u-boot.git/configs, branch v2023.07

rockchip: Restore support for boot scripts in legacy image format

2023-07-03T14:20:13Z

Use of CONFIG_SPL_FIT_SIGNATURE=y cause CONFIG_LEGACY_IMAGE_FORMAT=n as default, this prevent boot scripts in legacy image format from working and was an unintended change in the listed fixes commits: Wrong image format for "source" command Add CONFIG_LEGACY_IMAGE_FORMAT=y to defconfig for affected boards to restore support for boot scripts in legacy image format. Fixes: 3bf8e4080763 ("board: rockchip: add Radxa ROCK5B Rk3588 board") Fixes: cf777572ca31 ("rockchip: rockpro64: Use SDMA to boost eMMC performance") Fixes: 6e2b8344d60c ("rockchip: rock-pi-4: Use SDMA to boost eMMC performance") Fixes: 1bf49d5a4a7c ("rockchip: rk3566-radxa-cm3-io: Update defconfig") Fixes: 703c170b40f2 ("rockchip: rk3568-evb: Update defconfig") Fixes: 68000f750acd ("rockchip: rk3568-rock-3a: Update defconfig") Fixes: 6fb02589a608 ("rockchip: rk3588-evb: Update defconfig") Signed-off-by: Jonas Karlman

board: freescale: imx93_evk: Fix MMC environment offset boot conflict.

2023-06-29T13:55:45Z

Currently, the imx93_evk is configured with CONFIG_ENV_IS_IN_MMC and the chosen environment offset in the config is 0x400000. Unless the user programs the associated fuses, this offset is the default secondary boot image offset used by the i.MX 93 ROM bootloader. With certain combinations of environmental variables, the CRC and beginning of the environment can potentially falsely appear as a valid boot image container header. If the expected "sw_version" offset within this mistaken boot image container is greater than the primary's, the ROM bootloader can skip booting of the primary image altogether and attempt to boot with the content of the environment data. This will then hang the system. To fix this, move the environment from 0x400000 to 0x700000 reserving up to 3 MB at 0x400000 for any actual secondary user image container. Signed-off-by: Ken Sloat Reviewed-by: Peng Fan Reviewed-by: Fabio Estevam

configs: Resync with savedefconfig

2023-06-26T15:43:56Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini

smegw01: Fix duplicate bootcmd

2023-06-26T15:30:22Z

Two conflicting bootcmds were included in the environment. Streamline to defining the bootcmd only in the env file. Signed-off-by: Eduard Strehlau Signed-off-by: Fabio Estevam

ARM: at91: Switch sama5d2_icp_mmc to simple malloc in SPL

2023-06-24T17:46:57Z

To avoid SRAM overflow in the SPL build, use simple malloc implementation. Signed-off-by: Marek Vasut

rockchip: Pinephone Pro: Add DDR RAM type config

2023-06-14T19:48:45Z

Add the RAM_ROCKCHIP_LPDDR4 to fix the Pinephone Pro booting. When the configs were updated in 26f92be07e2 it somehow broke the PPP boot process so let's fix it. Signed-off-by: Peter Robinson CC: Jagan Teki CC: Kever Yang

sunxi: defconfig: Add Lctech Pi F1C200s board

2023-06-07T21:44:40Z

The Lctech Pi F1C200s (also previously known under the Cherry Pi brand) is a small development board with the Allwinner F1C200s SoC. This is the same as the F1C100s, but with 64MB instead of 32MB co-packaged DRAM. Add a defconfig for this board, enabling the most basic features. This uses the new 64MB memory map, which avoids the very tight memory map we use for the 32MB F1C100s board(s). The devicetree file is already in the tree, courtesy of the previous Linux repo sync. Signed-off-by: Andre Przywara

Kconfig: j721e: Change K3_MCU_SCRATCHPAD_BASE to non firewalled region

2023-05-30T19:13:43Z

In non-combined boot flow for K3, all the firewalls are locked by default until sysfw comes up. Rom configures some of the firewall for its usage along with the SRAM for R5 but the PSRAM region is still locked. The K3 MCU Scratchpad for j721e was set to a PSRAM region triggering the firewall exception before sysfw came up. The exception started happening after adding multi dtb support that accesses the scratchpad for reading EEPROM contents. The commit changes R5 MCU scratchpad for j721e to an SRAM region. Old Map: ┌─────────────────────────────────────┐ 0x41c00000 │ SPL │ ├─────────────────────────────────────┤ 0x41c40000 (approx) │ STACK │ ├─────────────────────────────────────┤ 0x41c85b20 │ Global data │ │ sizeof(struct global_data) = 0xd8 │ ├─────────────────────────────────────┤ gd->malloc_base = 0x41c85bfc │ HEAP │ │ CONFIG_SYS_MALLOC_F_LEN = 0x70000 │ ├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR │ SPL BSS │ (0x41cf5bfc) │ CONFIG_SPL_BSS_MAX_SIZE = 0xA000 │ └─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX (0x41cffbfc) New Map: ┌─────────────────────────────────────┐ 0x41c00000 │ SPL │ ├─────────────────────────────────────┤ 0x41c40000 (approx) │ EMPTY │ ├─────────────────────────────────────┤ 0x41c81920 │ STACK │ │ SPL_SIZE_LIMIT_PROVIDE_STACK=0x4000 │ ├─────────────────────────────────────┤ 0x41c85920 │ Global data │ │ sizeof(struct global_data) = 0xd8 │ ├─────────────────────────────────────┤ gd->malloc_base = 0x41c859f0 │ HEAP │ │ CONFIG_SYS_MALLOC_F_LEN = 0x70000 │ ├─────────────────────────────────────┤ CONFIG_SPL_BSS_START_ADDR │ SPL BSS │ (0x41cf59f0) │ CONFIG_SPL_BSS_MAX_SIZE = 0xA000 │ ├─────────────────────────────────────┤ 0x41cff9fc │ NEW MCU SCRATCHPAD │ │ SYS_K3_MCU_SCRATCHPAD_SIZE = 0x200 │ └─────────────────────────────────────┘ CONFIG_SYS_K3_BOOT_PARAM_TABLE_INDEX (0x41cffbfc) Fixes: ab977c8b91b4 ("configs: j721s2_evm_r5: Enable support for building multiple dtbs into FIT") Signed-off-by: Manorit Chawdhry [n-francis@ti.com: SRAM allocation addressing diagram] Signed-off-by: Neha Francis Reviewed-by: Tom Rini Reviewed-by: Kamlesh Gurudasani

configs: j721e: Merge the HS and non-HS defconfigs

2023-05-30T19:13:43Z

K3 devices have runtime type board detection. Make the default defconfig include the secure configuration. Then remove the HS specific config. Non-HS devices will continue to boot due to runtime device type detection. If TI_SECURE_DEV_PKG is not set the build will emit warnings, for non-HS devices these can be ignored. Reviewed-by: Bryan Brattlof Reviewed-by: Neha Malcom Francis Acked-by: Andrew Davis Signed-off-by: Manorit Chawdhry

configs: Resync with savedefconfig

2023-05-29T14:43:26Z

Rsync all defconfig files using moveconfig.py Signed-off-by: Tom Rini