u-boot.git/cpu/arm1136, branch v2009.08-rc2Unnamed repository; edit this file 'description' to name the repository.http://cgit.235523.xyz/u-boot.git/atom/cpu/arm1136?h=v2009.08-rc22009-06-21T14:18:13Zi.MX31: Create a common device file.2009-06-21T14:18:13ZMagnus Liljalilja.magnus@gmail.com2009-06-13T18:50:03Zurn:sha1:dd2f6965a6c71f6f711ec98827880152e022c236
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
MX31: Add NAND SPL for i.MX31.2009-06-21T14:18:12ZMagnus Liljalilja.magnus@gmail.com2009-06-13T18:50:01Zurn:sha1:40c642bc19b9fa2906e3172487a522fee456340b
This patch adds the NAND SPL framework needed to boot i.MX31 boards
from NAND.
It has been tested on a i.MX31 PDK board with large page NAND. Small
page NANDs should work as well, but this has not been tested.
Note: The i.MX31 NFC uses a non-standard layout for large page NANDs,
whether this is compatible with a particular setup depends on how
the NAND device is programmed by the flash programmer (e.g. JTAG
debugger).
The patch is based on the work by Maxim Artamonov.
Signed-off-by: Maxim Artamonov <scn1874@yandex.ru>
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
ARM1136: Introduce CONFIG_PRELOADER macro.2009-06-21T14:18:12ZMagnus Liljalilja.magnus@gmail.com2009-06-13T18:50:00Zurn:sha1:df81238b3e27a791da996a9208402ac8f40b9862
Currently CONFIG_ONENAND_IPL is used in a number of #ifdef's
in start.S. In preparation for adding support for NAND SPL
the macro CONFIG_PRELOADER is introducted and replaces the
CONFIG_ONENAND_IPL in start.S.
Signed-off-by: Magnus Lilja <lilja.magnus@gmail.com>
omap24xx: rename reset file2009-06-12T18:39:53ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-31T10:44:43Zurn:sha1:61cf851b09cf8b67009ec11fc47c16add6b142a5
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
arm: remove cpu_init2009-06-12T18:39:52ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-09T11:21:19Zurn:sha1:ad7e8aac6920f8b8a85b3cc2e93bca7458e99aa1
move s3c44b0 to arch_cpu_init and as noone use cpu_init remove it
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
arm: unify interrupt init2009-06-12T18:39:52ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-09T11:21:18Zurn:sha1:c358d9c3f16571e8f825e81b75eaf32e228cb669
all arm init the IRQ stack the same way
so unify it in lib_arm/interrupts.c and then call arch specific interrupt init
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
arm: unify linker script2009-06-12T18:39:52ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-08T18:24:12Zurn:sha1:10a451cd57cffbca875c97bbd8929059c5627ec6
all arm boards except a few use the same cpu linker script
so move it to cpu/$(CPU)
that could be overwrite in following order
SOC
BOARD
via the corresponding config.mk
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
arm: timer and interrupt init rework2009-06-12T18:39:48ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-05-15T21:47:02Zurn:sha1:b54384e3ba6b5535751f317fcd3940a53eed0d3a
actually the timer init use the interrupt_init as init callback
which make the interrupt and timer implementation difficult to follow
so now rename it as int timer_init(void) and use interrupt_init for interrupt
btw also remane the corresponding file to the functionnality implemented
as ixp arch implement two timer - one based on interrupt - so all the timer
related code is moved to timer.c
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
Fix e-mail address of Gary Jennejohn.2009-05-15T20:11:59ZDetlev Zundeldzu@denx.de2009-05-13T08:54:10Zurn:sha1:792a09eb9d5d8c4f74b7e9f2e887316d511a4e80
Signed-off-by: Detlev Zundel <dzu@denx.de>
arm: unify reset command2009-04-05T11:08:03ZJean-Christophe PLAGNIOL-VILLARDplagnioj@jcrosoft.com2009-04-05T11:08:03Zurn:sha1:ab298231518675b3784aea88ee9b978438f99e63
Signed-off-by: Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>