform, and both appear to be auto-detected. Signed-off-by: Adam Ford Reviewed-by: Marek Vasut

rockchip: Fix the broken Video out for rk3288 boards

2023-01-06T13:14:19Z

Video out on RK3288 boards has been broken since from few releases due to the adding of reset support on vop but missed enabling DM_RESET on associated boards. This patch fixes those RK3288 boards. Cc: Simon Glass Cc: Lin Huang Cc: Jernej Skrabec Cc: Michael Trimarchi Cc: Arnaud Patard (Rtp) Fixes: <9749d2ea29e1> ("rockchip: video: vop: Add reset support") Reported-by: Manoj Sai Signed-off-by: Jagan Teki Reviewed-by: Simon Glass

configs: Resync with savedefconfig

2022-12-29T18:44:21Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini

PowerPC: Update dependencies on *SYS_MPC85XX_NO_RESETVEC

2022-12-29T18:31:30Z

In 96699f097a02 ("powerpc: mpc85xx: Use binman to embed dtb inside U-Boot") we introduce CONFIG_MPC85XX_HAVE_RESET_VECTOR and do so via Kconfig. However, much later in de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") I converted the symbol that is the inverse of this to Kconfig. This should have included a dependency on the first symbol as they are logically opposite. The dependency being missing lead to some platforms being broken at runtime due to discarding the require reset vector. Fixes: de47ff536363 ("Convert CONFIG_SYS_MPC85XX_NO_RESETVEC to Kconfig") Reported-by: Pali Rohár Signed-off-by: Tom Rini Tested-by: Pali Rohár

PowerPC: Rework PBL location choice

2022-12-29T14:50:53Z

When converting CONFIG_SDCARD and CONFIG_SPIFLASH to Kconfig, one set of uses wasn't converted correctly. Allow for the case where platforms don't rely on "PBL" to boot but instead use other mechanisms. See the link below for more details. Link: https://lore.kernel.org/all/20220802091338.f4g45ldhc7qbg6hm@pali/ Fixes: d433c74eecdc ("Convert CONFIG_SDCARD et al to Kconfig") Tested-by: Pali Rohár Signed-off-by: Tom Rini

Merge tag 'u-boot-rockchip-20221219' of https://source.denx.de/u-boot/custodians/u-boot-rockchip

2022-12-19T13:33:24Z

- Only call binman when TPL available; - rk3128 DTS fix; - Fix GPT table corruption for rk3399 puma ; - Fix i2c for rk3399 Pinebookpro; - Enable UEFI capsule update for RockPi4;

rockpi4: capsule: Enable UEFI capsule update on RockPi4 boards

2022-12-19T02:56:12Z

Enable the UEFI capsule update functionality on the RockPi4B and RockPi4C boards. Support is being enabled for updating the idbloader and u-boot firmware images residing on GPT partitioned uSD card storage device. Signed-off-by: Sughosh Ganu Reviewed-by: Kever Yang

rockchip: puma: fix GPT table corruption when saving U-Boot environment

2022-12-19T02:56:12Z

The GPT table is taking the first 34 sectors, which amounts to 0x4400 bytes. Saving the environment below this address in storage will corrupt the GPT table. While technically the table ends at 0x4400, some tools (e.g. bmaptool) are rounding everything to the logical block size (0x1000), so it is safer to make it point to 0x5000 so that the environment could still persist when flashing a sparse image with bmaptool or similar tools. Obviously, the default 0x4000 environment size does not work anymore, so let's set it to 0x3000 so it does fill the gap between the GPT table (rounded to 0x1000) and the start of the idbloader.img. Fixes: 56f580d3eb8d ("rockchip: dts: rk3399-puma: put environment (in MMC/SD configurations) before SPL") Cc: Quentin Schulz Signed-off-by: Quentin Schulz Reviewed-by: Kever Yang

arm: dts: rockchip: enable ums/rockusb command for ROCK Pi 4

2022-12-19T02:56:12Z

this patch add USB mass storage function and Rockusb function for Radxa ROCK Pi 4 series. Signed-off-by: FUKAUMI Naoki Reviewed-by: Kever Yang