ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

2010-04-13T07:13:16Z

Signed-off-by: Peter Tyser

General code modification for mpc7448hpc2 board support.

2006-11-02T10:49:51Z

1. Add 7447A and 7448 processor support. 2. Add the following flags. CFG_CONFIG_BUS_CLK : If the 74xx bus frequency can be configured dynamically (such as by switch on board), this flag should be set. CFG_EXCEPTION_AFTER_RELOCATE: If an exception occurs after the u-boot relocates to RAM, this flag should be set. CFG_SERIAL_HANG_IN_EXCEPTION: If the print out function will cause the system hang in exception, this flag should be set. There is a design issue for tsi108/109 pci configure read. When pci scan the slots, if there is no pci card, the tsi108/9 will cause a machine check exception for mpc7448 processor. Signed-off-by: Alexandre Bounine Signed-off-by: Roy Zang

* Patch by Ronen Shitrit, 10 Dec 2003:

2004-01-03T00:43:19Z

Add support for the Marvell DB64360 / DB64460 development boards * Patch by Detlev Zundel, 10 Dec 2003: fix dependency problem in examples/Makefile

Initial revision

2002-08-27T09:48:53Z

u-boot.git/cpu/74xx_7xx/cpu_init.c, branch main

ppc: Move cpu/$CPU to arch/ppc/cpu/$CPU

General code modification for mpc7448hpc2 board support.

* Patch by Ronen Shitrit, 10 Dec 2003:

Initial revision