The X96Q is a set-top box with an H313 SoC, AXP305 PMIC, 1 or 2 GiB RAM,
8 or 16 GiB eMMC flash, 2x USB A, Micro-SD, HDMI, Ethernet, audio/video
output, and infrared input.

  https://x96mini.com/products/x96q-tv-box-android-10-set-top-box

This commit adds a defconfig and some documentation. The devicetree is
already in dts/upstream.

The CONFIG_DRAM_SUNXI_* settings are chosen such that the register
values in the DRAM PHY's MMIO space are as close as possible to those
observed when booting with the preinstalled vendor U-Boot. The DRAM
clock frequency of 600 MHz was reported in the vendor U-Boot's output.

Signed-off-by: J. Neuschäfer <j.ne@posteo.net>
Reviewed-by: Andre Przywara <andre.przywara@arm.com>

Greg Malysa <malysagreg@gmail.com> says:

This series adds the final pieces to enable mainline U-Boot to build and
boot all Analog Devices SC5xx SoCs and supports the associated carrier
board options. At this point it should be viable for new users for these
platforms to start with the latest version of U-Boot rather than our
vendor fork, however some features (such as OSPI support and falcon
boot) remain unavailable until we are able to unify our implementations
with the mainline implementations.

Link: https://lore.kernel.org/r/20251211080414.5363-1-malysagreg@gmail.com
[trini: Rebuild CI containers to have new tools]
Signed-off-by: Tom Rini <trini@konsulko.com>

This adds support for the Analog Devices SC594 SOM and configurations
for using it with both the SOMCRR-EZKIT and SOMCRR-EZLITE.

Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>

This adds support for the Analog Devices SC598-SOM and configurations
for using it with both the SOMCRR-EZKIT and SOMCRR-EZLITE. This adds
dtsis for both Rev D (including older revisions) and Rev E SOMs, which
are not compatible due to BOM changes. Although no new Rev D SOMs are
produced as of 2025, many are in circulation, so the RevD dtsi is
included to facilitate use for existing customers.

Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Signed-off-by: Philip Molloy <philip@philipmolloy.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>

This adds support for the Analog Devices SC584-EZKIT.

Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>

This adds support for the Analog Devices SC589-EZKIT and SC589-mini.

Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>

This adds support for the Analog Devices SC573 EZKIT.

Signed-off-by: Vasileios Bimpikas <vasileios.bimpikas@analog.com>
Signed-off-by: Utsav Agarwal <utsav.agarwal@analog.com>
Signed-off-by: Arturs Artamonovs <arturs.artamonovs@analog.com>
Signed-off-by: Nathan Barrett-Morrison <nathan.morrison@timesys.com>
Signed-off-by: Caleb Ethridge <caleb.ethridge@analog.com>
Signed-off-by: Philip Molloy <philip.molloy@analog.com>
Signed-off-by: Greg Malysa <malysagreg@gmail.com>

This series from Wadim Egorov <w.egorov@phytec.de> performs some
improvements to some of the phycore am6xx series devices.

Link: https://lore.kernel.org/r/20260113053531.1204984-1-w.egorov@phytec.de

BOOTP does not support dynamic lease expiration. Using random MAC
addresses on R5 network boot binaries would result in continuously
allocated IPs without proper release.

Since only one interface is enabled for network boot, rely on the
MAC address provided by the efuses instead.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>

BOOTP does not support dynamic lease expiration. Using random MAC
addresses on R5 network boot binaries would result in continuously
allocated IPs without proper release.

Since only one interface is enabled for network boot, rely on the
MAC address provided by the efuses instead.

Signed-off-by: Daniel Schultz <d.schultz@phytec.de>
Signed-off-by: Wadim Egorov <w.egorov@phytec.de>